PyAuthenNTLM2 is an authentication module for Apache.
It validates a user by means of the NTLM protocol and a separate Domain Controller (or Active Directory server).
The specific use case of PyAuthenNTLM2 is the following:
- Users have valid accounts in an existing Windows domain, and you want such credentials to be used for HTTP authentication.
- Apache runs on a server that is not part of the Windows domain.
- Some of the users cannot use Kerberos. For instance, they connect via a proxy or they use machines that are not part of the domain. However, their client supports NTLM (all browsers do nowadays).
- Some of the users can only use Basic, not even NTLM (possibly because they don't use a browser).
- [EXPERIMENTAL] Only users that belong to certain groups are authorized. The groups are defined on the Active Directory server.
PyAuthenNTLM2 allows clients to authenticate via two schemes: NTLM or Basic.
As for several other authorization modules, PyAuthenNTLM2 will pass the username
to the underlying CGI application or webservice via the REMOTE_USER variable.
The user name is the Windows logon identifier, without the domain part
(that is, jdoe and not DOMAIN\jdoe or John Doe).
Although Kerberos (including its Microsoft variant "Integrated Windows Authentication") is the best option in terms of security for HTTP authentication, the venerable NTLM protocol is still a good compromise, much better than the widespread Basic protocol and marginally better than Digest. With Basic, anybody can pick up your password from the messages sent to the server (unless you use TLS), whereas with Digest the web server needs local access to the actual password. With NTLM, the webserver can relay every authorization requests to the (Domain Controller or Active Directory server): it never has to neither see nor store the real passwords.
A typical message flow is the following. First, the server (Apache) refuses any request on a new connection:
Client ----[GET]---> Apache Client <---[401]---- Apache , WWW-Authenticate: NTLM
The client crafts a first NTLM message to negotiate the authentication parameters. Such message (Type 1) is relayed straight to the Domain Controller:
Client ----[GET]---> Apache , Authorization: TlRMT... (Type 1 message)
Apache ----[Type 1]---> DC
The Domain Controller generates a random challenge, completes the negotiation, and sends back the message. The message (Type 2) is relayed to the client:
Apache <---[Type 2]---- DC Client <---[401]---- Apache , WWW-Authenticate: NTLM TlRMT... (Type 2 message)
The client presents the popup dialog to the user to acquire the credentials. The password is only used to encrypt the challenge. The resulting message (Type 3) is relayed to the Domain Controller, which will communicate to the server if the user is authentic or not:
Client ----[GET]---> Apache , Authorization: TlRMT... (Type 3 message)
Apache ----[Type 3]---> DC
Apache <---[Result]---- DC
Client <---[200]---- Apache
The password is never disclosed by the client. However, several versions of NTLM exist. NTLMv1 is based on cryptography that by today standards is very weak. That means that the password can be still brute forced from the encrypted challenge. In order to avoid that, ensure that your clients always use NTLMv2 [1].
PyAuthenNTLM2 handles equally well all the various NTLM variants (such as NTLMv2 Session, and NTLMv2).
- Mod-python [2]
- Python 2.x
- Apache 2.x
- PyCrypto 2.x (not required, but Basic auth will not be supported without it)
Tests were carried out with:
- a server with mod-python 3.3.1, Apache 2.2, and Python 2.6.
- clients with Internet Explorer 7/8, Firefox 7.0, and Chrome.
- Windows 2003 Domain Controller and Active Directory server
python setup.py install -f
Usage is best shown by an example of Apache configuration:
<Directory /var/lib/some_directory> AuthType NTLM AuthName WDOMAIN require valid-user PythonAuthenHandler pyntlm PythonOption Domain WDOMAIN PythonOption PDC 192.1.2.45 PythonOption BDC 192.1.2.46 # Bypass authentication for local clients. # Comment these lines if they should authenticate too. Order deny,allow Deny from all Allow from 127.0.0.1 Satify any </Directory>
All non-local clients trying to access a URI mapped under the directory
/var/lib/some_directory will be asked for credentials valid in the Windows
Domain WDOMAIN. The user name to enter need to be in the format:
wdomain\useridentifier (for instance windom\jbrown).
Local clients (that is, those connecting from 127.0.0.1) will not be presented
with any request for authentication.
The following options exist:
| Apache option | Description |
|---|---|
| AuthType NTLM | Always specify it like this. |
| Require valid-user | Always specify it like this. |
| Require user XYZ,WTY | Grants access only to users named XYZ or WTY.
Multiple "Require user" option lines can be specified.
|
| AuthName domain | Replace domain with the domain name to present to users in the pop-up dialog. |
| PythonAuthenHandler pyntlm|path | Use simply pyntlm, unless the actual pyntlm.py script is not in the search path for python for the mod-python interpreter. In that case, specify the complete file name (with absolute path) to the script. |
| PythonOption Domain domain | Replace domain with the Windows domain name (uppercase). |
| PythonOption PDC pdc | Replace pdc with the address of the Primary Domain Controller (either IP or DNS name). |
| PythonOption BDC bdc | Replace bdc with the address of the Backup Domain Controller (either IP or DNS name). This entry is optional. |
| PythonOption NameFmt SAM|LogOn | Set REMOTE_USER to the user name only (SAM) or to the legacy Logon format (domainusername). This entry is optional. SAM is the default. |
Apache needs to be configured to send keep alives (directive KeepAlive On).
