Trento

An open cloud-native web console improving on the life of SAP Applications administrators.

Trento is a city on the Adige River in Trentino-Alto Adige/Südtirol in Italy. [...] It is one of the nation's wealthiest and most prosperous cities, [...] often ranking highly among Italian cities for quality of life, standard of living, and business and job opportunities. (source)

This project is a reboot of the "SUSE Console for SAP Applications", also known as the Blue Horizon for SAP prototype, which is focused on automated infrastructure deployment and provisioning for SAP Applications.

As opposed to that first iteration, this new one will focus more on operations of existing clusters, rather than deploying new one.

Features

Automated discovery of SAP HANA HA clusters;
SAP Systems and Instances overview;
Configuration validation for Pacemaker, Corosync, SBD, SAPHanaSR and other generic SUSE Linux Enterprise for SAP Application OS settings (a.k.a. the HA Config Checks);
Specific configuration audits for SAP HANA Scale-Up Performance-Optimized scenarios deployed on MS Azure cloud.

Introduction

Trento is a comprehensive monitoring solution made by two main components, the Trento Server and the Trento Agent.

The Trento Server is an independent, cloud-native, distributed system and should run on dedicated infrastructure resources. It is in turn composed by the following sub-systems:

The trento web application;
The trento runner worker;

The Trento Agent is a single background process (trento agent) running in each host of the target infrastructure the user desires to monitor.

Please note that, except for the third-party ones like Ansible, all the components are embedded within one single trento binary.

See the architecture document for additional details.

Being the project in development, all of the above might be subject to change!

Installation

Requirements

The Trento Server is intended to run in many ways, depending on users' already existing infrastructure, but it's designed to be cloud-native and OS agnostic. As such, our default installation method provisions a minimal, single node, K3S Kubernetes cluster to run its various components in Linux containers.
The suggested physical resources for running all the Trento Server components are 2GB of RAM and 2 CPU cores. The Trento Server needs to reach the target infrastructure.

The Trento Agent component, on the other hand, needs to interact with a number of low-level system components which are part of the SUSE Linux Enterprise Server for SAP Applications Linux distribution. These could in theory also be installed and configured on other distributions providing the same functionalities, but this use case is not within the scope of the active development. The resource footprint of the Trento Agent should not impact the performance of the host it runs on.

Quick-Start installation

Installation scripts are provided to automatically install and update the latest version of Trento. Please follow the instructions in the given order.

Trento Server installation

The script installs a single node K3s cluster and uses the trento-server Helm chart to bootstrap a complete Trento server component.

You can curl | bash if you want to live on the edge.

curl -sfL https://raw.githubusercontent.com/trento-project/trento/main/install-server.sh | bash

Or you can fetch the script, and then execute it manually.

curl -O https://raw.githubusercontent.com/trento-project/trento/main/install-server.sh
chmod 700 install-server.sh
sudo ./install-server.sh

The script will ask you for a private key that is used by the runner service to perform checks in the agent hosts via ssh.

Note: if a Trento server is already installed in the host, it will be updated.

Please refer to the Trento Runner section for more information. Please refer to the Helm chart section for more information about the Helm chart.

Trento Agent installation

After the server installation, you might want to install Trento agents in a running cluster. Please add the public key to the ssh authorized_keys to enable the runner checks in the agent host, as mentioned in the server installation above.

As for the server component an installation script is provided, you can curl | bash it if you want to live on the edge.

curl -sfL https://raw.githubusercontent.com/trento-project/trento/main/install-agent.sh | sudo bash

Or you can fetch the script, and then execute it manually.

curl -O https://raw.githubusercontent.com/trento-project/trento/main/install-agent.sh
chmod 700 install-agent.sh
sudo ./install-agent.sh

The script will ask you for two IP addresses.

ssh address: the address to which the trento-agent should be reachable for ssh connection by the runner for check execution.
trento server IP: the address where Trento server can be reached.

You can pass these arguments as flags or env variables too:

curl -sfL https://raw.githubusercontent.com/trento-project/trento/main/install-agent.sh | sudo bash -s - --ssh-address=192.168.33.10 --server-ip=192.168.33.1

SSH_ADDRESS=192.168.33.10 SERVER_IP=192.168.33.1 sudo ./install-agent.sh

Starting Trento Agent service

The installation script does not start the agent automatically.

