BIP utility library

Introduction

This package allows generating mnemonics, seeds, private/public keys and addresses for different types of cryptocurrencies. In particular:

Mnemonic and seed generation as defined by BIP-0039
Keys derivation as defined by BIP-0032 and SLIP-0010
Derivation of a hierarchy of keys as defined by BIP-0044, BIP-0049 and BIP-0084
Mnemonic and seed generation for Substrate (Polkadot/Kusama ecosystem)
Keys derivation for Substrate (Polkadot/Kusama ecosystem, same of Polkadot-JS)
Mnemonic and seed generation for Monero
Keys and addresses/subaddresses generation for Monero (same of official Monero wallet)

Other implemented functionalities:

Parse BIP-0032 derivation paths
Parse Substrate derivation paths
Encode addresses for all the supported coins
Encode/Decode WIF
Encode/Decode base58
Encode/Decode ss58
Encode/Decode segwit bech32
Encode/Decode Bitcoin Cash bech32

Package dependencies:

crcmod for CRC computation
pycryptodome for keccak256 and SHA512/256
coincurve for secp256k1 curve
ecdsa for nist256p1 and secp256k1 curves
ed25519-blake2b for ed25519-blake2b curve
pynacl for ed25519 curve
py-sr25519-bindings for sr25519 curve
scalecodec for SCALE encoding

Supported coins

Supported BIP coins:

Algorand
Avalanche (all the 3 chains)
Band Protocol
Binance Chain
Binance Smart Chain
Bitcoin (and related test net)
Bitcoin Cash (and related test net)
Bitcoin Cash Simple Ledger Protocol (and related test net)
BitcoinSV (and related test net)
Celo
Cosmos
Dash (and related test net)
Dogecoin (and related test net)
eCash (and related test net)
Elrond
EOS
Ethereum
Ethereum Classic
Fantom Opera
Filecoin
Harmony One (Ethereum and Cosmos addresses)
Huobi Heco Chain
IRIS Network
Kava
Kusama (based on BIP44 and ed25519 SLIP-0010, like TrustWallet, it won't generate the same addresses of Polkadot-JS)
Litecoin (and related test net)
Monero (based on BIP44 and secp256k1 or ed25519 SLIP-0010, it won't generate the same addresses of the official wallets but it supports subaddresses generation)
Nano
NEO
OKEx Chain (Ethereum and Cosmos addresses)
Ontology
Osmosis
Polkadot (based on BIP44 and ed25519 SLIP-0010, like TrustWallet, it won't generate the same addresses of Polkadot-JS)
Polygon
Ripple
Secret Network
Solana
Stellar
Terra
Tezos
Theta Network
Tron
VeChain
Verge
Zcash (and related test net)
Zilliqa

Supported Substrate coins:

Acala
Bifrost
Chainx
Edgeware
Karura
Kusama
Moonbeam
Moonriver
Phala Network
Plasm Network
Sora
Stafi
Polkadot
Generic Substrate coin

For what regards Monero, it's also possible to generate the same addresses of the official wallets without using BIP44 derivation.

Clearly, for those coins that support Smart Contracts (e.g. Ethereum, Tron, ...), the generated keys and addresses are valid for all the related tokens.\

Install the package

For the secp256k1 curve, it's possible to use either the coincurve or the ecdsa library. coincurve is much faster since it's a Python wrapper to the secp256k1 C library, while ecdsa is a pure Python implementation.
By default, coincurve will be used but it's possible to disable it when installing.

To install the package:

Default installation (coincurve will be used for secp256k1)
- Using setuptools:
```
  python setup.py install
```
- Using pip, from this directory (local):
```
  pip install .
```
- Using pip, from PyPI:
```
  pip install bip_utils
```

Alternative installation (ecdsa will be used for secp256k1)

Using setuptools:

  python setup.py install --coincurve=0

Using pip, from this directory (local):

  pip install . --install-option="--coincurve=0"

Using pip, from PyPI:

  pip install bip_utils --install-option="--coincurve=0"

To run tests:

python -m unittest discover

Or you can install tox:

pip install tox

And then:

Run tests using pytest (it includes code coverage and report):
```
  tox -e pytest
```
Run tests using coverage (it includes code coverage and report):
```
  tox -e coverage
```

BIP-0039 library

The BIP-0039 library allows to:

Generate mnemonics from words number or entropy bytes
Validate a mnemonic
Get back the entropy bytes from a mnemonic
Generate the seed from a mnemonic

Mnemonic generation

A mnemonic phrase can be generated by specifying the words number (in this case a random entropy will be used) or directly by the entropy bytes.

Supported words number:

Words number	Enum
12	Bip39WordsNum.WORDS_NUM_12
15	Bip39WordsNum.WORDS_NUM_15
18	Bip39WordsNum.WORDS_NUM_18
21	Bip39WordsNum.WORDS_NUM_21
24	Bip39WordsNum.WORDS_NUM_24

Supported entropy bits:

Entropy bits	Enum
128	Bip39EntropyBitLen.BIT_LEN_128
160	Bip39EntropyBitLen.BIT_LEN_160
192	Bip39EntropyBitLen.BIT_LEN_192
224	Bip39EntropyBitLen.BIT_LEN_224
256	Bip39EntropyBitLen.BIT_LEN_256

Supported languages:

Language	Enum
Chinese (simplified)	Bip39Languages.CHINESE_SIMPLIFIED
Chinese (traditional)	Bip39Languages.CHINESE_TRADITIONAL
Czech	Bip39Languages.CZECH
English	Bip39Languages.ENGLISH
French	Bip39Languages.FRENCH
Italian	Bip39Languages.ITALIAN
Korean	Bip39Languages.KOREAN
Portuguese	Bip39Languages.PORTUGUESE
Spanish	Bip39Languages.SPANISH

Code example

import binascii
from bip_utils import Bip39EntropyBitLen, Bip39EntropyGenerator, Bip39MnemonicGenerator, Bip39WordsNum, Bip39Languages

# Generate a random mnemonic string of 12 words with default language (English)
# A Mnemonic object will be returned
mnemonic = Bip39MnemonicGenerator().FromWordsNumber(Bip39WordsNum.WORDS_NUM_12)

# Get words count
print(mnemonic.WordsCount())
# Get as string
print(mnemonic.ToStr())
print(str(mnemonic))
# Get as list of strings
print(mnemonic.ToList())

# Generate a random mnemonic string of 15 words by specifying the language
mnemonic = Bip39MnemonicGenerator(Bip39Languages.ITALIAN).FromWordsNumber(Bip39WordsNum.WORDS_NUM_15)

# Generate the mnemonic string from entropy bytes
entropy_bytes = binascii.unhexlify(b"00000000000000000000000000000000")
mnemonic = Bip39MnemonicGenerator().FromEntropy(entropy_bytes)
mnemonic = Bip39MnemonicGenerator(Bip39Languages.FRENCH).FromEntropy(entropy_bytes)

# Generate mnemonic from random 192-bit entropy
entropy_bytes = Bip39EntropyGenerator(Bip39EntropyBitLen.BIT_LEN_192).Generate()
mnemonic = Bip39MnemonicGenerator().FromEntropy(entropy_bytes)

Mnemonic validation

A mnemonic string can be validated by verifying its language and checksum. Moreover, it is also possible to get back the entropy bytes from a mnemonic.
When validating, the language can be either specified or automatically detected.
Automatic detection takes more time, so if the mnemonic language is known in advance it'll be better to specify it at construction.

