🎨 Apply F() to kill / sendinfoscreen

Marlin/src/MarlinCore.cpp

@@ -852,16 +852,16 @@ void idle(bool no_stepper_sleep/*=false*/) {
  * Kill all activity and lock the machine.
  * After this the machine will need to be reset.
  */
-void kill(PGM_P const lcd_error/*=nullptr*/, PGM_P const lcd_component/*=nullptr*/, const bool steppers_off/*=false*/) {
+void kill(FSTR_P const lcd_error/*=nullptr*/, FSTR_P const lcd_component/*=nullptr*/, const bool steppers_off/*=false*/) {
   thermalManager.disable_all_heaters();
 
   TERN_(HAS_CUTTER, cutter.kill()); // Full cutter shutdown including ISR control
 
   // Echo the LCD message to serial for extra context
-  if (lcd_error) { SERIAL_ECHO_START(); SERIAL_ECHOLNPGM_P(lcd_error); }
+  if (lcd_error) { SERIAL_ECHO_START(); SERIAL_ECHOLNF(lcd_error); }
 
   #if EITHER(HAS_DISPLAY, DWIN_CREALITY_LCD_ENHANCED)
-    ui.kill_screen(lcd_error ?: GET_TEXT(MSG_KILLED), lcd_component ?: NUL_STR);
+    ui.kill_screen(lcd_error ?: GET_TEXT_F(MSG_KILLED), lcd_component ?: FPSTR(NUL_STR));
   #else
     UNUSED(lcd_error); UNUSED(lcd_component);
   #endif

Marlin/src/MarlinCore.h

@@ -38,7 +38,7 @@ inline void idle_no_sleep() { idle(true); }
   extern bool G38_did_trigger;      // Flag from the ISR to indicate the endstop changed
 #endif
 
-void kill(PGM_P const lcd_error=nullptr, PGM_P const lcd_component=nullptr, const bool steppers_off=false);
+void kill(FSTR_P const lcd_error=nullptr, FSTR_P const lcd_component=nullptr, const bool steppers_off=false);
 void minkill(const bool steppers_off=false);
 
 // Global State of the firmware

Marlin/src/feature/direct_stepping.cpp

@@ -174,7 +174,7 @@ namespace DirectStepping {
   template <typename Cfg>
   void SerialPageManager<Cfg>::write_responses() {
     if (fatal_error) {
-      kill(GET_TEXT(MSG_BAD_PAGE));
+      kill(GET_TEXT_F(MSG_BAD_PAGE));
       return;
     }
 

Marlin/src/feature/encoder_i2c.cpp

@@ -153,7 +153,7 @@ void I2CPositionEncoder::update() {
 
     #ifdef I2CPE_ERR_THRESH_ABORT
       if (ABS(error) > I2CPE_ERR_THRESH_ABORT * planner.settings.axis_steps_per_mm[encoderAxis]) {
-        //kill(PSTR("Significant Error"));
+        //kill(F("Significant Error"));
         SERIAL_ECHOLNPGM("Axis error over threshold, aborting!", error);
         safe_delay(5000);
       }

Marlin/src/feature/mmu/mmu2.cpp

@@ -448,7 +448,7 @@ bool MMU2::rx_ok() {
 void MMU2::check_version() {
   if (buildnr < MMU_REQUIRED_FW_BUILDNR) {
     SERIAL_ERROR_MSG("Invalid MMU2 firmware. Version >= " STRINGIFY(MMU_REQUIRED_FW_BUILDNR) " required.");
-    kill(GET_TEXT(MSG_KILL_MMU2_FIRMWARE));
+    kill(GET_TEXT_F(MSG_KILL_MMU2_FIRMWARE));
   }
 }
 

Marlin/src/feature/pause.cpp

@@ -254,7 +254,7 @@ bool load_filament(const_float_t slow_load_length/*=0*/, const_float_t fast_load
 
