Skip to content

Commit

Permalink
✨ Tronxy v10 (#24787)
Browse files Browse the repository at this point in the history
  • Loading branch information
@ellensp
ellensp authored Oct 18, 2022
1 parent 4e1e82b commit 1aa0ece
Show file tree
Hide file tree
Showing 13 changed files with 1,970 additions and 1 deletion.
2 changes: 1 addition & 1 deletion Marlin/Configuration.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -3059,7 +3059,7 @@
//#define MKS_ROBIN_TFT_V1_1R

//
// 480x320, 3.5", FSMC Stock Display from TronxXY
// 480x320, 3.5", FSMC Stock Display from Tronxy
//
//#define TFT_TRONXY_X5SA

Expand Down
1 change: 1 addition & 0 deletions Marlin/src/core/boards.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -426,6 +426,7 @@
#define BOARD_OPULO_LUMEN_REV4 4241 // Opulo Lumen PnP Controller REV4 (STM32F407VE / STM32F407VG)
#define BOARD_FYSETC_SPIDER_KING407 4242 // FYSETC Spider King407 (STM32F407ZG)
#define BOARD_MKS_SKIPR_V1 4243 // MKS SKIPR v1.0 all-in-one board (STM32F407VE)
#define BOARD_TRONXY_V10 4244 // TRONXY V10 (STM32F446ZE)

//
// ARM Cortex M7
Expand Down
2 changes: 2 additions & 0 deletions Marlin/src/pins/pins.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -711,6 +711,8 @@
#include "stm32f4/pins_FYSETC_SPIDER_KING407.h" // STM32F4 env:FYSETC_SPIDER_KING407
#elif MB(MKS_SKIPR_V1)
#include "stm32f4/pins_MKS_SKIPR_V1_0.h" // STM32F4 env:mks_skipr_v1 env:mks_skipr_v1_nobootloader
#elif MB(TRONXY_V10)
#include "stm32f4/pins_TRONXY_V10.h" // STM32F4 env:STM32F446_tronxy

//
// ARM Cortex M7
Expand Down
4 changes: 4 additions & 0 deletions Marlin/src/pins/stm32f4/pins_TH3D_EZBOARD_V2.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -24,6 +24,10 @@
#define ALLOW_STM32DUINO
#include "env_validate.h"

#if HOTENDS > 1 || E_STEPPERS > 1
#error "TH3D EZBoard only supports 1 hotend / E stepper."
#endif

#define BOARD_INFO_NAME "TH3D EZBoard V2"
#define BOARD_WEBSITE_URL "th3dstudio.com"

Expand Down
266 changes: 266 additions & 0 deletions Marlin/src/pins/stm32f4/pins_TRONXY_V10.h
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,266 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2022 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#pragma once

#include "env_validate.h"

#if HOTENDS > 3 || E_STEPPERS > 3
#error "Tronxy V10 supports up to 3 hotends / E steppers."
#endif

#define BOARD_INFO_NAME "Tronxy V10"
#define DEFAULT_MACHINE_NAME BOARD_INFO_NAME

#define STEP_TIMER 6
#define TEMP_TIMER 14

//
// Servos
//
//#define SERVO0_PIN PB10

//
// EEPROM
//
#if NO_EEPROM_SELECTED
#undef NO_EEPROM_SELECTED
#if TRONXY_UI > 0
#define EEPROM_AT24CXX
#else
#define FLASH_EEPROM_EMULATION
#endif
#endif

#if ENABLED(FLASH_EEPROM_EMULATION)
// SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h)
#define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE)
#define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB)
#define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE
#else
#if ENABLED(EEPROM_AT24CXX)
#define AT24CXX_SCL PB8
#define AT24CXX_SDA PB9
#define AT24CXX_WP PB7
#else
#define I2C_EEPROM // AT24C32
#endif
#define MARLIN_EEPROM_SIZE 0x1000 // 4K
#endif