Code example

from bip_utils import (
    Bip39ChecksumError, Bip39Languages, Bip39WordsNum, Bip39MnemonicGenerator, Bip39MnemonicValidator, Bip39MnemonicDecoder
)

# Mnemonic can be generated with Bip39MnemonicGenerator
mnemonic = Bip39MnemonicGenerator().FromWordsNumber(Bip39WordsNum.WORDS_NUM_15)
# Or it can be a string
mnemonic = "abandon abandon abandon abandon abandon abandon abandon abandon abandon abandon abandon about"

# Get if a mnemonic is valid, return bool
is_valid = Bip39MnemonicValidator().IsValid(mnemonic)
# Validate a mnemonic, raise exceptions
try:
    Bip39MnemonicValidator().Validate(mnemonic)
    # Valid...
except Bip39ChecksumError:
    # Invalid checksum...
    pass
except ValueError:
    # Invalid length or language...
    pass

# Use Bip39MnemonicDecoder to get back the entropy bytes from a mnemonic, specifying the language
entropy_bytes = Bip39MnemonicDecoder(Bip39Languages.ENGLISH).Decode(mnemonic)
# Like before with automatic language detection
entropy_bytes = Bip39MnemonicDecoder().Decode(mnemonic)

# Alternatively, it's possible to get back the entropy bytes with the computed checksum
entropy_chksum_bytes = Bip39MnemonicDecoder(Bip39Languages.ENGLISH).DecodeWithChecksum(mnemonic)

Seed generation

A secure 64-byte seed is generated from a mnemonic and can be protected by a passphrase.
This seed can be used to construct a Bip class using the FromSeed method (e.g. Bip44.FromSeed).
Also in this case, the language can be specified or automatically detected.

Code example

from bip_utils import Bip39Languages, Bip39WordsNum, Bip39MnemonicGenerator, Bip39SeedGenerator

# Mnemonic can be generated with Bip39MnemonicGenerator
mnemonic = Bip39MnemonicGenerator().FromWordsNumber(Bip39WordsNum.WORDS_NUM_24)
# Or it can be a string
mnemonic = "branka dorost klam slanina omezit cuketa kazeta cizost rozchod tvaroh majetek kyvadlo"

# Generate with automatic language detection and passphrase (empty)
seed_bytes = Bip39SeedGenerator(mnemonic).Generate()
# Generate with automatic language detection and custom passphrase
seed_bytes = Bip39SeedGenerator(mnemonic).Generate("my_passphrase")
# Generate specifying the language
seed_bytes = Bip39SeedGenerator(mnemonic, Bip39Languages.CZECH).Generate()

Substrate seed generation

Polkadot introduced a variant for generating seed, which computes the seed directly from the mnemonic entropy instead of the mnemonic string.
Reference: Substrate seed generation
For this purpose, the class SubstrateBip39SeedGenerator can be used, which has the same usage of Bip39SeedGenerator.
The seed can be used to construct a Substrate class using the Substrate.FromSeed method.

from bip_utils import Bip39Languages, Bip39WordsNum, Bip39MnemonicGenerator, SubstrateBip39SeedGenerator

# Mnemonic can be generated with Bip39MnemonicGenerator
mnemonic = Bip39MnemonicGenerator().FromWordsNumber(Bip39WordsNum.WORDS_NUM_12)
# Or it can be a string
mnemonic = "branka dorost klam slanina omezit cuketa kazeta cizost rozchod tvaroh majetek kyvadlo"

# Generate with automatic language detection and passphrase (empty)
seed_bytes = SubstrateBip39SeedGenerator(mnemonic).Generate()
# Generate with automatic language detection and custom passphrase
seed_bytes = SubstrateBip39SeedGenerator(mnemonic).Generate("my_passphrase")
# Generate specifying the language
seed_bytes = SubstrateBip39SeedGenerator(mnemonic, Bip39Languages.CZECH).Generate()

Please note that this is not used by all wallets supporting Polkadot. For example, TrustWallet or Ledger still use the standard BIP39 seed generation for Polkadot.

Monero mnemonic library

If you use the official Monero wallet, you'll probably notice that Monero generates mnemonic in its own way, which is different from BIP-0039.
In fact, it uses different words lists (with 1626 words instead of 2048) and a different algorithm for encoding/decoding the mnemonic string.

The functionalities of this library are the same of the BIP-0039 one but with Monero-style mnemonics:

Generate mnemonics from words number or entropy bytes
Validate a mnemonic
Get back the entropy bytes from a mnemonic
Generate the seed from a mnemonic

Mnemonic generation

A mnemonic phrase can be generated by specifying the words number (in this case a random entropy will be used) or directly by the entropy bytes.

Supported words number:

Words number	Enum	Description
12	MoneroWordsNum.WORDS_NUM_12	No checksum
13	MoneroWordsNum.WORDS_NUM_13	Like before with checksum
24	MoneroWordsNum.WORDS_NUM_24	No checksum
25	MoneroWordsNum.WORDS_NUM_25	Like before with checksum

Now, Monero wallets use 25 words (24 is exactly same but without the last checksum word).
The 12/13 words mnemonic was an old format used by MyMonero. It's supported only for compatibility but it's not suggested to use mnemonics with those lengths.

Supported entropy bits:

Entropy bits	Enum
128	MoneroEntropyBitLen.BIT_LEN_128
256	MoneroEntropyBitLen.BIT_LEN_256

Supported languages:

Language	Enum
Chinese (simplified)	MoneroLanguages.CHINESE_SIMPLIFIED
Dutch	MoneroLanguages.DUTCH
English	MoneroLanguages.ENGLISH
French	MoneroLanguages.FRENCH
German	MoneroLanguages.GERMAN
Italian	MoneroLanguages.ITALIAN
Japanese	MoneroLanguages.JAPANESE
Portuguese	MoneroLanguages.PORTUGUESE
Spanish	MoneroLanguages.SPANISH
Russian	MoneroLanguages.RUSSIAN

Code example

import binascii
from bip_utils import MoneroEntropyBitLen, MoneroEntropyGenerator, MoneroMnemonicGenerator, MoneroWordsNum, MoneroLanguages

# Generate a random mnemonic string of 25 words with default language (English)
# A Mnemonic object will be returned
mnemonic = MoneroMnemonicGenerator().FromWordsNumber(MoneroWordsNum.WORDS_NUM_25)

# Get words count
print(mnemonic.WordsCount())
# Get as string
print(mnemonic.ToStr())
print(str(mnemonic))
# Get as list of strings
print(mnemonic.ToList())

# Generate a random mnemonic string of 13 words by specifying the language
mnemonic = MoneroMnemonicGenerator(MoneroLanguages.ITALIAN).FromWordsNumber(MoneroWordsNum.WORDS_NUM_13)

# Generate the mnemonic string from entropy bytes
entropy_bytes = binascii.unhexlify(b"00000000000000000000000000000000")
mnemonic = MoneroMnemonicGenerator().FromEntropyNoChecksum(entropy_bytes)
mnemonic = MoneroMnemonicGenerator(MoneroLanguages.FRENCH).FromEntropyWithChecksum(entropy_bytes)

# Generate mnemonic from random 256-bit entropy (with and without checksum)
entropy_bytes = MoneroEntropyGenerator(MoneroEntropyBitLen.BIT_LEN_256).Generate()
mnemonic = MoneroMnemonicGenerator().FromEntropyNoChecksum(entropy_bytes)
mnemonic = MoneroMnemonicGenerator().FromEntropyWithChecksum(entropy_bytes)

Mnemonic validation

A mnemonic string can be validated by verifying its language and checksum (if present). Moreover, it is also possible to get back the entropy bytes from a mnemonic.
When validating, the language can be either specified or automatically detected.
Automatic detection takes more time, so if the mnemonic language is known in advance it'll be better to specify it at construction.

