🩹 Update Index arc settings

MarlinFirmware · Sep 5, 2021 · 9af88ec · 9af88ec
1 parent f8e2d40
commit 9af88ec
Showing 1 changed file with 7 additions and 7 deletions.
diff --git a/config/examples/Index/REV_03/Configuration_adv.h b/config/examples/Index/REV_03/Configuration_adv.h
@@ -2054,13 +2054,13 @@
 //
 #define ARC_SUPPORT                   // Requires ~3226 bytes
 #if ENABLED(ARC_SUPPORT)
-  #define MM_PER_ARC_SEGMENT      1 // (mm) Length (or minimum length) of each arc segment
-  //#define ARC_SEGMENTS_PER_R    1 // Max segment length, MM_PER = Min
-  #define MIN_ARC_SEGMENTS       24 // Minimum number of segments in a complete circle
-  //#define ARC_SEGMENTS_PER_SEC 50 // Use feedrate to choose segment length (with MM_PER_ARC_SEGMENT as the minimum)
-  #define N_ARC_CORRECTION       25 // Number of interpolated segments between corrections
-  //#define ARC_P_CIRCLES           // Enable the 'P' parameter to specify complete circles
-  //#define SF_ARC_FIX              // Enable only if using SkeinForge with "Arc Point" fillet procedure
+  #define MIN_ARC_SEGMENT_MM      0.1 // (mm) Minimum length of each arc segment
+  #define MAX_ARC_SEGMENT_MM      1.0 // (mm) Maximum length of each arc segment
+  #define MIN_CIRCLE_SEGMENTS    72   // Minimum number of segments in a complete circle
+  //#define ARC_SEGMENTS_PER_SEC 50   // Use the feedrate to choose the segment length
+  #define N_ARC_CORRECTION       25   // Number of interpolated segments between corrections
+  //#define ARC_P_CIRCLES             // Enable the 'P' parameter to specify complete circles
+  //#define SF_ARC_FIX                // Enable only if using SkeinForge with "Arc Point" fillet procedure
 #endif
 
 // G5 Bézier Curve Support with XYZE destination and IJPQ offsets