🔧 Improve config parity

MarlinFirmware · Jul 18, 2022 · 26771fd · 26771fd
1 parent c7c13e1
commit 26771fd
Show file tree

Hide file tree

Showing 619 changed files with 60,589 additions and 13,829 deletions.
diff --git a/config/default/Configuration.h b/config/default/Configuration.h
@@ -1127,9 +1127,9 @@
  *   M204 R    Retract Acceleration
  *   M204 T    Travel Acceleration
  */
-#define DEFAULT_ACCELERATION          3000    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_ACCELERATION          3000    // X, Y, Z ... and E acceleration for printing moves
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z ... acceleration for travel (non printing) moves
 
 /**
  * Default Jerk limits (mm/s)

diff --git a/config/default/Configuration_adv.h b/config/default/Configuration_adv.h
@@ -54,87 +54,87 @@
 // Custom Thermistor 1000 parameters
 //
 #if TEMP_SENSOR_0 == 1000
-  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND0_BETA                 3950    // Beta value
+  #define HOTEND0_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND0_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_1 == 1000
-  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND1_BETA                 3950    // Beta value
+  #define HOTEND1_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND1_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_2 == 1000
-  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND2_BETA                 3950    // Beta value
+  #define HOTEND2_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND2_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_3 == 1000
-  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND3_BETA                 3950    // Beta value
+  #define HOTEND3_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND3_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_4 == 1000
-  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND4_BETA                 3950    // Beta value
+  #define HOTEND4_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND4_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_5 == 1000
-  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND5_BETA                 3950    // Beta value
+  #define HOTEND5_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND5_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_6 == 1000
-  #define HOTEND6_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND6_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND6_BETA                 3950    // Beta value
+  #define HOTEND6_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND6_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND6_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_7 == 1000
-  #define HOTEND7_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND7_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND7_BETA                 3950    // Beta value
+  #define HOTEND7_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND7_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND7_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_BED == 1000
-  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
-  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
-  #define BED_BETA                     3950    // Beta value
+  #define BED_PULLUP_RESISTOR_OHMS        4700 // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS       100000 // Resistance at 25C
+  #define BED_BETA                        3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_CHAMBER == 1000
-  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define CHAMBER_BETA                 3950    // Beta value
+  #define CHAMBER_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define CHAMBER_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_COOLER == 1000
-  #define COOLER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define COOLER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define COOLER_BETA                 3950    // Beta value
+  #define COOLER_PULLUP_RESISTOR_OHMS     4700 // Pullup resistor
+  #define COOLER_RESISTANCE_25C_OHMS    100000 // Resistance at 25C
+  #define COOLER_BETA                     3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_PROBE == 1000
-  #define PROBE_PULLUP_RESISTOR_OHMS   4700    // Pullup resistor
-  #define PROBE_RESISTANCE_25C_OHMS    100000  // Resistance at 25C
-  #define PROBE_BETA                   3950    // Beta value
+  #define PROBE_PULLUP_RESISTOR_OHMS      4700 // Pullup resistor
+  #define PROBE_RESISTANCE_25C_OHMS     100000 // Resistance at 25C
+  #define PROBE_BETA                      3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_BOARD == 1000
-  #define BOARD_PULLUP_RESISTOR_OHMS   4700    // Pullup resistor
-  #define BOARD_RESISTANCE_25C_OHMS    100000  // Resistance at 25C
-  #define BOARD_BETA                   3950    // Beta value
+  #define BOARD_PULLUP_RESISTOR_OHMS      4700 // Pullup resistor
+  #define BOARD_RESISTANCE_25C_OHMS     100000 // Resistance at 25C
+  #define BOARD_BETA                      3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_REDUNDANT == 1000
-  #define REDUNDANT_PULLUP_RESISTOR_OHMS   4700    // Pullup resistor
-  #define REDUNDANT_RESISTANCE_25C_OHMS    100000  // Resistance at 25C
-  #define REDUNDANT_BETA                   3950    // Beta value
+  #define REDUNDANT_PULLUP_RESISTOR_OHMS  4700 // Pullup resistor
+  #define REDUNDANT_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
+  #define REDUNDANT_BETA                  3950 // Beta value
 #endif
 
 /**
@@ -2423,7 +2423,7 @@
 
   /**
    * Extra G-code to run while executing tool-change commands. Can be used to use an additional
-   * stepper motor (e.g., I axis in Configuration.h) to drive the tool-changer.
+   * stepper motor (I axis, see option LINEAR_AXES in Configuration.h) to drive the tool-changer.
    */
   //#define EVENT_GCODE_TOOLCHANGE_T0 "G28 A\nG1 A0" // Extra G-code to run while executing tool-change command T0
   //#define EVENT_GCODE_TOOLCHANGE_T1 "G1 A10"       // Extra G-code to run while executing tool-change command T1

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration.h b/config/examples/3DFabXYZ/Migbot/Configuration.h
@@ -957,7 +957,6 @@
 // ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
 //#define FOAMCUTTER_XYUV
 
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@@ -1150,9 +1149,9 @@
  *   M204 R    Retract Acceleration
  *   M204 T    Travel Acceleration
  */
-#define DEFAULT_ACCELERATION          1590    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_ACCELERATION          1590    // X, Y, Z ... and E acceleration for printing moves
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   1590    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_TRAVEL_ACCELERATION   1590    // X, Y, Z ... acceleration for travel (non printing) moves
 
