Update scipy requirement from <=1.13.1,>=1.2.0 to <=1.14.0,>=1.14.0 #1106
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
![dependabot[bot]](https://avatars.githubusercontent.com/in/29110?s=60&v=4){kind=small}
Updates the requirements on [scipy](https://github.com/scipy/scipy) to permit the latest version. - [Release notes](https://github.com/scipy/scipy/releases) - [Commits](scipy/scipy@v1.2.0...v1.14.0) --- updated-dependencies: - dependency-name: scipy dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]>
dependabot
bot
added
ignore-for-release
maintenance
|
scipy 1.14 requires python version 3.10+. that was released in October 2021. scikit-learn vs 15.1 #1108 requires python version 3.9+ that was released in October 2020. Our current minimum, 3.8, was released in October 2019. We don't need to keep 3.8 forever, but I don't want to force every to upgrade just to use tedana. Is flexible versioning possible (i.e. scipy >=1.14 only if python>=3.10)? Otherwise, this might be something to discuss at a dev call. |
|
I don't think Python version-specific requirements are possible. The pip dependency resolver should find the newest useable version of each dependency that is allowed for the Python version that is installed, as long as we don't require a version later than that. So it should be fine as long as we explicitly set the minimum scipy version to be something that works with Python 3.8. |
handwerkerd
reviewed
Jul 9, 2024
eurunuela
previously approved these changes
Jul 9, 2024
handwerkerd
previously approved these changes
Jul 9, 2024
eurunuela
approved these changes
Jul 10, 2024
handwerkerd
approved these changes
Jul 10, 2024
dependabot
bot
deleted the
dependabot/pip/scipy-lte-1.14.0-and-gte-1.14.0
branch
BahmanTahayori
pushed a commit
to BahmanTahayori/tedana_florey
that referenced
this pull request
Aug 30, 2024
* Limit current adaptive mask method to brain mask (ME-ICA#1060) * Limit adaptive mask calculation to brain mask. Limit adaptive mask calculation to brain mask. Expand on logic of first adaptive mask method. Update tedana/utils.py Improve docstring. Update test. Add decreasing-signal-based adaptive mask. Keep removing. Co-Authored-By: Dan Handwerker <[email protected]> * Use `compute_epi_mask` in t2smap workflow. * Try fixing the tests. * Fix make_adaptive_mask. * Update test_utils.py * Update test_utils.py * Improve docstring. * Update utils.py * Update test_utils.py * Revert "Update test_utils.py" This reverts commit 259b002. * Don't take absolute value of echo means. * Log echo-wise thresholds in adaptive mask. * Add comment about non-zero voxels. * Update utils.py * Update test_utils.py * Update test_utils.py * Update test_utils.py * Log the thresholds again. * Address review. * Fix test. --------- Co-authored-by: Dan Handwerker <[email protected]> * Update nilearn requirement from <=0.10.3,>=0.7 to >=0.7,<=0.10.4 (ME-ICA#1077) * Add adaptive mask plot to report (ME-ICA#1073) * Update scikit-learn requirement (ME-ICA#1075) Updates the requirements on [scikit-learn](https://github.com/scikit-learn/scikit-learn) to permit the latest version. - [Release notes](https://github.com/scikit-learn/scikit-learn/releases) - [Commits](scikit-learn/scikit-learn@0.21.0...1.4.2) --- updated-dependencies: - dependency-name: scikit-learn dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update pandas requirement from <=2.2.1,>=2.0 to >=2.0,<=2.2.2 (ME-ICA#1076) Updates the requirements on [pandas](https://github.com/pandas-dev/pandas) to permit the latest version. - [Release notes](https://github.com/pandas-dev/pandas/releases) - [Commits](pandas-dev/pandas@v2.0.0...v2.2.2) --- updated-dependencies: - dependency-name: pandas dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update bokeh requirement from <=3.4.0,>=1.0.0 to >=1.0.0,<=3.4.1 (ME-ICA#1078) Updates the requirements on [bokeh](https://github.com/bokeh/bokeh) to permit the latest version. - [Changelog](https://github.com/bokeh/bokeh/blob/branch-3.5/docs/CHANGELOG) - [Commits](bokeh/bokeh@1.0.0...3.4.1) --- updated-dependencies: - dependency-name: bokeh dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Load user-defined mask as expected by plot_adaptive_mask (ME-ICA#1079) * DOC desc-optcomDenoised -> desc-denoised (ME-ICA#1080) * docs: add mvdoc as a contributor for code, bug, and doc (ME-ICA#1082) * docs: update README.md * docs: update .all-contributorsrc --------- Co-authored-by: allcontributors[bot] <46447321+allcontributors[bot]@users.noreply.github.com> * Identify the last good echo in adaptive mask instead of sum of good echoes (ME-ICA#1061) * Limit adaptive mask calculation to brain mask. Limit adaptive mask calculation to brain mask. Expand on logic of first adaptive