//
// SPI Flash
//
//#define SPI_FLASH
#if ENABLED(SPI_FLASH)
#define SPI_FLASH_SIZE 0x200000 // 2MB
#define W25QXX_CS_PIN PG15 // SPI2
#define W25QXX_MOSI_PIN PB5
#define W25QXX_MISO_PIN PB4
#define W25QXX_SCK_PIN PB3
#endif

//
// Limit Switches
//
#define X_MIN_PIN PC15
#define X_MAX_PIN PB0
#define Y_STOP_PIN PC14

#ifndef Z_MIN_PROBE_PIN
#define Z_MIN_PROBE_PIN PE3
#endif

#if ENABLED(DUAL_Z_ENDSTOP_PROBE)
#if NUM_Z_STEPPERS > 1 && Z_HOME_TO_MAX // Swap Z1/Z2 for dual Z with max homing
#define Z_MIN_PIN PF11
#define Z_MAX_PIN PC13
#else
#define Z_MIN_PIN PC13
#define Z_MAX_PIN PF11
#endif
#else
#ifndef Z_STOP_PIN
#define Z_STOP_PIN PC13
#endif
#endif
//
// Filament Sensors
//
#ifndef FIL_RUNOUT_PIN
#define FIL_RUNOUT_PIN PE6 // MT_DET
#endif
#ifndef FIL_RUNOUT2_PIN
#define FIL_RUNOUT2_PIN PF12
#endif

//
// Steppers
//
#define X_ENABLE_PIN PF0
#define X_STEP_PIN PE5
#define X_DIR_PIN PF1

#define Y_ENABLE_PIN PF5
#define Y_STEP_PIN PF9
#define Y_DIR_PIN PF3

#define Z_ENABLE_PIN PA5
#define Z_STEP_PIN PA6
#define Z_DIR_PIN PF15

#define E0_ENABLE_PIN PF14
#define E0_STEP_PIN PB1
#define E0_DIR_PIN PF13

#define E1_ENABLE_PIN PG5
#define E1_STEP_PIN PD12
#define E1_DIR_PIN PG4

#define E2_ENABLE_PIN PF7
#define E2_STEP_PIN PF6
#define E2_DIR_PIN PF4

//
// Temperature Sensors
//
#define TEMP_0_PIN PC3 // TH1
#define TEMP_BED_PIN PC2 // TB1

//
// Heaters / Fans
//
#define HEATER_0_PIN PG7 // HEATER1
#define HEATER_BED_PIN PE2 // HOT BED
//#define HEATER_BED_INVERTING true

#define FAN_PIN PG0 // FAN0
#define FAN1_PIN PB6 // FAN1
#define FAN2_PIN PG9 // FAN2
#define FAN3_PIN PF10 // FAN3
#define CONTROLLER_FAN_PIN PD7 // BOARD FAN
#define FAN_SOFT_PWM

//
// Laser / Spindle
//
#if HAS_CUTTER
#define SPINDLE_LASER_ENA_PIN PB11 // wifi:TX
#if ENABLED(SPINDLE_LASER_USE_PWM)
#define SPINDLE_LASER_PWM_PIN PB10 // wifi:RX-TIM2_CH3
// The PWM pin definition const PinMap PinMap_PWM[] in PeripheralPins.c must be compounded here
// See PWM_PIN(x) definition for details
#endif
#endif

//
// Misc
//
#define BEEPER_PIN PA8

//#define LED_PIN PG10
#define PS_ON_PIN PG10 // Temporarily switch the machine with LED simulation

#if ENABLED(TRONXY_BACKUP_POWER)
#define POWER_LOSS_PIN PF11 // Configure as drop-down input
#else
#define POWER_LOSS_PIN PE1 // Output of LM393 comparator, configured as pullup
#endif
//#define POWER_LM393_PIN PE0 // +V for the LM393 comparator, configured as output high

#if ENABLED(TFT_TRONXY_X5SA)
#error "TFT_TRONXY_X5SA is not yet supported."
#endif

#if 0

//
// TFT with FSMC interface
//
#if HAS_FSMC_TFT
#define TFT_RESET_PIN PB12
#define TFT_BACKLIGHT_PIN PG8

