🚸 Progress display followup

MarlinFirmware/Marlin#24879
MarlinFirmware · Feb 12, 2023 · 6063fd5 · 6063fd5
1 parent 0aedf13
commit 6063fd5
Show file tree

Hide file tree

Showing 71 changed files with 142 additions and 142 deletions.
diff --git a/config/examples/Alfawise/U20-bltouch/Configuration_adv.h b/config/examples/Alfawise/U20-bltouch/Configuration_adv.h
@@ -1502,8 +1502,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Alfawise/U20/Configuration_adv.h b/config/examples/Alfawise/U20/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/AnyCubic/Chiron/Configuration_adv.h b/config/examples/AnyCubic/Chiron/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero 2.0/Anycubic V1/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  #define SET_REMAINING_TIME              // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  #define SET_REMAINING_TIME              // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/Anycubic V1/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  #define SET_REMAINING_TIME              // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  #define SET_REMAINING_TIME              // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h b/config/examples/AnyCubic/Mega Zero/BigTreeTech SKR Mini MZ V1.0/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  #define SET_REMAINING_TIME              // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  #define SET_REMAINING_TIME              // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 1.4/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h b/config/examples/BIQU/B1 - SKR 2/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/BIQU/B1 SE Plus/Configuration_adv.h b/config/examples/BIQU/B1 SE Plus/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/BIQU/B1 SE/Configuration_adv.h b/config/examples/BIQU/B1 SE/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h b/config/examples/Creality/CR-10 Mini/MEEB-3DP/Configuration_adv.h
@@ -1492,8 +1492,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  #define SET_REMAINING_TIME              // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  #define SET_REMAINING_TIME              // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Creality/CR-10 V2/Configuration_adv.h b/config/examples/Creality/CR-10 V2/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Creality/CR-10 V3/Configuration_adv.h b/config/examples/Creality/CR-10 V3/Configuration_adv.h
@@ -1495,8 +1495,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/CR-10S/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.0/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 1.2/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 2.0/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h b/config/examples/Creality/Ender-3 Pro/BigTreeTech SKR Mini E3 3.0/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F1/Configuration_adv.h
@@ -1489,8 +1489,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h b/config/examples/Creality/Ender-3 S1/STM32F4/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech E3 RRF/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/...ig/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h b/...ig/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/2-into-1 Hotend/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h b/config/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Dual Z/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)

diff --git a/...ig/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h b/...ig/examples/Creality/Ender-3/BigTreeTech SKR E3 Turbo/Single Extruder/Configuration_adv.h
@@ -1493,8 +1493,8 @@
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
 #define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
-  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
-  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
+  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
+  //#define SET_REMAINING_TIME            // Add 'R' parameter to set remaining time
   //#define SET_INTERACTION_TIME          // Add 'C' parameter to set time until next filament change or other user interaction
   //#define M73_REPORT                    // Report M73 values to host
   #if BOTH(M73_REPORT, SDSUPPORT)