     TERN_(EXTENSIBLE_UI, ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_FILAMENT_CHANGE_PURGE)));
     TERN_(HOST_PROMPT_SUPPORT, host_prompt_do(PROMPT_USER_CONTINUE, GET_TEXT_F(MSG_FILAMENT_CHANGE_PURGE), FPSTR(CONTINUE_STR)));
-    TERN_(DWIN_CREALITY_LCD_ENHANCED, DWIN_Popup_Confirm(ICON_BLTouch, GET_TEXT(MSG_FILAMENT_CHANGE_PURGE), CONTINUE_STR));
+    TERN_(DWIN_CREALITY_LCD_ENHANCED, DWIN_Popup_Confirm(ICON_BLTouch, GET_TEXT_F(MSG_FILAMENT_CHANGE_PURGE), FPSTR(CONTINUE_STR)));
     wait_for_user = true; // A click or M108 breaks the purge_length loop
     for (float purge_count = purge_length; purge_count > 0 && wait_for_user; --purge_count)
       unscaled_e_move(1, ADVANCED_PAUSE_PURGE_FEEDRATE);

Marlin/src/feature/powerloss.cpp

@@ -301,7 +301,7 @@ void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=POW
       retract_and_lift(zraise);
     #endif
 
-    kill(GET_TEXT(MSG_OUTAGE_RECOVERY));
+    kill(GET_TEXT_F(MSG_OUTAGE_RECOVERY));
   }
 
 #endif

Marlin/src/feature/tmc_util.cpp

@@ -212,7 +212,7 @@
       if (data.is_ot) SERIAL_ECHOLNPGM("overtemperature");
       if (data.is_s2g) SERIAL_ECHOLNPGM("coil short circuit");
       TERN_(TMC_DEBUG, tmc_report_all());
-      kill(PSTR("Driver error"));
+      kill(F("Driver error"));
     }
   #endif
 

Marlin/src/gcode/control/M108_M112_M410.cpp

@@ -40,7 +40,7 @@ void GcodeSuite::M108() {
  * M112: Full Shutdown
  */
 void GcodeSuite::M112() {
-  kill(M112_KILL_STR, nullptr, true);
+  kill(FPSTR(M112_KILL_STR), nullptr, true);
 }
 
 /**

Marlin/src/gcode/gcode.cpp

@@ -262,7 +262,7 @@ void GcodeSuite::dwell(millis_t time) {
       #ifdef ACTION_ON_CANCEL
         host_action_cancel();
       #endif
-      kill(GET_TEXT(MSG_LCD_PROBING_FAILED));
+      kill(GET_TEXT_F(MSG_LCD_PROBING_FAILED));
     #endif
   }
 

Marlin/src/gcode/gcode_d.cpp

@@ -58,7 +58,7 @@ void GcodeSuite::D(const int16_t dcode) {
       break;
 
     case 10:
-      kill(PSTR("D10"), PSTR("KILL TEST"), parser.seen_test('P'));
+      kill(F("D10"), F("KILL TEST"), parser.seen_test('P'));
       break;
 
     case 1: {

Marlin/src/gcode/host/M16.cpp

@@ -33,7 +33,7 @@
 void GcodeSuite::M16() {
 
   if (strcmp_P(parser.string_arg, PSTR(MACHINE_NAME)))
-    kill(GET_TEXT(MSG_KILL_EXPECTED_PRINTER));
+    kill(GET_TEXT_F(MSG_KILL_EXPECTED_PRINTER));
 
 }
 

Marlin/src/gcode/lcd/M0_M1.cpp

@@ -67,7 +67,7 @@ void GcodeSuite::M0_M1() {
 
   #elif ENABLED(EXTENSIBLE_UI)
     if (parser.string_arg)
-      ExtUI::onUserConfirmRequired(parser.string_arg); // Can this take an SRAM string??
+      ExtUI::onUserConfirmRequired(parser.string_arg); // String in an SRAM buffer
     else
       ExtUI::onUserConfirmRequired(GET_TEXT_F(MSG_USERWAIT));
   #elif ENABLED(DWIN_CREALITY_LCD_ENHANCED)