#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT
#define FSMC_DMA_DEV DMA2
#define FSMC_DMA_CHANNEL DMA_CH5

#define TFT_CS_PIN PG12
#define TFT_RS_PIN PG2

//#define TFT_WIDTH 480
//#define TFT_HEIGHT 320
//#define TFT_PIXEL_OFFSET_X 48
//#define TFT_PIXEL_OFFSET_Y 32
//#define TFT_DRIVER ILI9488
//#define TFT_BUFFER_SIZE 14400

#if NEED_TOUCH_PINS
#define TOUCH_CS_PIN PD11 // SPI1_NSS
#define TOUCH_SCK_PIN PB13 // SPI1_SCK
#define TOUCH_MISO_PIN PB14 // SPI1_MISO
#define TOUCH_MOSI_PIN PB15 // SPI1_MOSI
#endif

#if (LCD_CHIP_INDEX == 1 && (TRONXY_UI == 1 || TRONXY_UI == 2)) || LCD_CHIP_INDEX == 3
#define TOUCH_CALIBRATION_X -17181
#define TOUCH_CALIBRATION_Y 11434
#define TOUCH_OFFSET_X 501
#define TOUCH_OFFSET_Y -9
#elif LCD_CHIP_INDEX == 1 && TRONXY_UI == 4
#define TOUCH_CALIBRATION_X 11166
#define TOUCH_CALIBRATION_Y 17162
#define TOUCH_OFFSET_X -10
#define TOUCH_OFFSET_Y -16
#elif LCD_CHIP_INDEX == 4 && TRONXY_UI == 3
//#define TOUCH_CALIBRATION_X 8781
//#define TOUCH_CALIBRATION_Y 11773
//#define TOUCH_OFFSET_X -17
//#define TOUCH_OFFSET_Y -16
// Upside-down
#define TOUCH_CALIBRATION_X -8553
#define TOUCH_CALIBRATION_Y -11667
#define TOUCH_OFFSET_X 253
#define TOUCH_OFFSET_Y 331
#elif LCD_CHIP_INDEX == 2
#define TOUCH_CALIBRATION_X 17184
#define TOUCH_CALIBRATION_Y 10604
#define TOUCH_OFFSET_X -31
#define TOUCH_OFFSET_Y -29
#endif
#endif

#endif

//
// SD Card
//
#define SDIO_SUPPORT
#define SD_DETECT_PIN -1 // PF0, but not connected
#define SDIO_CLOCK 4500000
#define SDIO_READ_RETRIES 16

#define SDIO_D0_PIN PC8
#define SDIO_D1_PIN PC9
#define SDIO_D2_PIN PC10
#define SDIO_D3_PIN PC11
#define SDIO_CK_PIN PC12
#define SDIO_CMD_PIN PD2
35 changes: 35 additions & 0 deletions buildroot/share/PlatformIO/boards/marlin_STM32F446ZET_tronxy.json
View file
Original file line number Diff line number Diff line change
@@ -0,0 +1,35 @@
{
"build": {
"cpu": "cortex-m4",
"extra_flags": "-DSTM32F446xx",
"f_cpu": "180000000L",
"mcu": "stm32f446zet6",
"variant": "MARLIN_F446Zx_TRONXY"
},
"connectivity": [
"can"
],
"debug": {
"jlink_device": "STM32F446ZE",
"openocd_target": "stm32f4x",
"svd_path": "STM32F446x.svd"
},
"frameworks": [
"arduino",
"stm32cube"
],
"name": "STM32F446ZE (128k RAM. 512k Flash)",
"upload": {
"maximum_ram_size": 131072,
"maximum_size": 524288,
"protocol": "stlink",
"protocols": [
"jlink",
"stlink",
"blackmagic",
"serial"
]
},
"url": "https://www.st.com/en/microcontrollers-microprocessors/stm32f446.html",
"vendor": "Generic"
}
Loading

0 comments on commit 1aa0ece

Please sign in to comment.