You can enable boot startup and launch it with systemd:

sudo systemctl enable --now trento-agent

Please, make sure the server is running before starting the agent.

That's it! You can now reach the Trento web UI and start using it.

Manual installation

Pre-built binaries

Pre-built statically linked binaries are made available via GitHub releases.

Compile from source

You clone also clone and build it manually:

git clone https://github.com/trento-project/trento.git
cd trento
make build

See the section below to know more about the build dependencies.

Docker images

T.B.D.

RPM Packages

T.B.D.

Helm chart

The packaging/helm directory contains the Helm chart for installing Trento Server in a Kubernetes cluster.

Install K3S

If installing as root:

# curl -sfL https://get.k3s.io | sh

If installing as non-root user:

curl -sfL https://get.k3s.io | sh -s - --write-kubeconfig-mode 644

Export KUBECONFIG env variable:

export KUBECONFIG=/etc/rancher/k3s/k3s.yaml

Please refer to the K3S official documentation for more information about the installation.

Install Helm and chart dependencies

Install Helm:

curl https://raw.githubusercontent.com/helm/helm/master/scripts/get-helm-3 | bash

Please refer to the Helm official documentation for more information about the installation.

Install the Trento Server Helm chart

Add third-party Helm repositories:

helm repo add bitnami https://charts.bitnami.com/bitnami
helm repo update

Install chart dependencies:

cd packaging/helm/trento-server/
helm dependency update

The Runner component of Trento server needs ssh access to the agent nodes to perform the checks. You need to pass a valid private key used for ssh authentication to the Helm chart, and it will be stored in the K3s cluster as a secret. Please refer to the Trento Runner section for more information.

Install the Trento Server chart:

helm install trento . --set-file trento-runner.privateKey=/your/path/id_rsa_runner

or perform a rolling update:

helm upgrade trento . --set-file trento-runner.privateKey=/your/path/id_rsa_runner

Now you can connect to the web server via http://localhost and point the agents to the cluster IP address.

Other Helm chart usage examples:

Use a different container image (e.g. the rolling one):

helm install trento . --set trento-web.image.tag="rolling" --set trento-runner.image.tag="rolling" --set-file trento-runner.privateKey=id_rsa_runner

Use a different container registry:

helm install trento . --set trento-web.image.repository="ghcr.io/myrepo/trento-web" --set trento-runner.image.repository="ghcr.io/myrepo/trento-runner" --set-file trento-runner.privateKey=id_rsa_runner

Please refer to the the subcharts values.yaml for an advanced usage.

Manually running Trento

What follows are explicit instructions on how to run all the various components without any automated orchestration.

Trento Agents

Trento Agents are responsible for discovering SAP systems, HA clusters and some additional data. These Agents need to run in the same systems hosting the HA Cluster services, so running them in isolated environments (e.g. serverless, containers, etc.) makes little sense, as they won't be able as the discovery mechanisms will not be able to report any host information.

To start the trento agent:

./trento agent start

If the discovery loop is being executed too frequently, and this impacts the Web interface performance, the agent has the option to configure the discovery loop mechanism using the --discovery-period flag. Increasing this value improves the overall performance of the application

Publishing discovery data

Trento Agents publish discovery data to a Collector on Trento Server.

The communication can be made secure by enabling mTLS with --enable-mtls

See this tutorial for extra information about SSL Certificates.

Server

$> ./trento web serve [...] --enable-mtls --cert /path/to/certs/server-cert.pem --key /path/to/certs/server-key.pem --ca /path/to/certs/ca-cert.pem

Agent

$> ./trento agent start [...] --enable-mtls --cert /path/to/certs/client-cert.pem --key /path/to/certs/client-key.pem --ca /path/to/certs/ca-cert.pem

Development Note: ./test/certs/ folder contains some dummy Server, Client and CA Certificates and Keys. Those are useful in order to test mTLS communication between the Agent and the DataCollector.

Trento Runner

The Trento Runner is a worker process responsible for driving automated configuration audits. It is based on Ansible. This component can be executed in the same host as the Web UI, but it is not mandatory: it can be executed in any other host with network access to the Trento Agents.

Find more information about how to create more Trento health checks here.