Marlin/src/gcode/queue.cpp

@@ -523,7 +523,7 @@ void GCodeQueue::get_serial_commands() {
           // Process critical commands early
           if (command[0] == 'M') switch (command[3]) {
             case '8': if (command[2] == '0' && command[1] == '1') { wait_for_heatup = false; TERN_(HAS_LCD_MENU, wait_for_user = false); } break;
-            case '2': if (command[2] == '1' && command[1] == '1') kill(M112_KILL_STR, nullptr, true); break;
+            case '2': if (command[2] == '1' && command[1] == '1') kill(FPSTR(M112_KILL_STR), nullptr, true); break;
             case '0': if (command[1] == '4' && command[2] == '1') quickstop_stepper(); break;
           }
         #endif

Marlin/src/lcd/e3v2/enhanced/dwin.cpp

@@ -1852,7 +1852,7 @@ void DWIN_LoadSettings(const char *buff) {
   feedrate_percentage = 100;
 }
 
-void MarlinUI::kill_screen(PGM_P lcd_error, PGM_P lcd_component) {
+void MarlinUI::kill_screen(FSTR_P const lcd_error, FSTR_P const lcd_component) {
   DWIN_Draw_Popup(ICON_BLTouch, lcd_error, lcd_component);
   DWIN_UpdateLCD();
 }

Marlin/src/lcd/e3v2/jyersui/dwin.cpp

@@ -949,7 +949,7 @@ void CrealityDWINClass::Draw_Popup(FSTR_P const line1, FSTR_P const line2, FSTR_
   }
 }
 
-void MarlinUI::kill_screen(PGM_P const error, PGM_P const component) {
+void MarlinUI::kill_screen(FSTR_P const error, FSTR_P const) {
   CrealityDWIN.Draw_Popup(F("Printer Kill Reason:"), error, F("Restart Required"), Wait, ICON_BLTouch);
 }
 

Marlin/src/lcd/extui/anycubic_chiron/chiron_extui.cpp

@@ -41,8 +41,8 @@ namespace ExtUI {
 
   void onIdle() { Chiron.IdleLoop(); }
 
-  void onPrinterKilled(PGM_P const error, PGM_P const component) {
-    Chiron.PrinterKilled(error,component);
+  void onPrinterKilled(FSTR_P const error, FSTR_P const component) {
+    Chiron.PrinterKilled(error, component);
   }
 
   void onMediaInserted() { Chiron.MediaEvent(AC_media_inserted); }

Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.cpp

@@ -126,7 +126,7 @@ void ChironTFT::IdleLoop()  {
   CheckHeaters();
 }
 
-void ChironTFT::PrinterKilled(PGM_P error,PGM_P component)  {
+void ChironTFT::PrinterKilled(FSTR_P const error, FSTR_P const component)  {
   SendtoTFTLN(AC_msg_kill_lcd);
   #if ACDEBUG(AC_MARLIN)
     SERIAL_ECHOLNPGM("PrinterKilled()\nerror: ", error , "\ncomponent: ", component);

Marlin/src/lcd/extui/anycubic_chiron/chiron_tft.h

@@ -59,7 +59,7 @@ class ChironTFT {
   public:
     static void Startup();
     static void IdleLoop();
-    static void PrinterKilled(PGM_P, PGM_P);
+    static void PrinterKilled(FSTR_P, FSTR_P);
     static void MediaEvent(media_event_t);
     static void TimerEvent(timer_event_t);
     static void FilamentRunout();

