Skip to content

Commit

Permalink
🎨 Remove f suffix from decimal number (#524)
Browse files Browse the repository at this point in the history
  • Loading branch information
@rhapsodyv
rhapsodyv authored Jun 22, 2021
1 parent 9da9fa4 commit a6ca303
Show file tree
Hide file tree
Showing 245 changed files with 254 additions and 254 deletions.
2 changes: 1 addition & 1 deletion config/default/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/3DFabXYZ/Migbot/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/ADIMLab/Gantry v1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/ADIMLab/Gantry v2/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AlephObjects/TAZ4/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Alfawise/U20-bltouch/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -2001,7 +2001,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Alfawise/U20/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1991,7 +1991,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AliExpress/UM2pExt/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/A2/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/A2plus/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/A6/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/A8/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/A8plus/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/A9/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/E10/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/E16/Stock/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET4+/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET4-Pro/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET4/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET4X/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET5-Pro/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET5/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Anet/ET5X/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AnyCubic/Chiron/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AnyCubic/i3 Mega/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/AnyCubic/i3/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/ArmEd/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1994,7 +1994,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Artillery/Genius/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Artillery/Sidewinder X1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Artillery/Sidewinder X1_0.9_degree_BMG_E3D_V6/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/Azteeg/X5GT/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/BIBO/TouchX/default/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1983,7 +1983,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/BIQU/B1-BLTouch/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/BIQU/B1/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
2 changes: 1 addition & 1 deletion config/examples/BQ/Hephestos/Configuration_adv.h
View file
Original file line number Diff line number Diff line change
Expand Up @@ -1990,7 +1990,7 @@

// Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster.
// Note: the Z=0.0f offset is determined by the probe offset which can be set using M851.
//#define PTC_PROBE_HEATING_OFFSET 0.5f
//#define PTC_PROBE_HEATING_OFFSET 0.5

// Height to raise the Z-probe between heating and taking the next measurement. Some probes
// may fail to untrigger if they have been triggered for a long time, which can be solved by
Expand Down
Loading

0 comments on commit a6ca303

Please sign in to comment.