Command Line Scripts for ZJU (VPN / WLAN / DNS)
-
ZJU VPN (l2tp)
-
ZJUWLAN
-
Router support
-
Overlap network dialing (with load balance)
-
Overlap bandwidth of ZJUWLAN and ZJU VPN (1 WLAN + N VPN, Using ZJUWLAN)
-
Automatic DNS setting (in case DNS do not work)
-
xl2tpd
-
curl
-
dig(Different package on different platform)
If you meet any problem during or after the installation, check Troubleshooting section below in this documentation.
curl https://dl.zjuqsc.com/linux/qsc.public.key | sudo apt-key add -
curl https://dl.zjuqsc.com/linux/debian/qsc.list | sudo tee /etc/apt/sources.list.d/qsc.list
sudo apt-get update
sudo apt-get install zjunet- The installation has completed.
- If you are setting up a server, we suggest you run
zjunet wlan disableto disable WLAN capability.
-
Configure EPEL of ZJU mirrors (Taking CentOS installation as an example)
- Run
yum install epel-releaseto install EPEL. - Edit
/etc/yum.repos.d/epel.repo, uncomment lines begin with#baseurl=(Remove leading#sign) and comment lines begin withmirrorlist=(Prepend#sign) - Edit
/etc/yum.repos.d/epel.repo, replacehttps://download.fedoraproject.org/pubwithhttps://mirrors.zju.edu.cn.
- Run
-
Run these command.
curl https://dl.zjuqsc.com/linux/qsc.public.key | sudo tee /etc/pki/rpm-gpg/RPM-GPG-KEY-QSC-COMP66
curl https://dl.zjuqsc.com/linux/yum/qsc.repo | sudo tee /etc/yum.repos.d/qsc.repo
sudo rpm --import /etc/pki/rpm-gpg/RPM-GPG-KEY-QSC-COMP66
sudo yum install zjunet- The installation has completed.
- If you are setting up a server, we suggest you run
zjunet wlan disableto disable WLAN capability.
Download .opk package from Release Page (onto your router),
Run opkg install ./zjunet_<version>_all.opk.
Simply run yay zjunet to build the package from AUR and install it.
Keep in mind that a fresh install without internet connection is almost impossible. Please complete installation before connecting to the intranet.
xl2tpd -v; curl -V; dig -v # Check installation of dependencies. There should be 3 version numbers.
# Under proper directory
git clone https://github.com/QSCTech/zjunet.git
cd zjunet
sudo ./install.sh
# If update is necessary, run `git pull` and `sudo ./install.sh`
# If you are setting up a server, we suggest you run `zjunet wlan disable` to disable WLAN capability.ATTENTION Requirement check will NOT be done running ./install.sh.
Please run xl2tpd -v, curl -V and dig -v to verify the installation.
This is a known issue. When overlapping VPN and ZJUWLAN, network packet may be lost. (because of nexthop in routing table).
Contributions to this issue are welcomed. (Maybe using iptables)
Set lcp-echo-failure larger in /etc/ppp/options.
See also #39
Please send mail to [email protected] if you have any other problem.
QSCers may Push directly without sending Pull Requests。
Please write an Issue if you have worries. Contact maintainer directly if necessary.
PRs from non-QSCers are also welcomed.
(Not finished yet)
sudo apt-get install build-essential autoconf automake autotools-dev dh-make \
debhelper devscripts fakeroot xutils lintian pbuilder rpm
cd build
./build.sh