mask method. Update tedana/utils.py Improve docstring. Update test. Add decreasing-signal-based adaptive mask. Keep removing. Co-Authored-By: Dan Handwerker <[email protected]> * Use `compute_epi_mask` in t2smap workflow. * Try fixing the tests. * Fix make_adaptive_mask. * Update test_utils.py * Update test_utils.py * Improve docstring. * Identify the last good echo instead of sum. Improve docstring. Update test_utils.py Update test_utils.py Fix make_adaptive_mask. Try fixing the tests. Use `compute_epi_mask` in t2smap workflow. Limit adaptive mask calculation to brain mask. Limit adaptive mask calculation to brain mask. Expand on logic of first adaptive mask method. Update tedana/utils.py Improve docstring. Update test. Add decreasing-signal-based adaptive mask. Keep removing. Co-Authored-By: Dan Handwerker <[email protected]> * Fix. * Update utils.py * Update utils.py * Try fixing. * Update utils.py * Update utils.py * add checks * Just loop over voxels. * Update utils.py * Update utils.py * Update test_utils.py * Revert "Update test_utils.py" This reverts commit 259b002. * Update test_utils.py * Update test_utils.py * Remove checks. * Don't take absolute value of echo means. * Log echo-wise thresholds in adaptive mask. * Add comment about non-zero voxels. * Update utils.py * Update utils.py * Update test_utils.py * Update test_utils.py * Update test_utils.py * Log the thresholds again. * Update test_utils.py * Update test_utils.py * Update test_utils.py * Add simulated data to adaptive mask test. * Clean up the tests. * Add value that tests the base mask. * Remove print in test. * Update tedana/utils.py Co-authored-by: Dan Handwerker <[email protected]> * Update tedana/utils.py Co-authored-by: Dan Handwerker <[email protected]> --------- Co-authored-by: Dan Handwerker <[email protected]> * Output RMSE map and time series for decay model fit (ME-ICA#1044) * Draft function to calculate decay model fit. * Calculate root mean squared error instead. * Incorporate metrics. * Output RMSE results. * Output results in tedana. * Hopefully fix things. * Update decay.py * Try improving performance. * Update decay.py * Fix again. * Use tqdm. * Update decay.py * Update decay.py * Update decay.py * Update expected outputs. * Add figures. * Update outputs. * Include global signal in confounds file. * Update fiu_four_echo_outputs.txt * Rename function. * Rename function. * Update tedana.py * Update tedana/decay.py Co-authored-by: Dan Handwerker <[email protected]> * Update decay.py * Update decay.py * Whoops. * Apply suggestions from code review Co-authored-by: Dan Handwerker <[email protected]> * Fix things maybe. * Fix things. * Update decay.py * Remove any files that are built through appending. * Update outputs. * Add section on plots to docs. * Fix the description. * Update docs/outputs.rst Co-authored-by: Dan Handwerker <[email protected]> * Update docs/outputs.rst * Fix docstring. --------- Co-authored-by: Dan Handwerker <[email protected]> * minimum nilearn 0.10.3 (ME-ICA#1094) * Use nearest-neighbors interpolation in `plot_component` (ME-ICA#1098) * Use nearest-neighbors interpolation in plot_stat_map. * Only use NN interp for component maps. * Update scipy requirement from <=1.13.0,>=1.2.0 to >=1.2.0,<=1.13.1 (ME-ICA#1100) Updates the requirements on [scipy](https://github.com/scipy/scipy) to permit the latest version. - [Release notes](https://github.com/scipy/scipy/releases) - [Commits](scipy/scipy@v1.2.0...v1.13.1) --- updated-dependencies: - dependency-name: scipy dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update scikit-learn requirement from <=1.4.2,>=0.21 to >=0.21,<=1.5.0 (ME-ICA#1101) Updates the requirements on [scikit-learn](https://github.com/scikit-learn/scikit-learn) to permit the latest version. - [Release notes](https://github.com/scikit-learn/scikit-learn/releases) - [Commits](scikit-learn/scikit-learn@0.21.0...1.5.0) --- updated-dependencies: - dependency-name: scikit-learn dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update numpy requirement from <=1.26.4,>=1.16 to >=1.16,<=2.0.0 (ME-ICA#1104) * Update numpy requirement from <=1.26.4,>=1.16 to >=1.16,<=2.0.0 Updates the requirements on [numpy](https://github.com/numpy/numpy) to permit the latest version. - [Release notes](https://github.com/numpy/numpy/releases) - [Changelog](https://github.com/numpy/numpy/blob/main/doc/RELEASE_WALKTHROUGH.rst) - [Commits](numpy/numpy@v1.16.0...v2.0.0) --- updated-dependencies: - dependency-name: numpy dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> * Use np.nan instead of np.NaN --------- Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Taylor Salo <[email protected]> * Filter out non-diagonal affine warning (ME-ICA#1103) * Filter out non-diagonal affine warning. * Fix warning capture. * Update tedana/reporting/static_figures.py Co-authored-by: Dan Handwerker <[email protected]> * Update static_figures.py --------- Co-authored-by: Dan Handwerker <[email protected]> * Update bokeh requirement from <=3.4.1,>=1.0.0 to <=3.5.0,>=3.5.0 (ME-ICA#1109) * Update bokeh requirement from <=3.4.1,>=1.0.0 to <=3.5.0,>=3.5.0 Updates the requirements on [bokeh](https://github.com/bokeh/bokeh) to permit the latest version. - [Changelog](https://github.com/bokeh/bokeh/blob/branch-3.6/docs/CHANGELOG) - [Commits](bokeh/bokeh@1.0.0...3.5.0) --- updated-dependencies: - dependency-name: bokeh dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> * Update pyproject.toml --------- Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Taylor Salo <[email protected]> * Update scikit-learn requirement from <=1.5.0,>=0.21 to <=1.5.1,>=1.5.1 (ME-ICA#1108) * Update scikit-learn requirement from <=1.5.0,>=0.21 to <=1.5.1,>=1.5.1 Updates the requirements on [scikit-learn](https://github.com/scikit-learn/scikit-learn) to permit the latest version. - [Release notes](https://github.com/scikit-learn/scikit-learn/releases) - [Commits](scikit-learn/scikit-learn@0.21.0...1.5.1) --- updated-dependencies: - dependency-name: scikit-learn dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> * Update pyproject.toml to restore minimum version of scikit-learn --------- Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Dan Handwerker <[email protected]> * Update scipy requirement from <=1.13.1,>=1.2.0 to <=1.14.0,>=1.14.0 (ME-ICA#1106) * Update scipy requirement from <=1.13.1,>=1.2.0 to <=1.14.0,>=1.14.0 Updates the requirements on [scipy](https://github.com/scipy/scipy) to permit the latest version. - [Release notes](https://github.com/scipy/scipy/releases) - [Commits](scipy/scipy@v1.2.0...v1.14.0) --- updated-dependencies: - dependency-name: scipy dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> * Update pyproject.toml to retain minimum version of scipy --------- Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Dan Handwerker <[email protected]> Co-authored-by: Eneko Uruñuela <[email protected]> * Update numpy requirement from <=2.0.0,>=1.16 to >=1.16,<=2.0.1 (ME-ICA#1112) Updates the requirements on [numpy](https://github.com/numpy/numpy) to permit the latest version. - [Release notes](https://github.com/numpy/numpy/releases) - [Changelog](https://github.com/numpy/numpy/blob/main/doc/RELEASE_WALKTHROUGH.rst) - [Commits](numpy/numpy@v1.16.0...v2.0.1) --- updated-dependencies: - dependency-name: numpy dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Cleaning up installation instructions (ME-ICA#1113) * install instructions * Update docs/installation.rst Co-authored-by: Taylor Salo <[email protected]> * Update docs/installation.rst Co-authored-by: Eneko Uruñuela <[email protected]> --------- Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: Eneko Uruñuela <[email protected]> * Update bokeh requirement from <=3.5.0,>=1.0.0 to >=1.0.0,<=3.5.1 (ME-ICA#1116) Updates the requirements on [bokeh](https://github.com/bokeh/bokeh) to permit the latest version. - [Changelog](https://github.com/bokeh/bokeh/blob/3.5.1/docs/CHANGELOG) - [Commits](bokeh/bokeh@1.0.0...3.5.1) --- updated-dependencies: - dependency-name: bokeh dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update list of multi-echo datasets (ME-ICA#1115) * Generate metrics from external regressors using F stats (ME-ICA#1064) * Get required metrics from decision tree. * Continue changes. * More updates. * Store necessary_metrics as a list. * Update selection_nodes.py * Update selection_utils.py * Update across the package. * Keep updating. * Update tedana.py * Add extra metrics to list. * Update ica_reclassify.py * Draft metric-based regressor correlations. * Fix typo. * Work on trees. * Expand regular expressions in trees. * Fix up the expansion. * Really fix it though. * Fix style issue. * Added external regress integration test * Got intregration test with external regressors working * Added F tests and options * added corr_no_detrend.json * updated names and reporting * Run black. * Address style issues. * Try fixing test bugs. * Update test_component_selector.py * Update component_selector.py * Use component table directly in selectcomps2use. * Fix. * Include generated metrics in necessary metrics. * Update component_selector.py * responding to feedback from tsalo * Update component_selector.py * Update test_component_selector.py * fixed some testing failures * fixed test_check_null_succeeds * fixed ica_reclassify bug and selector_properties test * ComponentSelector initialized before loading data * fixed docstrings * updated