Marlin/src/lcd/extui/anycubic_i3mega/anycubic_extui.cpp

@@ -37,7 +37,7 @@ namespace ExtUI {
 
   void onStartup()        { AnycubicTFT.OnSetup(); }
   void onIdle()           { AnycubicTFT.OnCommandScan(); }
-  void onPrinterKilled(PGM_P const error, PGM_P const component) { AnycubicTFT.OnKillTFT(); }
+  void onPrinterKilled(FSTR_P const error, FSTR_P const component) { AnycubicTFT.OnKillTFT(); }
   void onMediaInserted()  { AnycubicTFT.OnSDCardStateChange(true); }
   void onMediaError()     { AnycubicTFT.OnSDCardError(); }
   void onMediaRemoved()   { AnycubicTFT.OnSDCardStateChange(false); }

Marlin/src/lcd/extui/anycubic_i3mega/anycubic_i3mega_lcd.cpp

@@ -654,7 +654,7 @@ void AnycubicTFTClass::GetCommandFromTFT() {
             break;
 
           case 12: // A12 kill
-            kill(PSTR(STR_ERR_KILLED));
+            kill(F(STR_ERR_KILLED));
             break;
 
           case 13: // A13 SELECTION FILE

Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp

@@ -340,7 +340,7 @@ void DGUSScreenHandler::DGUSLCD_SendHeaterStatusToDisplay(DGUS_VP_Variable &var)
 
   void DGUSScreenHandler::SDCardError() {
     DGUSScreenHandler::SDCardRemoved();
-    sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("SD card error"), nullptr, true, true, true, true);
+    sendinfoscreen(F("NOTICE"), nullptr, F("SD card error"), nullptr, true, true, true, true);
     SetupConfirmAction(nullptr);
     GotoScreen(DGUSLCD_SCREEN_POPUP);
   }
@@ -567,7 +567,7 @@ void DGUSScreenHandler::HandleStepPerMMExtruderChanged(DGUS_VP_Variable &var, vo
     if (buf[0]) queue.enqueue_one_now(buf);
 
     #if ENABLED(DGUS_UI_WAITING)
-      sendinfoscreen(PSTR("PID is autotuning"), PSTR("please wait"), NUL_STR, NUL_STR, true, true, true, true);
+      sendinfoscreen(F("PID is autotuning"), F("please wait"), NUL_STR, NUL_STR, true, true, true, true);
       GotoScreen(DGUSLCD_SCREEN_WAITING);
     #endif
   }

Marlin/src/lcd/extui/dgus/dgus_extui.cpp

@@ -42,8 +42,8 @@ namespace ExtUI {
 
   void onIdle() { ScreenHandler.loop(); }
 
-  void onPrinterKilled(PGM_P const error, PGM_P const component) {
-    ScreenHandler.sendinfoscreen(GET_TEXT(MSG_HALTED), error, NUL_STR, GET_TEXT(MSG_PLEASE_RESET), true, true, true, true);
+  void onPrinterKilled(FSTR_P const error, FSTR_P const) {
+    ScreenHandler.sendinfoscreen(GET_TEXT_F(MSG_HALTED), error, FPSTR(NUL_STR), GET_TEXT_F(MSG_PLEASE_RESET), true, true, true, true);
     ScreenHandler.GotoScreen(DGUSLCD_SCREEN_KILL);
     while (!ScreenHandler.loop());  // Wait while anything is left to be sent
   }
@@ -60,7 +60,7 @@ namespace ExtUI {
 
   void onUserConfirmRequired(const char * const msg) {
     if (msg) {
-      ScreenHandler.sendinfoscreen(PSTR("Please confirm."), nullptr, msg, nullptr, true, true, false, true);
+      ScreenHandler.sendinfoscreen(F("Please confirm."), nullptr, msg, nullptr, true, true, false, true);
       ScreenHandler.SetupConfirmAction(setUserConfirmed);
       ScreenHandler.GotoScreen(DGUSLCD_SCREEN_POPUP);
     }