Code example

from bip_utils import (
    MoneroChecksumError, MoneroLanguages, MoneroWordsNum, MoneroMnemonicGenerator, MoneroMnemonicValidator, MoneroMnemonicDecoder
)

# Mnemonic can be generated with MoneroMnemonicGenerator
mnemonic = MoneroMnemonicGenerator().FromWordsNumber(MoneroWordsNum.WORDS_NUM_25)
# Or it can be a string
mnemonic = "calamity atlas buzzer tyrant natural bumper taboo nozzle puck obtains acoustic aphid decay jittery evicted cuddled love educated koala puddle tarnished necklace anvil axis calamity"

# Get if a mnemonic is valid, return bool
is_valid = MoneroMnemonicValidator().IsValid(mnemonic)
# Validate a mnemonic, raise exceptions
try:
    MoneroMnemonicValidator().Validate(mnemonic)
    # Valid...
except MoneroChecksumError:
    # Invalid checksum...
    pass
except ValueError:
    # Invalid length or language...
    pass

# Use MoneroMnemonicDecoder to get back the entropy bytes from a mnemonic, specifying the language
entropy_bytes = MoneroMnemonicDecoder(MoneroLanguages.ENGLISH).Decode(mnemonic)
# Like before with automatic language detection
entropy_bytes = MoneroMnemonicDecoder().Decode(mnemonic)

Seed generation

A seed is generated from a mnemonic and can be used to construct a Monero class using the Monero.FromSeed method.
Please note that it's not possible to use a passphrase like BIP-0039.
Also in this case, the language can be specified or automatically detected.

Code example

from bip_utils import MoneroLanguages, MoneroWordsNum, MoneroMnemonicGenerator, MoneroSeedGenerator

# Mnemonic can be generated with MoneroMnemonicGenerator
mnemonic = MoneroMnemonicGenerator().FromWordsNumber(MoneroWordsNum.WORDS_NUM_25)
# Or it can be a string
mnemonic = "fianza dedo mosca bufón bello amable amigo lamer narrar elixir mejilla peine libertad payaso orgullo obtener ganga morder editor orilla gen ocre abuelo anemia editor"

# Generate with automatic language detection and passphrase (empty)
seed_bytes = MoneroSeedGenerator(mnemonic).Generate()
# Generate specifying the language
seed_bytes = MoneroSeedGenerator(mnemonic, MoneroLanguages.SPANISH).Generate()

BIP-0032 library

The BIP-0032 library allows deriving children keys as defined by BIP-0032 and SLIP-0010.

Since this library is wrapped inside the BIP-0044, BIP-0049 and BIP-0084 libraries, there is no need to use it alone unless you need to derive some non-standard paths.
The library currently supports the following elliptic curves for key derivation, each one is implemented by a specific class:

Ed25519 (based on SLIP-0010): Bip32Ed25519Slip class
Ed25519-Blake2b (based on SLIP-0010): Bip32Ed25519Blake2bSlip class
Nist256p1 (based on SLIP-0010): Bip32Nist256p1 class
Secp256k1: Bip32Secp256k1 class

They all inherit from the generic Bip32Base class, which can be extended to implement new elliptic curves derivation.
The curve depends on the specific coin and it's automatically selected if you use the Bip44 library.

Construction from seed

The class can be constructed from a seed. The seed can be specified manually or generated by Bip39SeedGenerator.
The constructed class is the master path, so printing the private key will result in printing the master key.

Code example

import binascii
from bip_utils import Bip39SeedGenerator, Bip32Secp256k1

# Generate from mnemonic
mnemonic = "abandon abandon abandon abandon abandon abandon abandon abandon abandon abandon abandon about"
seed_bytes = Bip39SeedGenerator(mnemonic).Generate()
# Specify seed manually
seed_bytes = binascii.unhexlify(b"5eb00bbddcf069084889a8ab9155568165f5c453ccb85e70811aaed6f6da5fc19a5ac40b389cd370d086206dec8aa6c43daea6690f20ad3d8d48b2d2ce9e38e4")

# Construct from seed. In case it's a test net, pass True as second parameter. Derivation path returned: m
bip32_ctx = Bip32Secp256k1.FromSeed(seed_bytes)
# Print master key in extended format
print(bip32_ctx.PrivateKey().ToExtended())

In addition to a seed, it's also possible to specify a derivation path.

Code example

import binascii
from bip_utils import Bip32Secp256k1

# Derivation path returned: m/0'/1'/2
seed_bytes = binascii.unhexlify(b"5eb00bbddcf069084889a8ab9155568165f5c453ccb85e70811aaed6f6da5fc19a5ac40b389cd370d086206dec8aa6c43daea6690f20ad3d8d48b2d2ce9e38e4")
bip32_ctx = Bip32Secp256k1.FromSeedAndPath(seed_bytes, "m/0'/1'/2")
# Print private key for derivation path m/0'/1'/2 in extended format
print(bip32_ctx.PrivateKey().ToExtended())

Construction from extended key

The class can be constructed directly from an extended key.
The returned object will be at the same depth of the specified key.

Code example

from bip_utils import Bip32Secp256k1

# Private extended key from derivation path m/0'/1 (depth 2)
key_str = "xprv9wTYmMFdV23N2TdNG573QoEsfRrWKQgWeibmLntzniatZvR9BmLnvSxqu53Kw1UmYPxLgboyZQaXwTCg8MSY3H2EU4pWcQDnRnrVA1xe8fs"
# Construct from key (return object has depth 2)
bip32_ctx = Bip32Secp256k1.FromExtendedKey(key_str)
# Return false
print(bip32_ctx.IsPublicOnly())
# Print keys
print(bip32_ctx.PrivateKey().ToExtended())
print(bip32_ctx.PublicKey().ToExtended())

# Public extended key from derivation path m/0'/1 (depth 2)
key_str = "xpub6ASuArnXKPbfEwhqN6e3mwBcDTgzisQN1wXN9BJcM47sSikHjJf3UFHKkNAWbWMiGj7Wf5uMash7SyYq527Hqck2AxYysAA7xmALppuCkwQ"
# Construct from key (return object has depth 2)
# The object will be public-only and support only public derivation
bip32_ctx = Bip32Secp256k1.FromExtendedKey(key_str)
# Return true
print(bip32_ctx.IsPublicOnly())
# Print public key
print(bip32_ctx.PublicKey().ToExtended())

Construction from private key

The class can be constructed directly from a private key. The key will be considered a master key since there is no way to recover the key derivation data from the key bytes.
Therefore, the returned object will have a depth equal to zero, a zero chain code and parent fingerprint.

Code example

import binascii
from bip_utils import Bip32Secp256k1, Secp256k1PrivateKey

# Construct from private key bytes
priv_key_bytes = binascii.unhexlify(b"e8f32e723decf4051aefac8e2c93c9c5b214313817cdb01a1494b917c8436b35")
bip32_ctx = Bip32Secp256k1.FromPrivateKey(priv_key_bytes)
# Or key object directly (the curve shall match the one of the Bip32 class, otherwise a Bip32KeyError will be raised)
bip32_ctx = Bip32Secp256k1.FromPrivateKey(Secp256k1PrivateKey.FromBytes(priv_key_bytes))
# Print keys and data
print(bip32_ctx.PrivateKey().Raw().ToHex())
print(bip32_ctx.PublicKey().RawCompressed().ToHex())
print(bip32_ctx.Depth().ToInt())
print(bip32_ctx.ChainCode().ToBytes())
print(bip32_ctx.ParentFingerPrint().ToBytes())

Construction from public key

The class can be constructed directly from a public key. The key will be considered a master key since there is no way to recover the key derivation data from the key bytes.
Therefore, the returned object will have a depth equal to zero, a zero chain code and parent fingerprint.
The constructed class will be a public-only object (see the example in the next paragraph), so it won't support hardened derivation.