 /**
  * Default Jerk limits (mm/s)

diff --git a/config/examples/3DFabXYZ/Migbot/Configuration_adv.h b/config/examples/3DFabXYZ/Migbot/Configuration_adv.h
@@ -54,87 +54,87 @@
 // Custom Thermistor 1000 parameters
 //
 #if TEMP_SENSOR_0 == 1000
-  #define HOTEND0_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND0_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND0_BETA                 3950    // Beta value
+  #define HOTEND0_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND0_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND0_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_1 == 1000
-  #define HOTEND1_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND1_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND1_BETA                 3950    // Beta value
+  #define HOTEND1_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND1_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND1_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_2 == 1000
-  #define HOTEND2_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND2_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND2_BETA                 3950    // Beta value
+  #define HOTEND2_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND2_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND2_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_3 == 1000
-  #define HOTEND3_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND3_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND3_BETA                 3950    // Beta value
+  #define HOTEND3_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND3_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND3_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_4 == 1000
-  #define HOTEND4_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND4_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND4_BETA                 3950    // Beta value
+  #define HOTEND4_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND4_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND4_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_5 == 1000
-  #define HOTEND5_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND5_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND5_BETA                 3950    // Beta value
+  #define HOTEND5_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND5_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND5_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_6 == 1000
-  #define HOTEND6_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND6_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND6_BETA                 3950    // Beta value
+  #define HOTEND6_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND6_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND6_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_7 == 1000
-  #define HOTEND7_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define HOTEND7_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define HOTEND7_BETA                 3950    // Beta value
+  #define HOTEND7_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define HOTEND7_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define HOTEND7_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_BED == 1000
-  #define BED_PULLUP_RESISTOR_OHMS     4700    // Pullup resistor
-  #define BED_RESISTANCE_25C_OHMS      100000  // Resistance at 25C
-  #define BED_BETA                     3950    // Beta value
+  #define BED_PULLUP_RESISTOR_OHMS        4700 // Pullup resistor
+  #define BED_RESISTANCE_25C_OHMS       100000 // Resistance at 25C
+  #define BED_BETA                        3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_CHAMBER == 1000
-  #define CHAMBER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define CHAMBER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define CHAMBER_BETA                 3950    // Beta value
+  #define CHAMBER_PULLUP_RESISTOR_OHMS    4700 // Pullup resistor
+  #define CHAMBER_RESISTANCE_25C_OHMS   100000 // Resistance at 25C
+  #define CHAMBER_BETA                    3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_COOLER == 1000
-  #define COOLER_PULLUP_RESISTOR_OHMS 4700    // Pullup resistor
-  #define COOLER_RESISTANCE_25C_OHMS  100000  // Resistance at 25C
-  #define COOLER_BETA                 3950    // Beta value
+  #define COOLER_PULLUP_RESISTOR_OHMS     4700 // Pullup resistor
+  #define COOLER_RESISTANCE_25C_OHMS    100000 // Resistance at 25C
+  #define COOLER_BETA                     3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_PROBE == 1000
-  #define PROBE_PULLUP_RESISTOR_OHMS   4700    // Pullup resistor
-  #define PROBE_RESISTANCE_25C_OHMS    100000  // Resistance at 25C
-  #define PROBE_BETA                   3950    // Beta value
+  #define PROBE_PULLUP_RESISTOR_OHMS      4700 // Pullup resistor
+  #define PROBE_RESISTANCE_25C_OHMS     100000 // Resistance at 25C
+  #define PROBE_BETA                      3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_BOARD == 1000
-  #define BOARD_PULLUP_RESISTOR_OHMS   4700    // Pullup resistor
-  #define BOARD_RESISTANCE_25C_OHMS    100000  // Resistance at 25C
-  #define BOARD_BETA                   3950    // Beta value
+  #define BOARD_PULLUP_RESISTOR_OHMS      4700 // Pullup resistor
+  #define BOARD_RESISTANCE_25C_OHMS     100000 // Resistance at 25C
+  #define BOARD_BETA                      3950 // Beta value
 #endif
 
 #if TEMP_SENSOR_REDUNDANT == 1000
-  #define REDUNDANT_PULLUP_RESISTOR_OHMS   4700    // Pullup resistor
-  #define REDUNDANT_RESISTANCE_25C_OHMS    100000  // Resistance at 25C
-  #define REDUNDANT_BETA                   3950    // Beta value
+  #define REDUNDANT_PULLUP_RESISTOR_OHMS  4700 // Pullup resistor
+  #define REDUNDANT_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
+  #define REDUNDANT_BETA                  3950 // Beta value
 #endif
 
 /**

diff --git a/config/examples/ADIMLab/Gantry v1/Configuration.h b/config/examples/ADIMLab/Gantry v1/Configuration.h
@@ -955,7 +955,6 @@
 // ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
 //#define FOAMCUTTER_XYUV
 
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@@ -1148,9 +1147,9 @@
  *   M204 R    Retract Acceleration
  *   M204 T    Travel Acceleration
  */
-#define DEFAULT_ACCELERATION          1000    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_ACCELERATION          1000    // X, Y, Z ... and E acceleration for printing moves
 #define DEFAULT_RETRACT_ACCELERATION  1000    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z ... acceleration for travel (non printing) moves
 
 /**
  * Default Jerk limits (mm/s)