building decision tree docs * using external regressors and most tests passing * removed corr added tasks * fit_model moved to stats * removed and cleaned up external_regressors_config option * Added task regressors and some tests. Now alll in decision tree * cleaning up decision tree json files * removed mot12_csf.json changed task to signal * fixed tests with task_keep signal * Update tedana/metrics/external.py Co-authored-by: Taylor Salo <[email protected]> * Update tedana/metrics/_utils.py Co-authored-by: Taylor Salo <[email protected]> * Update tedana/metrics/collect.py Co-authored-by: Taylor Salo <[email protected]> * Update tedana/metrics/external.py Co-authored-by: Taylor Salo <[email protected]> * Update tedana/metrics/external.py Co-authored-by: Taylor Salo <[email protected]> * Responding to review comments * reworded docstring * Added type hints to external.py * fixed external.py type hints * type hints to _utils collect and component_selector * type hints and doc improvements in selection_utils * no expand_node recursion * removed expand_nodes expand_node expand_dict * docstring lines break on punctuation * updating external tests and docs * moved test data downloading to tests.utils.py and started test for fit_regressors * fixed bug where task regressors retained in partial models * matched testing external regressors to included mixing and fixed bugs * Made single function for detrending regressors * added tests for external fit_regressors and fix_mixing_to_regressors * Full tests in test_external_metrics.py * adding tests * fixed extern regress validation warnings and added tests * sorting set values for test outputs * added to test_metrics * Added docs to building_decision_trees.rst * Added motion task decision tree flow chart * made recommended change to external_regressor_config * Finished documentation and renamed demo decision trees * added link to example external regressors tsv file * Apply suggestions from code review Fixed nuissance typos Co-authored-by: Taylor Salo <[email protected]> * Minor documentation edits --------- Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: Neha Reddy <[email protected]> * Link to the open-multi-echo-data website (ME-ICA#1117) * Update multi-echo.rst * Update multi-echo.rst * Refactor `metrics.dependence` module (ME-ICA#1088) * Add type hints to metric functions. * Use keyword arguments. * Update tests. * Update dependence.py * Update collect.py * Fix other stuff. * documentation and resource updates (ME-ICA#1114) * documentation and resource updates * Fixed citation numbering and updated posters --------- Co-authored-by: Neha Reddy <[email protected]> * Adding already requested changes * fixed failing tests * updated documentation in faq.rst * more documentation changes --------- Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Matteo Visconti di Oleggio Castello <[email protected]> Co-authored-by: allcontributors[bot] <46447321+allcontributors[bot]@users.noreply.github.com> Co-authored-by: Eneko Uruñuela <[email protected]> Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: Neha Reddy <[email protected]>
handwerkerd
added a commit
that referenced
this pull request
Sep 23, 2024
…sults (#1013) * Add robustica method * Incorporation of major comments regarding robustica addition Manual modification of commit f2cdb4e to remove unwanted file additions. * Add robustica 0.1.3 to dependency list Cherry-pick of 41354cb. * Multiple fixes to RobustICA addition from code review From: BahmanTahayori#2. Co-authored-by: Robert E. Smith <[email protected]> * Specify magic number fixed seed of 42 as a constant Cherry-pick of da1b128 (with modification). * Updated * Robustica Updates * Incorporating the third round of Robert E. Smith's comments * Enhance the "ica_method" description suggested by D. Handwerker Co-authored-by: Dan Handwerker <[email protected]> * Enhancing the "n_robust_runs" description suggested by D. Handwerkerd Co-authored-by: Dan Handwerker <[email protected]> * RobustICA: Restructure code loop over robust methods (#4) * RobustICA: Restructure code loop over robust methods * Addressing the issue with try/except --------- Co-authored-by: Bahman <[email protected]> * Applied suggested changes In this commit, some of the comments from Daniel Handwerker and Robert Smith were incorporated. * Incorporating more comments * Fixing the problem of argument parser for n_robust_runs. * Removing unnecessary tests from the test_integration. There are 3 tests for echo as before, but the ica_method is robustica for five and three echos and fatsica for the four echo test. * Adding already requested changes * fixed failing tests * updated documentation in faq.rst * more documentation changes * Update