✨ WYH_L12864 display for Alfawise

MarlinFirmware/Marlin#22863
MarlinFirmware · Oct 3, 2021 · 95430d3 · 95430d3
1 parent 256a11c
commit 95430d3
Show file tree

Hide file tree

Showing 467 changed files with 1,611 additions and 181 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -2376,6 +2376,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -2408,6 +2408,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -2377,6 +2377,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration_adv.h b/config/examples/ADIMLab/Gantry v1/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration.h b/config/examples/ADIMLab/Gantry v2/Configuration.h
@@ -2377,6 +2377,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/ADIMLab/Gantry v2/Configuration_adv.h b/config/examples/ADIMLab/Gantry v2/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration.h b/config/examples/Alfawise/U20-bltouch/Configuration.h
@@ -2455,6 +2455,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -1612,7 +1612,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/Alfawise/U20/Configuration.h b/config/examples/Alfawise/U20/Configuration.h
@@ -2456,6 +2456,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/AliExpress/CL-260/Configuration.h b/config/examples/AliExpress/CL-260/Configuration.h
@@ -2376,6 +2376,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/AliExpress/UM2pExt/Configuration.h b/config/examples/AliExpress/UM2pExt/Configuration.h
@@ -2377,6 +2377,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/AliExpress/UM2pExt/Configuration_adv.h b/config/examples/AliExpress/UM2pExt/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/Anet/A2/Configuration.h b/config/examples/Anet/A2/Configuration.h
@@ -2378,6 +2378,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/Anet/A2/Configuration_adv.h b/config/examples/Anet/A2/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/Anet/A2plus/Configuration.h b/config/examples/Anet/A2plus/Configuration.h
@@ -2378,6 +2378,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/Anet/A2plus/Configuration_adv.h b/config/examples/Anet/A2plus/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/Anet/A6/Configuration.h b/config/examples/Anet/A6/Configuration.h
@@ -2470,6 +2470,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/Anet/A6/Configuration_adv.h b/config/examples/Anet/A6/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/Anet/A8/Configuration.h b/config/examples/Anet/A8/Configuration.h
@@ -2381,6 +2381,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/Anet/A8/Configuration_adv.h b/config/examples/Anet/A8/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/Anet/A8plus/Configuration.h b/config/examples/Anet/A8plus/Configuration.h
@@ -2378,6 +2378,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/Anet/A8plus/Configuration_adv.h b/config/examples/Anet/A8plus/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/Anet/A9/Configuration.h b/config/examples/Anet/A9/Configuration.h
@@ -2376,6 +2376,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/Anet/A9/Configuration_adv.h b/config/examples/Anet/A9/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/Anet/E10/Configuration.h b/config/examples/Anet/E10/Configuration.h
@@ -2376,6 +2376,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/Anet/E10/Configuration_adv.h b/config/examples/Anet/E10/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration.h
@@ -2378,6 +2378,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h b/config/examples/Anet/E16/BTT SKR 1.3/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/Anet/E16/Stock/Configuration.h b/config/examples/Anet/E16/Stock/Configuration.h
@@ -2378,6 +2378,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/Anet/E16/Stock/Configuration_adv.h b/config/examples/Anet/E16/Stock/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/Anet/ET4+/Configuration.h b/config/examples/Anet/ET4+/Configuration.h
@@ -2388,6 +2388,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/Anet/ET4+/Configuration_adv.h b/config/examples/Anet/ET4+/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5

diff --git a/config/examples/Anet/ET4-Pro/Configuration.h b/config/examples/Anet/ET4-Pro/Configuration.h
@@ -2388,6 +2388,11 @@
 //#define VIKI2
 //#define miniVIKI
 
+//
+// Alfawise Ex8 printer LCD marked as WYH L12864 COG
+//
+//#define WYH_L12864
+
 //
 // MakerLab Mini Panel with graphic
 // controller and SD support - https://reprap.org/wiki/Mini_panel

diff --git a/config/examples/Anet/ET4-Pro/Configuration_adv.h b/config/examples/Anet/ET4-Pro/Configuration_adv.h
@@ -1603,7 +1603,7 @@
    * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
    * This will prevent position updates from being displayed.
    */
-  #if ENABLED(U8GLIB_ST7920)
+  #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
     //#define DOGM_SPI_DELAY_US 5