Code example

import binascii
from bip_utils import Bip32KeyError, Bip32Secp256k1, Secp256k1PublicKey

# Construct from public key bytes
pub_key_bytes = binascii.unhexlify(b"0339a36013301597daef41fbe593a02cc513d0b55527ec2df1050e2e8ff49c85c2")
bip32_ctx = Bip32Secp256k1.FromPublicKey(pub_key_bytes)
# Or key object directly (the curve shall match the one of the Bip32 class, otherwise a Bip32KeyError will be raised)
bip32_ctx = Bip32Secp256k1.FromPublicKey(Secp256k1PublicKey.FromBytes(pub_key_bytes))
# Print keys and data
print(bip32_ctx.PublicKey().RawCompressed().ToHex())
print(bip32_ctx.Depth().ToInt())
print(bip32_ctx.ChainCode().ToBytes())
print(bip32_ctx.ParentFingerPrint().ToBytes())

# Return true
print(bip32_ctx.IsPublicOnly())
# Getting the private key will raise a Bip32KeyError
try:
    print(bip32_ctx.PrivateKey().Raw().ToHex())
except Bip32KeyError as ex:
    print(ex)

Keys derivation

Each time a key is derived, a new instance of the class is returned. This allows to chain the methods call or save a specific key pair for future derivation.
The Bip32Utils.HardenIndex method can be used to make an index hardened.

Code example

import binascii
from bip_utils import Bip32Secp256k1, Bip32Utils

# Seed bytes
seed_bytes = binascii.unhexlify(b"5eb00bbddcf069084889a8ab9155568165f5c453ccb85e70811aaed6f6da5fc19a5ac40b389cd370d086206dec8aa6c43daea6690f20ad3d8d48b2d2ce9e38e4")
# Path: m
bip32_ctx = Bip32Secp256k1.FromSeed(seed_bytes)
# Derivation path: m/0'/1'/2/3
bip32_ctx = bip32_ctx.ChildKey(Bip32Utils.HardenIndex(0)) \
                     .ChildKey(Bip32Utils.HardenIndex(1)) \
                     .ChildKey(2)                         \
                     .ChildKey(3)
# Print keys in extended format
print(bip32_ctx.PrivateKey().ToExtended())
print(bip32_ctx.PublicKey().ToExtended())

# Print keys bytes
print(bip32_ctx.PrivateKey().Raw().ToBytes())
print(bytes(bip32_ctx.PrivateKey().Raw()))
print(bip32_ctx.PublicKey().RawCompressed().ToBytes())
print(bytes(bip32_ctx.PublicKey().RawCompressed()))
print(bip32_ctx.PublicKey().RawUncompressed().ToBytes())
print(bytes(bip32_ctx.PublicKey().RawUncompressed()))

# Print keys in hex format
print(bip32_ctx.PrivateKey().Raw().ToHex())
print(str(bip32_ctx.PrivateKey().Raw()))
print(bip32_ctx.PublicKey().RawCompressed().ToHex())
print(str(bip32_ctx.PublicKey().RawCompressed()))
print(bip32_ctx.PublicKey().RawUncompressed().ToHex())
print(str(bip32_ctx.PublicKey().RawUncompressed()))

# Print other BIP32 data
print(bip32_ctx.Index().IsHardened())
print(bip32_ctx.Index().ToInt())
print(int(bip32_ctx.Index()))
print(bip32_ctx.Index().ToBytes())
print(bytes(bip32_ctx.Index()))

print(bip32_ctx.Depth().ToInt())
print(int(bip32_ctx.Depth()))
print(bip32_ctx.Depth().ToBytes())
print(bytes(bip32_ctx.Depth()))

print(bip32_ctx.ChainCode().ToHex())
print(str(bip32_ctx.ChainCode()))
print(bip32_ctx.ChainCode().ToBytes())
print(bytes(bip32_ctx.ChainCode()))

print(bip32_ctx.FingerPrint().IsMasterKey())
print(str(bip32_ctx.FingerPrint()))
print(bip32_ctx.FingerPrint().ToBytes())
print(bytes(bip32_ctx.FingerPrint()))

print(bip32_ctx.ParentFingerPrint().IsMasterKey())
print(bip32_ctx.ParentFingerPrint().ToBytes())
print(bytes(bip32_ctx.ParentFingerPrint()))

# Alternative: use DerivePath method
bip32_ctx = Bip32Secp256k1.FromSeed(seed_bytes)
bip32_ctx = bip32_ctx.DerivePath("0'/1'/2/3")

# DerivePath derives from the current depth, so it can be split
bip32_ctx = Bip32Secp256k1.FromSeed(seed_bytes)
bip32_ctx = bip32_ctx.DerivePath("0'/1'")   # Derivation path: m/0'/1'
bip32_ctx = bip32_ctx.DerivePath("2/3")     # Derivation path: m/0'/1'/2/3

It's also possible to use public derivation (i.e. "watch-only" addresses) by:

converting a private object to a public-only using ConvertToPublic method
constructing a public-only object from a public key

In case of a public-only object, only public derivation will be supported (only not-hardened indexes), otherwise a Bip32KeyError exception will be raised.

Code example

from bip_utils import Bip32KeyError, Bip32Utils, Bip32Secp256k1

# Derive from a public extended key
key_str = "xpub6ASuArnXKPbfEwhqN6e3mwBcDTgzisQN1wXN9BJcM47sSikHjJf3UFHKkNAWbWMiGj7Wf5uMash7SyYq527Hqck2AxYysAA7xmALppuCkwQ"
bip32_ctx = Bip32Secp256k1.FromExtendedKey(key_str)

# Return true
print(bip32_ctx.IsPublicOnly())
# Print public key
print(bip32_ctx.PublicKey().RawCompressed().ToHex())

# Public derivation is used to derive a child key
bip32_ctx = bip32_ctx.ChildKey(0)
bip32_ctx = bip32_ctx.DerivePath("1/2")
# Print key
print(bip32_ctx.PublicKey().RawCompressed().ToHex())

# Getting the private key will raise a Bip32KeyError
try:
    print(bip32_ctx.PrivateKey().Raw().ToHex())
except Bip32KeyError as ex:
    print(ex)

# Deriving with hardened indexes will raise a Bip32KeyError
try:
    bip32_ctx = bip32_ctx.ChildKey(Bip32Utils.HardenIndex(0))
    bip32_ctx = bip32_ctx.DerivePath("1'/2")
except Bip32KeyError as ex:
    print(ex)

# Derive from a private extended key
key_str = "xprv9wTYmMFdV23N2TdNG573QoEsfRrWKQgWeibmLntzniatZvR9BmLnvSxqu53Kw1UmYPxLgboyZQaXwTCg8MSY3H2EU4pWcQDnRnrVA1xe8fs"
bip32_ctx = Bip32Secp256k1.FromExtendedKey(key_str)
# Convert to public object
bip32_ctx.ConvertToPublic()
# Same as before...

The other BIP32 classes work exactly in the same way.
However, the Bip32Ed25519Slip and Bip32Ed25519Blake2bSlip classes have some differences (as written in SLIP-0010):

Not-hardened private key derivation is not supported
Public key derivation is not supported

For example:

import binascii
from bip_utils import Bip32KeyError, Bip32Ed25519Slip, Bip32Ed25519Blake2bSlip

# Seed bytes
seed_bytes = binascii.unhexlify(b"5eb00bbddcf069084889a8ab9155568165f5c453ccb85e70811aaed6f6da5fc19a5ac40b389cd370d086206dec8aa6c43daea6690f20ad3d8d48b2d2ce9e38e4")
# Only hardened private key derivation, fine
bip32_ctx = Bip32Ed25519Slip.FromSeedAndPath(seed_bytes, "m/0'/1'")

# Public derivation, Bip32KeyError is raised
try:
    bip32_ctx = Bip32Ed25519Slip.FromSeedAndPath(seed_bytes, "m/0'/1'")
    bip32_ctx.ConvertToPublic()
    bip32_ctx.ChildKey(0)
except Bip32KeyError as ex:
    print(ex)

# Same as before
try:
    bip32_ctx = Bip32Ed25519Blake2bSlip.FromSeedAndPath(seed_bytes, "m/0'/1'")
    bip32_ctx.ConvertToPublic()
    bip32_ctx.ChildKey(0)
except Bip32KeyError as ex:
    print(ex)

# Not-hardened private key derivation, Bip32KeyError is raised
try:
    bip32_ctx = Bip32Ed25519Slip.FromSeedAndPath(seed_bytes, "m/0/1")
    bip32_ctx = Bip32Ed25519Blake2bSlip.FromSeedAndPath(seed_bytes, "m/0/1")
except Bip32KeyError as ex:
    print(ex)

Parse path

The Bip32 module allows also to parse derivation paths.