docs/faq.rst Co-authored-by: Robert Smith <[email protected]> * Update docs/faq.rst Co-authored-by: Robert Smith <[email protected]> * Aligning robustICA with current Main + (#5) * Limit current adaptive mask method to brain mask (#1060) * Limit adaptive mask calculation to brain mask. Limit adaptive mask calculation to brain mask. Expand on logic of first adaptive mask method. Update tedana/utils.py Improve docstring. Update test. Add decreasing-signal-based adaptive mask. Keep removing. Co-Authored-By: Dan Handwerker <[email protected]> * Use `compute_epi_mask` in t2smap workflow. * Try fixing the tests. * Fix make_adaptive_mask. * Update test_utils.py * Update test_utils.py * Improve docstring. * Update utils.py * Update test_utils.py * Revert "Update test_utils.py" This reverts commit 259b002. * Don't take absolute value of echo means. * Log echo-wise thresholds in adaptive mask. * Add comment about non-zero voxels. * Update utils.py * Update test_utils.py * Update test_utils.py * Update test_utils.py * Log the thresholds again. * Address review. * Fix test. --------- Co-authored-by: Dan Handwerker <[email protected]> * Update nilearn requirement from <=0.10.3,>=0.7 to >=0.7,<=0.10.4 (#1077) * Add adaptive mask plot to report (#1073) * Update scikit-learn requirement (#1075) Updates the requirements on [scikit-learn](https://github.com/scikit-learn/scikit-learn) to permit the latest version. - [Release notes](https://github.com/scikit-learn/scikit-learn/releases) - [Commits](scikit-learn/scikit-learn@0.21.0...1.4.2) --- updated-dependencies: - dependency-name: scikit-learn dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update pandas requirement from <=2.2.1,>=2.0 to >=2.0,<=2.2.2 (#1076) Updates the requirements on [pandas](https://github.com/pandas-dev/pandas) to permit the latest version. - [Release notes](https://github.com/pandas-dev/pandas/releases) - [Commits](pandas-dev/pandas@v2.0.0...v2.2.2) --- updated-dependencies: - dependency-name: pandas dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update bokeh requirement from <=3.4.0,>=1.0.0 to >=1.0.0,<=3.4.1 (#1078) Updates the requirements on [bokeh](https://github.com/bokeh/bokeh) to permit the latest version. - [Changelog](https://github.com/bokeh/bokeh/blob/branch-3.5/docs/CHANGELOG) - [Commits](bokeh/bokeh@1.0.0...3.4.1) --- updated-dependencies: - dependency-name: bokeh dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Load user-defined mask as expected by plot_adaptive_mask (#1079) * DOC desc-optcomDenoised -> desc-denoised (#1080) * docs: add mvdoc as a contributor for code, bug, and doc (#1082) * docs: update README.md * docs: update .all-contributorsrc --------- Co-authored-by: allcontributors[bot] <46447321+allcontributors[bot]@users.noreply.github.com> * Identify the last good echo in adaptive mask instead of sum of good echoes (#1061) * Limit adaptive mask calculation to brain mask. Limit adaptive mask calculation to brain mask. Expand on logic of first adaptive mask method. Update tedana/utils.py Improve docstring. Update test. Add decreasing-signal-based adaptive mask. Keep removing. Co-Authored-By: Dan Handwerker <[email protected]> * Use `compute_epi_mask` in t2smap workflow. * Try fixing the tests. * Fix make_adaptive_mask. * Update test_utils.py * Update test_utils.py * Improve docstring. * Identify the last good echo instead of sum. Improve docstring. Update test_utils.py Update test_utils.py Fix make_adaptive_mask. Try fixing the tests. Use `compute_epi_mask` in t2smap workflow. Limit adaptive mask calculation to brain mask. Limit adaptive mask calculation to brain mask. Expand on logic of first adaptive mask method. Update tedana/utils.py Improve docstring. Update test. Add decreasing-signal-based adaptive mask. Keep removing. Co-Authored-By: Dan Handwerker <[email protected]> * Fix. * Update utils.py * Update utils.py * Try fixing. * Update utils.py * Update utils.py * add checks * Just loop over voxels. * Update utils.py * Update utils.py * Update test_utils.py * Revert "Update test_utils.py" This reverts commit 259b002. * Update test_utils.py * Update test_utils.py * Remove checks. * Don't take absolute value of echo means. * Log echo-wise thresholds in adaptive mask. * Add comment about non-zero voxels. * Update utils.py * Update utils.py * Update test_utils.py * Update test_utils.py * Update test_utils.py * Log the thresholds again. * Update test_utils.py * Update test_utils.py * Update test_utils.py * Add simulated data to adaptive mask test. * Clean up the tests. * Add value that tests the base mask. * Remove print in test. * Update tedana/utils.py Co-authored-by: Dan Handwerker <[email protected]> * Update tedana/utils.py Co-authored-by: Dan