📝 Config section reorganization

Marlin/Configuration.h

@@ -1723,6 +1723,8 @@
   #define PROBING_BED_TEMP     50
 #endif
 
+// @section stepper drivers
+
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
@@ -1896,6 +1898,8 @@
 #endif
 
 /**
+ * @section filament runout sensors
+ *
  * Filament Runout Sensors
  * Mechanical or opto endstops are used to check for the presence of filament.
  *
@@ -2418,9 +2422,9 @@
 #define PREHEAT_2_TEMP_CHAMBER 35
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255
 
-// @section motion
-
 /**
+ * @section nozzle park
+ *
  * Nozzle Park
  *
  * Park the nozzle at the given XYZ position on idle or G27.
@@ -2443,6 +2447,8 @@
 #endif
 
 /**
+ * @section nozzle clean
+ *
  * Clean Nozzle Feature
  *
  * Adds the G12 command to perform a nozzle cleaning process.
@@ -2603,9 +2609,24 @@
   //#include "Configuration_Secure.h"       // External file with PASSWORD_DEFAULT_VALUE
 #endif
 
-//=============================================================================
-//============================= LCD and SD support ============================
-//=============================================================================
+// @section media
+
+/**
+ * SD CARD
+ *
+ * SD Card support is disabled by default. If your controller has an SD slot,
+ * you must uncomment the following option or it won't work.
+ */
+//#define SDSUPPORT
+
+/**
+ * SD CARD: ENABLE CRC
+ *
+ * Use CRC checks and retries on the SD communication.
+ */
+#if ENABLED(SDSUPPORT)
+  //#define SD_CHECK_AND_RETRY
+#endif
 
 // @section interface
 
@@ -2652,21 +2673,6 @@
  */
 #define LCD_INFO_SCREEN_STYLE 0
 
-/**
- * SD CARD
- *
- * SD Card support is disabled by default. If your controller has an SD slot,
- * you must uncomment the following option or it won't work.
- */
-//#define SDSUPPORT
-
-/**
- * SD CARD: ENABLE CRC
- *
- * Use CRC checks and retries on the SD communication.
- */
-//#define SD_CHECK_AND_RETRY
-
 /**
  * LCD Menu Items
  *