In order to start them, some packages must be installed and started. Here a quick go through:

Starting the Trento Runner

The Runner needs the ansible Python package available locally:

pip install 'ansible~=4.6.0'

The installed ansible components versions should be at least ansible~=4.6.0 and ansible-core~=2.11.5

Once dependencies are in place, you can start the Runner itself:

./trento runner start --api-host $WEB_IP --api-port $WEB_PORT -i 5

Note: The Trento Runner component must have SSH access to all the agents via a password-less SSH key pair.

Trento Web UI

At this point, we can start the web application as follows:

./trento web serve

Please consult the help CLI command for more insights on the various options.

Configuration

Trento can be run with a config file in replacement of command-line arguments.

Locations

Configuration, if not otherwise specified by the --config=/path/to/config.yaml option, would be searched in following locations:

Note that order represents priority

/etc/trento/ <-- first location looked
/usr/etc/trento/ <-- fallback here if config not found in previous location
~/.config/trento/ aka user's home <-- fallback here

Formats

yaml is the only supported format at the moment.

Naming conventions

Each component of trento supports its own configuration, so the expected config files in the chosen location must be called after the component it is supporting.

So supported names are (agent|web|runner).yaml

Example locations:

/etc/trento/agent.yaml

/etc/trento/web.yaml

/etc/trento/runner.yaml

or

/usr/etc/trento/agent.yaml

/usr/etc/trento/web.yaml

/usr/etc/trento/runner.yaml

Note: runner still not supported for now

Examples

# /etc/trento/agent.yaml

enable-mtls: true
cert: /path/to/certs/client-cert.pem
key: /path/to/certs/client-key.pem
ca: /path/to/certs/ca-cert.pem
collector-host: localhost
collector-port: 8443

# /etc/trento/web.yaml

db-port: 5432

collector-port: 8443
enable-mtls: true
cert: /path/to/certs/server-cert.pem
key: /path/to/certs/server-key.pem
ca: /path/to/certs/ca-cert.pem

Environment Variables

All of the options supported by the command line and configuration file can be provided as environment variables as well.

The rule is: get the option name eg. enable-mtls, replace dashes - with underscores _, make it uppercase and add a TRENTO_ prefix.

Examples:

enable-mtls -> TRENTO_ENABLE_MTLS=true ./trento agent start

collector-host -> TRENTO_COLLECTOR_HOST=localhost ./trento web serve

cert -> TRENTO_CERT=/path/to/certs/server-cert.pem ./trento web serve

Development

Helm development chart

A development Helm chart is available at ./hack/helm/trento-dev. The chart is based on the official Helm chart package and overrides certain values to provide a development environment.

# Update dependencies in the official Helm chart
cd ./packaging/helm/trento-server
helm dep update

# Install the development Helm chart
cd ./hack/helm/trento-dev
helm dep update
helm install trento-dev .

Since integration tests require a running PostgreSQL instance, please make sure the chart is installed prior to running the integration tests. The PostgreSQL instance will be accessible at port localhost:5432.

If you want to skip database integration tests, you can use a dedicated environment variable as follows:

TRENTO_DB_INTEGRATION_TESTS=false make test

Build system

We use GNU Make as a task manager; here are some common targets:

make # clean, test and build everything

make clean # removes any build artifact
make test # executes all the tests
make fmt # fixes code formatting
make web-assets # invokes the frontend build scripts
make generate # refresh automatically generated code (e.g. static Go mocks)

Feel free to peek at the Makefile to know more.

Development dependencies

Additionally, for the development we use mockery for the generate target, which in turn is required for the test target. You can install it with go install github.com/vektra/mockery/v2.

Be sure to add the mockery binary to your $PATH environment variable so that make can find it. That usually comes with configuring $GOPATH, $GOBIN, and adding the latter to your $PATH.

Docker

The Dockerfile will automatically fetch all the required compile-time dependencies to build the binary and finally a container image with the fresh binary in it.

We use a multi-stage build with two main targets: trento-runner and trento-web. The latter is the default.

You can build the component like follows:

docker build --target trento-runner -t trento-runner .
docker build -t trento-web . # same as specifying --target trento-web

Please note that the trento agent component requires to be running on the OS (not inside a container) so, while it is technically possible to run trento agent commands in the container, it makes little sense because most of its internals require direct access to the host of the HA Cluster components.