For SSL-protected sites, comment out the statement:
SetEnvIf User-Agent ".*MSIE.*" \
nokeepalive ssl-unclean-shutdown \
downgrade-1.0 force-response-1.0
from the default Apache virtual host, or Internet Explorer will not manage to make use of NTLM.
The [pdc]/[bdc] settings may also refer to an Active Directory server. The syntax becomes slightly more complex:
ldap://server[/baseDN]
where server is the IP or DNS name of the Active Directory server, and the
optional baseDN is the base Distinguished Name for the queries (only needed
for authorization, see below). For instance:
ldap://10.12.13.1/DC=nasa,DC=gov
or equivalently (but more in compliance to RFC4516):
ldap://10.12.13.1/DC%3Dnasa%2CDC%3Dgov
When using an Active Directory server, it is also possible to check if the user is authorized to access page. More precisely, it is possible to grant access only if the user is member of one group.
The option Require group can be used to pass the comma-separated list of groups
the user must belong to. The group identifier is the logon name, that is,
the sAMAccountName attribute in Active Directory.
The check is performed iteratively. In other words, the check is successful if the user belongs to a group with the given name, or to a sub-group (of any order, up the hierarchy) who belongs to the sought group.
For instance, if you specified:
<Directory /var/lib/some_directory> [ ... ] Require group Administrators,Power Users [ ... ] </Directory>
Only users that belong to Administrators or Power Users will be granted access.
If the user belonged to a sub-group of Power Users called
Super Power Users, they would pass the check too.
A user that does not belong to any of such groups is denied access, even if
its credentials were correct, unless its name is included in a Require user
option.
NTLM is a protocol that authenticates TCP connections, not the individual request like Basic or Digest.
PyAuthenNTLM2 does not cache successful autentications. Every time a new connection is established, you will see a query to the Domain Controller or Active Directory from Apache. Browsers will typically open several connections in parallel. Additionally, some browsers may also trigger re-autentication within an established connection (e.g. Internet Explorer for POST requests).
However, at the client side, browsers will do cache NTLM credentials, which won't be asked again to ther user after the first time (which is the whole point of Single Sign On!).
PyAuthenNTLM2 will cache positive group membership for 3 hours. That means that if you remove a user from a group, such user will still be able to access for up to 3 hours, unless you restart Apache. On the other hand, if you add the user to a group, access should be granted immediately.
All logs will show up in the Apache log file.
Check list:
Restart Apache each time you modify its configuration.
Ensure that
KeepAliveisOn.Verify with various browser brands and versions, not just with one.
If use SSL and cannot access using Internet Explorer but other browsers work, ensure that the
User-Agent MSIEsetting (see Usage above) is commented out in your site configuration.Increase the level of verbosity for the Apache log up to
Info. Note that the LogLevel may be specified in multiple places in the Apache configuration. Ensure you are not setting the log level too high in the directory hierarchy.Ensure that mod-python is installed and activated. In the log file you should see messages like this:
[notice] mod_python: Creating 8 session mutexes based on 150 max processes and 0 max threads.
Ensure that mod-python can find pyntlm.py. You should be able to see the following line for each a request, if the log level is set to
Info.[info] [client 127.0.0.1] PYNTLM: Handling connection 0x0 from address 127.0.0.1 for GET URI /mysite/request
If you are using group authorization, try without it, so that all users with a valid account can access the pages.
Ensure that the authentication code is compatible with your Domain Controller, at least if you use a DC. Use the ntlm_client.py utility with the same settings from the Apache configuration:
python PyAuthenNTLM2/ntlm_client.py -u johndoe -p xxxxx -d DOMAINX -a 10.11.12.13
If you use an Active Directory server:
python PyAuthenNTLM2/ntlm_client.py -u johndoe -p xxxxx -d DOMAINX -a ldap://10.11.12.13
You should see the message:
User DOMAINX\johndoe was authenticated.
Ensure that the browser is not using a configuration incompatible with the module. Use the http_client.py utility with the same settings from the Apache configuration. In case of NTLM autentication:
python http_client.py -s johndoe -p xxxxx -d DOMAINX http://apachesite/path/to/page
And in case of Basic authentication:
python http_client.py -s johndoe -p xxxxx http://apachesite/path/to/page
In either case you should see the message:
OK.
Ensure you are not using group authorization check with a Domain Controller; that is not currently supported. It only works with an Active Directory server.
If you are using group authorization check with an ActiveDirectory server, ensure that the base DN is correct in the Apache configuration file. See [3].
If you are using group authorization check with an ActiveDirectory server, check if LDAP signing is required in the server. That is not currently supported by this module.
Ensure that the group authorization code is compatible with your Active Directory server. Use the ntlm_client.py utility with the same settings from the Apache configuration:
python PyAuthenNTLM2/ntlm_client.py -u johndoe -p xxxxx -d DOMAINX -g Administrators -a ldap://10.11.12.13/DC=nasa,DC=gov
You should see both 2 messages:
User DOMAINX\johndoe was authenticated. User belongs to at least one group.
If you have a problem of membership with a specific user you don't have the password for, you can explicit check what ntlm_client finds for that user, while authenticating with another accunt:
python PyAuthenNTLM2/ntlm_client.py -u otheraccount -p xxxxx -d DOMAINX -g Administrators -a ldap://10.11.12.13/DC=nasa,DC=gov -m johndoe -v
You should see plenty of messages with the various DNs of the groups the user
johndoeis found to be member of.
Send an email to Legrandin <[email protected]> or drop a message at https://github.com/Legrandin/PyAuthenNTLM2.