Code example

from bip_utils import Bip32Path, Bip32PathParser, Bip32Utils

# Parse path, Bip32PathError is raised in case of errors
path = Bip32PathParser.Parse("0'/1'/2")
# 'p' can be used as an alternative character instead of '
path = Bip32PathParser.Parse("0p/1p/2")
# "m" can be added at the beginning
path = Bip32PathParser.Parse("m/0'/1'/2")
# Or construct directly from a list of indexes
path = Bip32Path([0, 1, Bip32Utils.HardenIndex(2)])

# Get length
print(path.Length())
# Get as string
print(path.ToStr())
print(str(path))
# Print elements info and value
for elem in path:
    print(elem.IsHardened())
    print(elem.ToBytes())
    print(bytes(elem))
    print(elem.ToInt())
    print(int(elem))
# Get as list of integers
path_list = path.ToList()
for elem in path_list:
    print(elem)

BIP-0044, BIP-0049, BIP-0084 libraries

The BIP-0044, BIP-0049 and BIP-0084 libraries allows deriving a hierarchy of keys as defined by BIP-0044, BIP-0049 and BIP-0084.

They internally use the BIP-0032 classes for keys derivation, selecting the correct one depending on the elliptic curve of the specific coin.

Coin types

BIP-0044

Supported coins enumerative for BIP-0044:

Coin	Main net enum	Test net enum
Algorand	Bip44Coins.ALGORAND	-
Avalanche C-Chain	Bip44Coins.AVAX_C_CHAIN	-
Avalanche P-Chain	Bip44Coins.AVAX_P_CHAIN	-
Avalanche X-Chain	Bip44Coins.AVAX_X_CHAIN	-
Band Protocol	Bip44Coins.BAND_PROTOCOL	-
Binance Chain	Bip44Coins.BINANCE_CHAIN	-
Binance Smart Chain	Bip44Coins.BINANCE_SMART_CHAIN	-
Bitcoin	Bip44Coins.BITCOIN	Bip44Coins.BITCOIN_TESTNET
Bitcoin Cash	Bip44Coins.BITCOIN_CASH	Bip44Coins.BITCOIN_CASH_TESTNET
Bitcoin Cash SLP	Bip44Coins.BITCOIN_CASH_SLP	Bip44Coins.BITCOIN_CASH_SLP_TESTNET
BitcoinSV	Bip44Coins.BITCOIN_SV	Bip44Coins.BITCOIN_SV_TESTNET
Celo	Bip44Coins.CELO	-
Cosmos	Bip44Coins.COSMOS	-
Dash	Bip44Coins.DASH	Bip44Coins.DASH_TESTNET
Dogecoin	Bip44Coins.DOGECOIN	Bip44Coins.DOGECOIN_TESTNET
eCash	Bip44Coins.ECASH	Bip44Coins.ECASH_TESTNET
Elrond	Bip44Coins.ELROND	-
EOS	Bip44Coins.EOS	-
Ethereum	Bip44Coins.ETHEREUM	-
Ethereum Classic	Bip44Coins.ETHEREUM_CLASSIC	-
Fantom Opera	Bip44Coins.FANTOM_OPERA	-
Filecoin	Bip44Coins.FILECOIN	-
Harmony One (Cosmos address)	Bip44Coins.HARMONY_ONE_ATOM	-
Harmony One (Ethereum address)	Bip44Coins.HARMONY_ONE_ETH	-
Harmony One (Metamask address)	Bip44Coins.HARMONY_ONE_METAMASK	-
Huobi Chain	Bip44Coins.HUOBI_CHAIN	-
IRIS Network	Bip44Coins.IRIS_NET	-
Kava	Bip44Coins.KAVA	-
Kusama (ed25519 SLIP-0010)	Bip44Coins.KUSAMA_ED25519_SLIP	-
Litecoin	Bip44Coins.LITECOIN	Bip44Coins.LITECOIN_TESTNET
Monero (ed25519 SLIP-0010, please see the Monero paragraph below)	Bip44Coins.MONERO_ED25519_SLIP	-
Monero (secp256k1, please see the Monero paragraph below)	Bip44Coins.MONERO_SECP256K1	-
Nano	Bip44Coins.NANO	-
NEO	Bip44Coins.NEO	-
OKEx Chain (Cosmos address)	Bip44Coins.OKEX_CHAIN_ATOM	-
OKEx Chain (Ethereum address)	Bip44Coins.OKEX_CHAIN_ETH	-
OKEx Chain (Old Cosmos address before mainnet upgrade)	Bip44Coins.OKEX_CHAIN_ATOM_OLD	-
Ontology	Bip44Coins.ONTOLOGY	-
Osmosis	Bip44Coins.OSMOSIS	-
Polkadot (ed25519 SLIP-0010)	Bip44Coins.POLKADOT_ED25519_SLIP	-
Polygon	Bip44Coins.POLYGON	-
Ripple	Bip44Coins.RIPPLE	-
Secret Network (old path)	Bip44Coins.SECRET_NETWORK_OLD	-
Secret Network (new path)	Bip44Coins.SECRET_NETWORK_NEW	-
Solana	Bip44Coins.SOLANA	-
Stellar	Bip44Coins.STELLAR	-
Terra	Bip44Coins.TERRA	-
Tezos	Bip44Coins.TEZOS	-
Theta Network	Bip44Coins.THETA	-
Tron	Bip44Coins.TRON	-
VeChain	Bip44Coins.VECHAIN	-
Verge	Bip44Coins.VERGE	-
Zcash	Bip44Coins.ZCASH	Bip44Coins.ZCASH_TESTNET
Zilliqa	Bip44Coins.ZILLIQA	-

The code is structured so that it can be easily extended with other coins if needed (provided that the coin elliptic curve is supported).

NOTES

Bip44Coins.HARMONY_ONE_ETH generates the address using the Harmony One coin index (i.e. 1023). This is the behavior of the official Harmony One wallet and the Ethereum address that you get in the Harmony One explorer.
However, if you just add the Harmony One network in Metamask, Metamask will use the Ethereum coin index (i.e. 60) thus resulting in a different address. Therefore, if you need to generate the Harmony One address for Metamask, use Bip44Coins.HARMONY_ONE_METAMASK.
Bip44Coins.OKEX_CHAIN_ETH and Bip44Coins.OKEX_CHAIN_ATOM generate the address using the Ethereum coin index (i.e. 60). These formats are the ones used by the OKEx wallet. Bip44Coins.OKEX_CHAIN_ETH is compatible with Metamask.
Bip44Coins.OKEX_CHAIN_ATOM_OLD generates the address using the OKEx Chain coin index (i.e. 996). This address format was used before the mainnet upgrade (some wallets still use it, e.g. Cosmostation).