End-to-end testing

End-to-end testing inside Trento is achieved through Cypress, a browser testing tool that can instrument both Chromium/Puppeteer and Firefox. It can be used also as an integration test framework since assertions can be run on JSON payloads too.

Setting the environment up to write or run end-to-end tests is quite simple. Just change directory to test/e2e, install the dependencies and open Cypress:

cd ./test/e2e/

npm install

npx cypress run # run it command line
npx cypress open # open the GUI tool to launch tests

Adjusting environment variables to suit your own needs

Sometimes it can be useful to change some environment variable just to adjust some behavior to your own needs. Also, this will become handy if you need any new environment variable around.

There are two ways to do that. The first is to edit the cypress.json file and modify the env field:

{
  "baseUrl": "http://localhost:8080",
  "viewportWidth": 1366,
  "viewportHeight": 768,
  "env": {
    "collector_host": "localhost",
    "collector_port": 8081,
    "heartbeat_interval": 5000,
    "db_host": "localhost",
    "db_port": 5432,
    "fixtures_path": "./cypress/fixtures",
    "trento_binary": "../../trento",
    "photofinish_binary": "photofinish"
  }
}

The second way to provide Cypress an environment variable is to state it as a proper environment variable, prepending cypress_ to that:

cypress_foo=bar npx cypress run

Further questions about E2E testing?

If you have any doubts, the team is here to help! Just make sure you also covered the official Cypress documentation first. 😄

Dump a scenario from a running cluster

A script to dump a scenario from a running cluster is available at ./hack/dump-scenario.sh.

Running this script in the k3s node where trento-server was installed will dump the current state of Trento to a local folder.

Please refer to the script usage help for more details:

./hack/dump-scenario.sh --help

SAPControl web service

The SAPControl web service soap client was generated by hooklift/gowsdl, then the methods and structs needed were cherry-picked and adapted. For reference, you can find the full, generated, web service code here.

Support

Please only report bugs via GitHub issues; for any other inquiry or topic use GitHub discussion.

Contributing

See CONTRIBUTING.md

License

Licensed under the Apache License, Version 2.0 (the "License"); you may not use this file except in compliance with the License. You may obtain a copy of the License at

https://www.apache.org/licenses/LICENSE-2.0

Unless required by applicable law or agreed to in writing, software distributed under the License is distributed on an "AS IS" BASIS, WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. See the License for the specific language governing permissions and limitations under the License.

Name		Name	Last commit message	Last commit date
Latest commit History 2,048 Commits
.github		.github
agent		agent
api		api
cmd		cmd
docs		docs
hack		hack
internal		internal
packaging		packaging
runner		runner
test		test
tools		tools
version		version
web		web
.dockerignore		.dockerignore
.editorconfig		.editorconfig
.github_changelog_generator		.github_changelog_generator
.gitignore		.gitignore
CHANGELOG.md		CHANGELOG.md
CONTRIBUTING.md		CONTRIBUTING.md
Dockerfile		Dockerfile
LICENSE		LICENSE
Makefile		Makefile
README.md		README.md
ct.yaml		ct.yaml
go.mod		go.mod
go.sum		go.sum
helmlintconf.yaml		helmlintconf.yaml
install-agent.sh		install-agent.sh
install-server.sh		install-server.sh
main.go		main.go
requirements.dev.txt		requirements.dev.txt

License

MMuschner/trento

Folders and files

Latest commit

History

Repository files navigation

Trento

Table of contents

Features

Introduction

Installation

Requirements

Quick-Start installation

Trento Server installation

Trento Agent installation

Starting Trento Agent service

Manual installation

Pre-built binaries

Compile from source

Docker images

RPM Packages

Helm chart

Install K3S

Install Helm and chart dependencies

Install the Trento Server Helm chart

Other Helm chart usage examples:

Manually running Trento

Trento Agents

Publishing discovery data

Server

Agent

Trento Runner

Starting the Trento Runner

Trento Web UI

Configuration

Locations

Formats

Naming conventions

Examples

Environment Variables

Development

Helm development chart

Build system

Development dependencies

Docker

End-to-end testing

Adjusting environment variables to suit your own needs

Further questions about E2E testing?

Dump a scenario from a running cluster

SAPControl web service

Support

Contributing

License

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages