The OpenStudio GEB measure gem is an open source OpenStudio library that can be plug-and-play into existing OpenStudio-based platforms. It was developed by Lawrence Berkeley National Laboratory since 2020. It now has 22 GEB measures implemented, spanning various building systems like lighting, plug load, envelope, hvac, domestic hot water, electric vehicle, and PV.
Three of the GEB measures in this gem were integrated into NREL's URBANopt platform to support load flexibility analysis. They are "Reduce EPD by Percentage for Peak Hours", "Adjust thermostat setpoint by degrees for peak hours", and "Add Chilled Water Storage Tank".
Add this line to your application's Gemfile:
gem 'openstudio-geb'And then execute:
$ bundle install
Or install it yourself as:
$ gem install 'openstudio-geb'
- Reduce EPD by percentage for peak hours
- Reduce LPD by percentage for peak hours
- Adjust thermostat setpoint by degrees for peak hours
- Reduce domestic hot water use for peak hours
- Average ventilation for peak hours
- Add chilled water storage tank
- Add electrochromic windows
- add_exterior_blinds_and_control
- add_interior_blinds_and_control
- Add fan assist night ventilation with hybrid control
- Add natural ventilation with hybrid control
- Add heat pump water heater
- Adjust domestic hot water setpoint
- Add rooftop PV
- Add electric vehicle charging load
- Add ceiling fan
- Apply dynamic coating to roof wall
- Enable demand controlled ventilation
- Enable occupancy-driven lighting
- Precooling
- Preheating
- Reduce exterior lighting loads
Kaiyu Sun (Lead developer), [email protected]
Tianzhen Hong (Principal investigator), [email protected]