Handwerker <[email protected]> --------- Co-authored-by: Dan Handwerker <[email protected]> * Output RMSE map and time series for decay model fit (#1044) * Draft function to calculate decay model fit. * Calculate root mean squared error instead. * Incorporate metrics. * Output RMSE results. * Output results in tedana. * Hopefully fix things. * Update decay.py * Try improving performance. * Update decay.py * Fix again. * Use tqdm. * Update decay.py * Update decay.py * Update decay.py * Update expected outputs. * Add figures. * Update outputs. * Include global signal in confounds file. * Update fiu_four_echo_outputs.txt * Rename function. * Rename function. * Update tedana.py * Update tedana/decay.py Co-authored-by: Dan Handwerker <[email protected]> * Update decay.py * Update decay.py * Whoops. * Apply suggestions from code review Co-authored-by: Dan Handwerker <[email protected]> * Fix things maybe. * Fix things. * Update decay.py * Remove any files that are built through appending. * Update outputs. * Add section on plots to docs. * Fix the description. * Update docs/outputs.rst Co-authored-by: Dan Handwerker <[email protected]> * Update docs/outputs.rst * Fix docstring. --------- Co-authored-by: Dan Handwerker <[email protected]> * minimum nilearn 0.10.3 (#1094) * Use nearest-neighbors interpolation in `plot_component` (#1098) * Use nearest-neighbors interpolation in plot_stat_map. * Only use NN interp for component maps. * Update scipy requirement from <=1.13.0,>=1.2.0 to >=1.2.0,<=1.13.1 (#1100) Updates the requirements on [scipy](https://github.com/scipy/scipy) to permit the latest version. - [Release notes](https://github.com/scipy/scipy/releases) - [Commits](scipy/scipy@v1.2.0...v1.13.1) --- updated-dependencies: - dependency-name: scipy dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update scikit-learn requirement from <=1.4.2,>=0.21 to >=0.21,<=1.5.0 (#1101) Updates the requirements on [scikit-learn](https://github.com/scikit-learn/scikit-learn) to permit the latest version. - [Release notes](https://github.com/scikit-learn/scikit-learn/releases) - [Commits](scikit-learn/scikit-learn@0.21.0...1.5.0) --- updated-dependencies: - dependency-name: scikit-learn dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update numpy requirement from <=1.26.4,>=1.16 to >=1.16,<=2.0.0 (#1104) * Update numpy requirement from <=1.26.4,>=1.16 to >=1.16,<=2.0.0 Updates the requirements on [numpy](https://github.com/numpy/numpy) to permit the latest version. - [Release notes](https://github.com/numpy/numpy/releases) - [Changelog](https://github.com/numpy/numpy/blob/main/doc/RELEASE_WALKTHROUGH.rst) - [Commits](numpy/numpy@v1.16.0...v2.0.0) --- updated-dependencies: - dependency-name: numpy dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> * Use np.nan instead of np.NaN --------- Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Taylor Salo <[email protected]> * Filter out non-diagonal affine warning (#1103) * Filter out non-diagonal affine warning. * Fix warning capture. * Update tedana/reporting/static_figures.py Co-authored-by: Dan Handwerker <[email protected]> * Update static_figures.py --------- Co-authored-by: Dan Handwerker <[email protected]> * Update bokeh requirement from <=3.4.1,>=1.0.0 to <=3.5.0,>=3.5.0 (#1109) * Update bokeh requirement from <=3.4.1,>=1.0.0 to <=3.5.0,>=3.5.0 Updates the requirements on [bokeh](https://github.com/bokeh/bokeh) to permit the latest version. - [Changelog](https://github.com/bokeh/bokeh/blob/branch-3.6/docs/CHANGELOG) - [Commits](bokeh/bokeh@1.0.0...3.5.0) --- updated-dependencies: - dependency-name: bokeh dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> * Update pyproject.toml --------- Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Taylor Salo <[email protected]> * Update scikit-learn requirement from <=1.5.0,>=0.21 to <=1.5.1,>=1.5.1 (#1108) * Update scikit-learn requirement from <=1.5.0,>=0.21 to <=1.5.1,>=1.5.1 Updates the requirements on [scikit-learn](https://github.com/scikit-learn/scikit-learn) to permit the latest version. - [Release notes](https://github.com/scikit-learn/scikit-learn/releases) - [Commits](scikit-learn/scikit-learn@0.21.0...1.5.1) --- updated-dependencies: - dependency-name: scikit-learn dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> * Update pyproject.toml to restore minimum version of scikit-learn --------- Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Dan Handwerker <[email protected]> * Update scipy requirement from <=1.13.1,>=1.2.0 to <=1.14.0,>=1.14.0 (#1106) * Update scipy requirement from <=1.13.1,>=1.2.0 to <=1.14.0,>=1.14.0 Updates the requirements on [scipy](https://github.com/scipy/scipy) to permit the latest version. - [Release