BIP-0049

Supported coins enumerative for BIP-0049:

Coin	Main net enum	Test net enum
Bitcoin	Bip49Coins.BITCOIN	Bip49Coins.BITCOIN_TESTNET
Bitcoin Cash	Bip49Coins.BITCOIN_CASH	Bip49Coins.BITCOIN_CASH_TESTNET
Bitcoin Cash SLP	Bip49Coins.BITCOIN_CASH_SLP	Bip49Coins.BITCOIN_CASH_SLP_TESTNET
BitcoinSV	Bip49Coins.BITCOIN_SV	Bip49Coins.BITCOIN_SV_TESTNET
Dash	Bip49Coins.DASH	Bip49Coins.DASH_TESTNET
Dogecoin	Bip49Coins.DOGECOIN	Bip49Coins.DOGECOIN_TESTNET
eCash	Bip49Coins.ECASH	Bip49Coins.ECASH_TESTNET
Litecoin	Bip49Coins.LITECOIN	Bip49Coins.LITECOIN_TESTNET
Zcash	Bip49Coins.ZCASH	Bip49Coins.ZCASH_TESTNET

BIP-0084

Supported coins enumerative for BIP-0084:

Coin	Main net enum	Test net enum
Bitcoin	Bip84Coins.BITCOIN	Bip84Coins.BITCOIN_TESTNET
Litecoin	Bip84Coins.LITECOIN	Bip84Coins.LITECOIN_TESTNET

Construction from seed

A Bip class can be constructed from a seed, like Bip32. The seed can be specified manually or generated by Bip39SeedGenerator.

Code example

import binascii
from bip_utils import Bip39SeedGenerator, Bip44Coins, Bip44

# Generate from mnemonic
mnemonic = "abandon abandon abandon abandon abandon abandon abandon abandon abandon abandon abandon about"
seed_bytes = Bip39SeedGenerator(mnemonic).Generate()
# Specify seed manually
seed_bytes = binascii.unhexlify(b"5eb00bbddcf069084889a8ab9155568165f5c453ccb85e70811aaed6f6da5fc19a5ac40b389cd370d086206dec8aa6c43daea6690f20ad3d8d48b2d2ce9e38e4")
# Derivation path returned: m
bip44_mst_ctx = Bip44.FromSeed(seed_bytes, Bip44Coins.BITCOIN)

Construction from extended key

A Bip class can be constructed directly from an extended key.
The returned Bip object will be at the same depth of the specified key. If the depth of the key is not valid, a Bip44DepthError exception will be raised.

Code example

from bip_utils import Bip44Coins, Bip44

# Private extended key
key_str = "xprv9s21ZrQH143K3QTDL4LXw2F7HEK3wJUD2nW2nRk4stbPy6cq3jPPqjiChkVvvNKmPGJxWUtg6LnF5kejMRNNU3TGtRBeJgk33yuGBxrMPHi"
# Construct from extended key
bip44_mst_ctx = Bip44.FromExtendedKey(key_str, Bip44Coins.BITCOIN)

Construction from private key

A Bip class can be constructed directly from a private key. Like Bip32, the key will be considered a master key since there is no way to recover the key derivation data from the key bytes.
Therefore, the returned object will have a depth equal to zero, a zero chain code and parent fingerprint.

Code example

import binascii
from bip_utils import Bip44Coins, Bip44, Secp256k1PrivateKey

# Construct from private key bytes
priv_key_bytes = binascii.unhexlify(b"e8f32e723decf4051aefac8e2c93c9c5b214313817cdb01a1494b917c8436b35")
bip44_mst_ctx = Bip44.FromPrivateKey(priv_key_bytes, Bip44Coins.BITCOIN)
# Or key object directly (the key type shall match the curve used by the coin, otherwise Bip32KeyError will be raised)
bip44_mst_ctx = Bip44.FromPrivateKey(Secp256k1PrivateKey.FromBytes(priv_key_bytes), Bip44Coins.BITCOIN)

Keys derivation

Like Bip32, each time a key is derived a new instance of the Bip class is returned.
The keys must be derived with the levels specified by BIP-0044:

m / purpose' / coin_type' / account' / change / address_index

using the correspondent methods. If keys are derived in the wrong level, a Bip44DepthError will be raised.
The private and public extended keys can be printed at any level.

NOTE: In case not-hardened private derivation is not supported (e.g. in ed25519 SLIP-0010), all indexes will be hardened:

m / purpose' / coin_type' / account' / change' / address_index'

Code example

import binascii
from bip_utils import Bip44Changes, Bip44Coins, Bip44Levels, Bip44

# Seed bytes
seed_bytes = binascii.unhexlify(b"5eb00bbddcf069084889a8ab9155568165f5c453ccb85e70811aaed6f6da5fc19a5ac40b389cd370d086206dec8aa6c43daea6690f20ad3d8d48b2d2ce9e38e4")
# Create from seed
bip44_mst_ctx = Bip44.FromSeed(seed_bytes, Bip44Coins.BITCOIN)

# Print master key in extended format
print(bip44_mst_ctx.PrivateKey().ToExtended())
# Print master key in hex format
print(bip44_mst_ctx.PrivateKey().Raw().ToHex())

# Print public key in extended format
print(bip44_mst_ctx.PublicKey().ToExtended())
# Print public key in raw uncompressed format
print(bip44_mst_ctx.PublicKey().RawUncompressed().ToHex())
# Print public key in raw compressed format
print(bip44_mst_ctx.PublicKey().RawCompressed().ToHex())

# Print the master key in WIF
print(bip44_mst_ctx.IsLevel(Bip44Levels.MASTER))
print(bip44_mst_ctx.PrivateKey().ToWif())

# Derive account 0 for Bitcoin: m/44'/0'/0'
bip44_acc_ctx = bip44_mst_ctx.Purpose().Coin().Account(0)
# Print keys in extended format
print(bip44_acc_ctx.IsLevel(Bip44Levels.ACCOUNT))
print(bip44_acc_ctx.PrivateKey().ToExtended())
print(bip44_acc_ctx.PublicKey().ToExtended())
# Address of account level
print(bip44_acc_ctx.PublicKey().ToAddress())

# Derive the external chain: m/44'/0'/0'/0
bip44_chg_ctx = bip44_acc_ctx.Change(Bip44Changes.CHAIN_EXT)
# Print again keys in extended format
print(bip44_chg_ctx.IsLevel(Bip44Levels.CHANGE))
print(bip44_chg_ctx.PrivateKey().ToExtended())
print(bip44_chg_ctx.PublicKey().ToExtended())
# Address of change level
print(bip44_chg_ctx.PublicKey().ToAddress())

# Derive the first 20 addresses of the external chain: m/44'/0'/0'/0/i
for i in range(20):
    bip44_addr_ctx = bip44_chg_ctx.AddressIndex(i)

    print(bip44_addr_ctx.IsLevel(Bip44Levels.ADDRESS_INDEX))
    # Print extended keys and address
    print(bip44_addr_ctx.PrivateKey().ToExtended())
    print(bip44_addr_ctx.PublicKey().ToExtended())
    print(bip44_addr_ctx.PublicKey().ToAddress())

NOTE: since all the classes derive from the same base class, their usage is the same. Therefore, in all the code examples Bip44 can be substituted by Bip49 or Bip84 without changing the code.