Marlin/src/lcd/extui/dgus/fysetc/DGUSScreenHandler.h

@@ -38,6 +38,12 @@ class DGUSScreenHandler {
   // Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen
   // The bools specifying whether the strings are in RAM or FLASH.
   static void sendinfoscreen(const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+  static inline void sendinfoscreen(FSTR_P const line1, FSTR_P const line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash) {
+    sendinfoscreen(FTOP(line1), FTOP(line2), line3, line4, l1inflash, l2inflash, l3inflash, liinflash);
+  }
+  static inline void sendinfoscreen(FSTR_P const line1, FSTR_P const line2, FSTR_P const line3, FSTR_P const line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash) {
+    sendinfoscreen(FTOP(line1), FTOP(line2), FTOP(line3), FTOP(line4), l1inflash, l2inflash, l3inflash, liinflash);
+  }
 
   static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
 

Marlin/src/lcd/extui/dgus/hiprecy/DGUSScreenHandler.h

@@ -38,6 +38,12 @@ class DGUSScreenHandler {
   // Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen
   // The bools specifying whether the strings are in RAM or FLASH.
   static void sendinfoscreen(const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+  static inline void sendinfoscreen(FSTR_P const line1, FSTR_P const line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash) {
+    sendinfoscreen(FTOP(line1), FTOP(line2), line3, line4, l1inflash, l2inflash, l3inflash, liinflash);
+  }
+  static inline void sendinfoscreen(FSTR_P const line1, FSTR_P const line2, FSTR_P const line3, FSTR_P const line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash) {
+    sendinfoscreen(FTOP(line1), FTOP(line2), FTOP(line3), FTOP(line4), l1inflash, l2inflash, l3inflash, liinflash);
+  }
 
   static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
 

Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp

@@ -1233,7 +1233,7 @@ void DGUSScreenHandler::MKS_FilamentLoadUnload(DGUS_VP_Variable &var, void *val_
   #if BOTH(HAS_HOTEND, PREVENT_COLD_EXTRUSION)
     if (hotend_too_cold) {
       if (thermalManager.targetTooColdToExtrude(hotend_too_cold - 1)) thermalManager.setTargetHotend(thermalManager.extrude_min_temp, hotend_too_cold - 1);
-      sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please wait."), PSTR("Nozzle heating!"), true, true, true, true);
+      sendinfoscreen(F("NOTICE"), nullptr, F("Please wait."), F("Nozzle heating!"), true, true, true, true);
       SetupConfirmAction(nullptr);
       GotoScreen(DGUSLCD_SCREEN_POPUP);
     }
@@ -1489,7 +1489,7 @@ void DGUSScreenHandler::DGUS_Runout_Idle(void) {
         queue.inject(F("M25"));
         GotoScreen(MKSLCD_SCREEN_PAUSE);
 
-        sendinfoscreen(PSTR("NOTICE"), nullptr, PSTR("Please change filament!"), nullptr, true, true, true, true);
+        sendinfoscreen(F("NOTICE"), nullptr, F("Please change filament!"), nullptr, true, true, true, true);
         //SetupConfirmAction(nullptr);
         GotoScreen(DGUSLCD_SCREEN_POPUP);
         break;

Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.h

@@ -38,6 +38,12 @@ class DGUSScreenHandler {
   // Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen
   // The bools specifying whether the strings are in RAM or FLASH.
   static void sendinfoscreen(const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+  static inline void sendinfoscreen(FSTR_P const line1, FSTR_P const line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash) {
+    sendinfoscreen(FTOP(line1), FTOP(line2), line3, line4, l1inflash, l2inflash, l3inflash, liinflash);
+  }
+  static inline void sendinfoscreen(FSTR_P const line1, FSTR_P const line2, FSTR_P const line3, FSTR_P const line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash) {
+    sendinfoscreen(FTOP(line1), FTOP(line2), FTOP(line3), FTOP(line4), l1inflash, l2inflash, l3inflash, liinflash);
+  }
 
   static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
 

Marlin/src/lcd/extui/dgus/origin/DGUSScreenHandler.h

@@ -38,6 +38,12 @@ class DGUSScreenHandler {
   // Send all 4 strings that are displayed on the infoscreen, confirmation screen and kill screen
   // The bools specifying whether the strings are in RAM or FLASH.
   static void sendinfoscreen(const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
+  static inline void sendinfoscreen(FSTR_P const line1, FSTR_P const line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash) {
+    sendinfoscreen(FTOP(line1), FTOP(line2), line3, line4, l1inflash, l2inflash, l3inflash, liinflash);
+  }
+  static inline void sendinfoscreen(FSTR_P const line1, FSTR_P const line2, FSTR_P const line3, FSTR_P const line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash) {
+    sendinfoscreen(FTOP(line1), FTOP(line2), FTOP(line3), FTOP(line4), l1inflash, l2inflash, l3inflash, liinflash);
+  }
 
   static void HandleUserConfirmationPopUp(uint16_t ConfirmVP, const char *line1, const char *line2, const char *line3, const char *line4, bool l1inflash, bool l2inflash, bool l3inflash, bool liinflash);
 

Marlin/src/lcd/extui/dgus_reloaded/DGUSScreenHandler.cpp

@@ -159,9 +159,9 @@ void DGUSScreenHandler::Loop() {
   dgus_display.Loop();
 }
 
-void DGUSScreenHandler::PrinterKilled(PGM_P error, PGM_P component) {
-  SetMessageLinePGM(error, 1);
-  SetMessageLinePGM(component, 2);
+void DGUSScreenHandler::PrinterKilled(FSTR_P const error, FSTR_P const component) {
+  SetMessageLinePGM(FTOP(error), 1);
+  SetMessageLinePGM(FTOP(component), 2);
   SetMessageLinePGM(NUL_STR, 3);
   SetMessageLinePGM(GET_TEXT(MSG_PLEASE_RESET), 4);
 

Marlin/src/lcd/extui/dgus_reloaded/DGUSScreenHandler.h

@@ -37,7 +37,7 @@ class DGUSScreenHandler {
   static void Ready();
   static void Loop();
 
-  static void PrinterKilled(PGM_P error, PGM_P component);
+  static void PrinterKilled(FSTR_P const error, FSTR_P const component);
   static void UserConfirmRequired(const char * const msg);
   static void SettingsReset();
   static void StoreSettings(char *buff);

Marlin/src/lcd/extui/dgus_reloaded/dgus_reloaded_extui.cpp

@@ -46,7 +46,7 @@ namespace ExtUI {
     }
   }
 
-  void onPrinterKilled(PGM_P error, PGM_P component) {
+  void onPrinterKilled(FSTR_P const error, FSTR_P const component) {
     dgus_screen_handler.PrinterKilled(error, component);
   }
 

Marlin/src/lcd/extui/example/example.cpp

@@ -46,7 +46,7 @@ namespace ExtUI {
      */
   }
   void onIdle() {}
-  void onPrinterKilled(PGM_P const error, PGM_P const component) {}
+  void onPrinterKilled(FSTR_P const error, FSTR_P const component) {}
   void onMediaInserted() {}
   void onMediaError() {}
   void onMediaRemoved() {}

Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_extui.cpp

@@ -38,9 +38,9 @@ namespace ExtUI {
 
   void onIdle() { EventLoop::loop(); }
 
-  void onPrinterKilled(PGM_P const error, PGM_P const component) {
-    char str[strlen_P(error) + strlen_P(component) + 3];
-    sprintf_P(str, PSTR(S_FMT ": " S_FMT), error, component);
+  void onPrinterKilled(FSTR_P const error, FSTR_P const component) {
+    char str[strlen_P(FTOP(error)) + strlen_P(FTOP(component)) + 3];
+    sprintf_P(str, PSTR(S_FMT ": " S_FMT), FTOP(error), FTOP(component));
     KillScreen::show(str);
   }