notes](https://github.com/scipy/scipy/releases) - [Commits](scipy/scipy@v1.2.0...v1.14.0) --- updated-dependencies: - dependency-name: scipy dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> * Update pyproject.toml to retain minimum version of scipy --------- Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Dan Handwerker <[email protected]> Co-authored-by: Eneko Uruñuela <[email protected]> * Update numpy requirement from <=2.0.0,>=1.16 to >=1.16,<=2.0.1 (#1112) Updates the requirements on [numpy](https://github.com/numpy/numpy) to permit the latest version. - [Release notes](https://github.com/numpy/numpy/releases) - [Changelog](https://github.com/numpy/numpy/blob/main/doc/RELEASE_WALKTHROUGH.rst) - [Commits](numpy/numpy@v1.16.0...v2.0.1) --- updated-dependencies: - dependency-name: numpy dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Cleaning up installation instructions (#1113) * install instructions * Update docs/installation.rst Co-authored-by: Taylor Salo <[email protected]> * Update docs/installation.rst Co-authored-by: Eneko Uruñuela <[email protected]> --------- Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: Eneko Uruñuela <[email protected]> * Update bokeh requirement from <=3.5.0,>=1.0.0 to >=1.0.0,<=3.5.1 (#1116) Updates the requirements on [bokeh](https://github.com/bokeh/bokeh) to permit the latest version. - [Changelog](https://github.com/bokeh/bokeh/blob/3.5.1/docs/CHANGELOG) - [Commits](bokeh/bokeh@1.0.0...3.5.1) --- updated-dependencies: - dependency-name: bokeh dependency-type: direct:production ... Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> * Update list of multi-echo datasets (#1115) * Generate metrics from external regressors using F stats (#1064) * Get required metrics from decision tree. * Continue changes. * More updates. * Store necessary_metrics as a list. * Update selection_nodes.py * Update selection_utils.py * Update across the package. * Keep updating. * Update tedana.py * Add extra metrics to list. * Update ica_reclassify.py * Draft metric-based regressor correlations. * Fix typo. * Work on trees. * Expand regular expressions in trees. * Fix up the expansion. * Really fix it though. * Fix style issue. * Added external regress integration test * Got intregration test with external regressors working * Added F tests and options * added corr_no_detrend.json * updated names and reporting * Run black. * Address style issues. * Try fixing test bugs. * Update test_component_selector.py * Update component_selector.py * Use component table directly in selectcomps2use. * Fix. * Include generated metrics in necessary metrics. * Update component_selector.py * responding to feedback from tsalo * Update component_selector.py * Update test_component_selector.py * fixed some testing failures * fixed test_check_null_succeeds * fixed ica_reclassify bug and selector_properties test * ComponentSelector initialized before loading data * fixed docstrings * updated building decision tree docs * using external regressors and most tests passing * removed corr added tasks * fit_model moved to stats * removed and cleaned up external_regressors_config option * Added task regressors and some tests. Now alll in decision tree * cleaning up decision tree json files * removed mot12_csf.json changed task to signal * fixed tests with task_keep signal * Update tedana/metrics/external.py Co-authored-by: Taylor Salo <[email protected]> * Update tedana/metrics/_utils.py Co-authored-by: Taylor Salo <[email protected]> * Update tedana/metrics/collect.py Co-authored-by: Taylor Salo <[email protected]> * Update tedana/metrics/external.py Co-authored-by: Taylor Salo <[email protected]> * Update tedana/metrics/external.py Co-authored-by: Taylor Salo <[email protected]> * Responding to review comments * reworded docstring * Added type hints to external.py * fixed external.py type hints * type hints to _utils collect and component_selector * type hints and doc improvements in selection_utils * no expand_node recursion * removed expand_nodes expand_node expand_dict * docstring lines break on punctuation * updating external tests and docs * moved test data downloading to tests.utils.py and started test for fit_regressors * fixed bug where task regressors retained in partial models * matched testing external regressors to included mixing and fixed bugs * Made single function for detrending regressors * added tests for external fit_regressors and fix_mixing_to_regressors * Full tests in test_external_metrics.py * adding tests * fixed extern regress validation warnings and added tests * sorting set values for test outputs * added to test_metrics * Added docs to building_decision_trees.rst * Added motion task decision tree flow chart * made recommended change to external_regressor_config * Finished documentation and renamed demo decision trees * added link to example external regressors tsv file * Apply suggestions from code review Fixed nuissance typos Co-authored-by: Taylor Salo <[email protected]> * Minor documentation edits --------- Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: Neha Reddy <[email protected]> * Link to the open-multi-echo-data website (#1117) * Update multi-echo.rst * Update multi-echo.rst * Refactor `metrics.dependence` module (#1088) * Add type hints to metric functions. * Use keyword arguments. * Update tests. * Update dependence.py * Update collect.py * Fix other stuff. * documentation and resource updates (#1114) * documentation and resource updates * Fixed citation numbering and updated posters --------- Co-authored-by: Neha Reddy <[email protected]> * Adding already requested changes * fixed failing tests * updated documentation in faq.rst * more documentation changes --------- Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Matteo Visconti di Oleggio Castello <[email protected]> Co-authored-by: allcontributors[bot] <46447321+allcontributors[bot]@users.noreply.github.com> Co-authored-by: Eneko Uruñuela <[email protected]> Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: Neha Reddy <[email protected]> * align with main * fixed ica.py docstring error * added scikit-learn-extra to pyproject and changed ref name * increment circleci version keys * Removing the scikit-learn-extra dependency * Updating pyproject.toml file * Minor changes to make the help more readable * Minor changes * upgrading to robustica 0.1.4 * Update docs Co-authored-by: Dan Handwerker <[email protected]> * updating utils.py, toml file and the docs * minor change to utils.py * Incorporating Eneko's comments Co-authored-by: Eneko Uruñuela <[email protected]> * Added a warning when the clustering method is changed --------- Signed-off-by: dependabot[bot] <[email protected]> Co-authored-by: Robert E. Smith <[email protected]> Co-authored-by: Dan Handwerker <[email protected]> Co-authored-by: handwerkerd <[email protected]> Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: dependabot[bot] <49699333+dependabot[bot]@users.noreply.github.com> Co-authored-by: Matteo Visconti di Oleggio Castello <[email protected]> Co-authored-by: allcontributors[bot] <46447321+allcontributors[bot]@users.noreply.github.com> Co-authored-by: Eneko Uruñuela <[email protected]> Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: Taylor Salo <[email protected]> Co-authored-by: Neha Reddy <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Updates the requirements on scipy to permit the latest version.
Release notes
Sourced from scipy's releases.
... (truncated)
Commits
87c4664REL: SciPy 1.14.0 rel commit [wheel build]ac63c81Merge pull request #21019 from tylerjereddy/treddy_1.14.0_final_backports541003fDOC: update 1.14 relnotes [wheel build]a08d1ffMAINT: stats.gstd: warn when an observation is <= 0a4f7119DEP: special.perm: deprecate non-integerNandkwithexact=True(#20909)73339fbTST: stats: fix use of np.testing to compare xp-arrays0542df6DOC: Update 1.14.0 release notesf8e530cSTY: _lib._util: silence mypye2cbda2TST:sparse.linalg: Skip test due to sensitivity to numerical noise4fb2e6aTST: robustify test_nnls_inner_loop_case1Dependabot will resolve any conflicts with this PR as long as you don't alter it yourself. You can also trigger a rebase manually by commenting
@dependabot rebase.Dependabot commands and options
You can trigger Dependabot actions by commenting on this PR:
@dependabot rebasewill rebase this PR@dependabot recreatewill recreate this PR, overwriting any edits that have been made to it@dependabot mergewill merge this PR after your CI passes on it@dependabot squash and mergewill squash and merge this PR after your CI passes on it@dependabot cancel mergewill cancel a previously requested merge and block automerging@dependabot reopenwill reopen this PR if it is closed@dependabot closewill close this PR and stop Dependabot recreating it. You can achieve the same result by closing it manually@dependabot show <dependency name> ignore conditionswill show all of the ignore conditions of the specified dependency@dependabot ignore this major versionwill close this PR and stop Dependabot creating any more for this major version (unless you reopen the PR or upgrade to it yourself)@dependabot ignore this minor versionwill close this PR and stop Dependabot creating any more for this minor version (unless you reopen the PR or upgrade to it yourself)@dependabot ignore this dependencywill close this PR and stop Dependabot creating any more for this dependency (unless you reopen the PR or upgrade to it yourself)