Default derivation paths

Most of the coins (especially the ones using the secp256k1 curve) use the complete BIP-0044 path to derive the address private key:

m / purpose' / coin_type' / account' / change / address_index

However, this doesn't apply all coins. For example, Solana uses the following path to derive the address private key: m/44'/501'/0'
This can be derived manually, for example:

import binascii
from bip_utils import Bip44Coins, Bip44

# Seed bytes
seed_bytes = binascii.unhexlify(b"5eb00bbddcf069084889a8ab9155568165f5c453ccb85e70811aaed6f6da5fc19a5ac40b389cd370d086206dec8aa6c43daea6690f20ad3d8d48b2d2ce9e38e4")

# Derive m/44'/501'/0'
bip44_mst_ctx = Bip44.FromSeed(seed_bytes, Bip44Coins.SOLANA)
bip44_acc_ctx = bip44_mst_ctx.Purpose().Coin().Account(0)
# Default address generated by the wallet (e.g. TrustWallet): m/44'/501'/0'
print(bip44_acc_ctx.PublicKey().ToAddress())

However, in order to avoid remembering the default path for each coin, the DeriveDefaultPath method can be used to automatically derive the default path:

import binascii
from bip_utils import Bip44Coins, Bip44

# Seed bytes
seed_bytes = binascii.unhexlify(b"5eb00bbddcf069084889a8ab9155568165f5c453ccb85e70811aaed6f6da5fc19a5ac40b389cd370d086206dec8aa6c43daea6690f20ad3d8d48b2d2ce9e38e4")

# Automatically derive m/44'/501'/0'
bip44_def_ctx = Bip44.FromSeed(seed_bytes, Bip44Coins.SOLANA).DeriveDefaultPath()
# Same as before
print(bip44_def_ctx.PublicKey().ToAddress())

# Automatically derive m/44'/3'/0'/0/0
bip44_def_ctx = Bip44.FromSeed(seed_bytes, Bip44Coins.DOGECOIN).DeriveDefaultPath()
# Same as before
print(bip44_def_ctx.PublicKey().ToAddress())

Polkadot/Kusama addresses generation

Polkadot and Kusama don't support BIP44, so if you use them through the Bip44 class you're basically "forcing" them to follow it. Therefore, keys and addresses generated in this way will be different from the official Polkadot wallet.
For this, I used the same implementation of TrustWallet, i.e.:

The derivation scheme is based on ed25519 SLIP-0010
The default derivation path is: m/44'/354'/0'/0'/0'

If you want to get the same keys and addresses of the Polkadot-JS wallet, use the Substrate module (see the related paragraph).

Monero addresses generation

Monero works differently from other coins, because it has 2 private keys and 2 public keys (one for spending, one for viewing).
Moreover, it has its own algorithm to generate the so-called "subaddresses", which have nothing to do with the addresses derived at the "address" level in BIP44.
Therefore, Monero shall be treated separately to get keys and addresses by using the Monero module.

Like Polkadot/Kusama in the previous paragraph, Monero doesn't support BIP44 so if you use it through the Bip44 class you're basically "forcing" Monero to follow it.
Since there is no specification that states how to implement Monero using BIP44, I look a little bit around and I created two implementations:

Bip44Coins.MONERO_ED25519_SLIP uses the ed25519 curve (like Monero itself) with the SLIP-0010 derivation scheme and the default derivation path is m/44'/128'/0'/0'/0'
Bip44Coins.MONERO_SECP256K1 uses the secp256k1 curve (like Bitcoin) and the default derivation path is m/44'/128'/0'/0/0 (like the Ledger implementation)

Of course, you are free to derive other paths if you want.
Whatever implementation or path you choose, the Monero private spend key is computed from the Bip44 private key as follows:

perform keccak256 of the key bytes
apply sc_reduce to the result to get a valid Monero private key

Code example

import binascii
from bip_utils import Bip44Coins, Bip44, Monero

# Seed bytes
seed_bytes = binascii.unhexlify(b"5eb00bbddcf069084889a8ab9155568165f5c453ccb85e70811aaed6f6da5fc19a5ac40b389cd370d086206dec8aa6c43daea6690f20ad3d8d48b2d2ce9e38e4")

# Create BIP44 object and derive default path
bip44_def_ctx = Bip44.FromSeed(seed_bytes, Bip44Coins.MONERO_ED25519_SLIP).DeriveDefaultPath()

# Create Monero object from the BIP44 private key -> monero_priv_spend_key = sc_reduce(kekkak256(bip44_priv_key))
monero = Monero.FromBip44PrivateKey(bip44_def_ctx.PrivateKey().Raw().ToBytes())

# Print keys
print(monero.PrivateSpendKey().Raw().ToHex())
print(monero.PrivateViewKey().Raw().ToHex())
print(monero.PublicSpendKey().RawCompressed().ToHex())
print(monero.PublicViewKey().RawCompressed().ToHex())

# Print primary address
print(monero.PrimaryAddress())
# Print subaddresses
print(monero.Subaddress(0))         # Account 0 (default), Subaddress 0 (same as primary address)
print(monero.Subaddress(1))         # Account 0 (default), Subaddress 1
print(monero.Subaddress(0, 1))      # Account 1, Subaddress 0
print(monero.Subaddress(1, 1))      # Account 1, Subaddress 1

If you prefer not to perform the kekkak256 of the key bytes, you can just use the Bip44 private key directly as a Monero seed:

Code example

import binascii
from bip_utils import Bip44Coins, Bip44, Monero

# Seed bytes
seed_bytes = binascii.unhexlify(b"5eb00bbddcf069084889a8ab9155568165f5c453ccb85e70811aaed6f6da5fc19a5ac40b389cd370d086206dec8aa6c43daea6690f20ad3d8d48b2d2ce9e38e4")

# Create BIP44 object and derive default path
bip44_def_ctx = Bip44.FromSeed(seed_bytes, Bip44Coins.MONERO_ED25519_SLIP).DeriveDefaultPath()

# Create Monero object using the BIP44 private key as seed -> monero_priv_spend_key = sc_reduce(bip44_priv_key)
monero = Monero.FromSeed(bip44_def_ctx.PrivateKey().Raw().ToBytes())
# Same as before...

Please note that, if the seed is generated from a Monero mnemonic phrase, you'll get the same keys and addresses of the official Monero wallets.
For the usage of the Monero module alone, see the related paragraph.

Substrate library

The Substrate library allows to derive keys for coins of the Polkadot ecosystem, since they don't follow BIP44.
The module generates the same keys and addresses of Polkadot-JS and uses sr25519 curve for keys derivation.
With respect to BIP-0032, Substrate paths can be also strings (in addition to numbers) and they are identified by a prefix:

"/" for not-hardened (soft) derivation (e.g. "/soft")
"//" for hardened derivation (e.g. "//hard")

Coin types

Supported coins enumerative:

Coin	Enum
Acala	SubstrateCoins.ACALA
Bifrost	SubstrateCoins.BIFROST
Chainx	SubstrateCoins.CHAINX
Edgeware	SubstrateCoins.EDGEWARE
Generic	SubstrateCoins.GENERIC
Karura	SubstrateCoins.KARURA
Kusama	SubstrateCoins.KUSAMA
Moonbeam	SubstrateCoins.MOONBEAM
Moonriver	SubstrateCoins.MOONRIVER
Phala Network	SubstrateCoins.PHALA
Plasm Network	SubstrateCoins.PLASM
Polkadot	SubstrateCoins.POLKADOT
Sora	SubstrateCoins.SORA
Stafi	SubstrateCoins.STAFI

The code is structured so that it can be easily extended with other coins if needed.

Construction from seed

The class can be constructed from a seed, like Bip32. The seed can be specified manually or generated by SubstrateBip39SeedGenerator.

NOTE: If Bip39SeedGenerator is used instead, the wrong addresses will be generated

Code example

import binascii
from bip_utils import SubstrateBip39SeedGenerator, SubstrateCoins, Substrate

# Generate from mnemonic
mnemonic = "abandon abandon abandon abandon abandon abandon abandon abandon abandon abandon abandon about"
seed_bytes = SubstrateBip39SeedGenerator(mnemonic).Generate()
# Specify seed manually. The seed is required to be 32-byte long. If longer, only the first 32-byte will be considered.
seed_bytes = binascii.unhexlify(b"5eb00bbddcf069084889a8ab9155568165f5c453ccb85e70811aaed6f6da5fc1")

# Construction from seed
substrate_ctx = Substrate.FromSeed(seed_bytes, SubstrateCoins.POLKADOT)
# Construction from seed by specifying the path
substrate_ctx = Substrate.FromSeedAndPath(seed_bytes, "//hard/soft", SubstrateCoins.POLKADOT)

Construction from private/public key

The class can be constructed from a private or a public key.

Code example

import binascii
from bip_utils import SubstrateCoins, Substrate, Sr25519PublicKey, Sr25519PrivateKey

# Construction from private key bytes
priv_key_bytes = binascii.unhexlify(b"2ec306fc1c5bc2f0e3a2c7a6ec6014ca4a0823a7d7d42ad5e9d7f376a1c36c0d14a2ddb1ef1df4adba49f3a4d8c0f6205117907265f09a53ccf07a4e8616dfd8")
substrate_ctx = Substrate.FromPrivateKey(priv_key_bytes, SubstrateCoins.POLKADOT)
# Or key object directly
substrate_ctx = Substrate.FromPrivateKey(Sr25519PrivateKey.FromBytes(priv_key_bytes), SubstrateCoins.POLKADOT)
# Return false
print(substrate_ctx.IsPublicOnly())

# Construction from public key bytes
# The object will be public-only and support only public derivation
pub_key_bytes = binascii.unhexlify(b"66933bd1f37070ef87bd1198af3dacceb095237f803f3d32b173e6b425ed7972")
substrate_ctx = Substrate.FromPublicKey(pub_key_bytes, SubstrateCoins.POLKADOT)
# Or key object directly
substrate_ctx = Substrate.FromPublicKey(Sr25519PublicKey.FromBytes(pub_key_bytes), SubstrateCoins.POLKADOT)
# Return true
print(substrate_ctx.IsPublicOnly())

Keys derivation

Like Bip32, each time a key is derived a new instance of the Substrate class is returned.
The usage is similar to Bip32/Bip44 module.

Code example

import binascii
from bip_utils import SubstrateCoins, Substrate

# Seed bytes
seed_bytes = binascii.unhexlify(b"5eb00bbddcf069084889a8ab9155568165f5c453ccb85e70811aaed6f6da5fc1")
# Construction from seed
substrate_ctx = Substrate.FromSeed(seed_bytes, SubstrateCoins.POLKADOT)
# Print master keys and address
print(substrate_ctx.PrivateKey().Raw().ToBytes())
print(bytes(substrate_ctx.PrivateKey().Raw()))
print(substrate_ctx.PrivateKey().Raw().ToHex())
print(substrate_ctx.PublicKey().RawCompressed().ToBytes())
print(bytes(substrate_ctx.PublicKey().RawCompressed()))
print(substrate_ctx.PublicKey().RawCompressed().ToHex())
print(substrate_ctx.PublicKey().ToAddress())

# Derive a child key
substrate_ctx = substrate_ctx.ChildKey("//hard")
# Print derived keys and address
print(substrate_ctx.PrivateKey().Raw().ToHex())
print(substrate_ctx.PublicKey().RawCompressed().ToHex())
print(substrate_ctx.PublicKey().ToAddress())
# Print path
print(substrate_ctx.Path().ToStr())

# Derive a path
substrate_ctx = substrate_ctx.DerivePath("//hard/soft") # Path: //hard/soft
substrate_ctx = substrate_ctx.DerivePath("//0/1")       # Path: //hard/soft//0/1
# Print derived keys and address
print(substrate_ctx.PrivateKey().Raw().ToHex())
print(substrate_ctx.PublicKey().RawCompressed().ToHex())
print(substrate_ctx.PublicKey().ToAddress())
# Print path
print(substrate_ctx.Path().ToStr())

It's also possible to use public derivation (i.e. "watch-only" addresses) by:

converting a private object to a public-only using ConvertToPublic method
constructing a public-only object from a public key

In case of a public-only object, only public derivation will be supported (only "soft" path elements), otherwise a SubstrateKeyError exception will be raised.

Code example

import binascii
from bip_utils import SubstrateKeyError, SubstrateCoins, Substrate

# Construction from public key
pub_key_bytes = b"66933bd1f37070ef87bd1198af3dacceb095237f803f3d32b173e6b425ed7972"
substrate_ctx = Substrate.FromPublicKey(binascii.unhexlify(pub_key_bytes), SubstrateCoins.POLKADOT)
# Return true
print(substrate_ctx.IsPublicOnly())
# Print key and address
print(substrate_ctx.PublicKey().RawCompressed().ToHex())
print(substrate_ctx.PublicKey().ToAddress())

# Public derivation is used to derive a child key
substrate_ctx = substrate_ctx.ChildKey("/soft")
# Print key and address
print(substrate_ctx.PublicKey().RawCompressed().ToHex())
print(substrate_ctx.PublicKey().ToAddress())
# Print path
print(substrate_ctx.Path().ToStr())
# Public derivation is used to derive a path
substrate_ctx = substrate_ctx.DerivePath("/0/1")

# Getting the private key will raise a SubstrateKeyError
try:
    print(substrate_ctx.PrivateKey().Raw().ToHex())
except SubstrateKeyError as ex:
    print(ex)

# Deriving a hard path will raise a SubstrateKeyError
try:
    substrate_ctx = substrate_ctx.ChildKey("//hard")
    substrate_ctx = substrate_ctx.DerivePath("//0/1")
except SubstrateKeyError as ex:
    print(ex)

# Construction from private key
priv_key_bytes = b"2ec306fc1c5bc2f0e3a2c7a6ec6014ca4a0823a7d7d42ad5e9d7f376a1c36c0d14a2ddb1ef1df4adba49f3a4d8c0f6205117907265f09a53ccf07a4e8616dfd8"
substrate_ctx = Substrate.FromPrivateKey(binascii.unhexlify(priv_key_bytes), SubstrateCoins.POLKADOT)
# Convert to public object
substrate_ctx.ConvertToPublic()
# Same as before...

Parse path

The Substrate module allows also to parse derivation paths.
Please note that, if a path contains only numbers (e.g. "//123"), it'll be considered as an integer and not as a string of ASCII characters.

Code example

from bip_utils import SubstratePath, SubstratePathParser

# Parse path, SubstratePathError is raised in case of errors
path = SubstratePathParser.Parse("//hard/soft")
# Or construct directly from a list of indexes
path = SubstratePath(["//hard", "/soft"])

# Get length
print(path.Length())
# Get as string
print(path.ToStr())
print(str(path))
# Print elements info and value
for elem in path:
    print(elem.IsHard())
    print(elem.IsSoft())
    print(elem.ToStr())
    print(str(elem))
    print(elem.ChainCode())
# Get as list of strings
path_list = path.ToList()
for elem in path_list:
    print(elem)

Monero library

The Monero library allows to generate Monero keys, primary address and subaddresses like the official Monero wallets.

Coin types

Supported coins enumerative:

Coin	Enum
Monero main net	MoneroCoins.MONERO_MAINNET
Monero stage net	MoneroCoins.MONERO_STAGENET
Monero test net	MoneroCoins.MONERO_TESTNET

Coin type is passed to all construction methods. The default type is always Monero main net.

Construction from seed

The class can be constructed from a seed, which is usually computed from the Monero mnemonic phrase.
In case of a 24/25 words phrase, the seed corresponds to the private spend key. Otherwise, the private spend key will be the kekkak256 of the seed.

NOTE: Monero mnemonic phrase generation is currently not supported

Code example

import binascii
from bip_utils import MoneroCoins, Monero

# Seed bytes
seed_bytes = binascii.unhexlify(b"851466f170f7d1dd88325d9f6b89328166fa23e3af712e74aa27cb16837ac10d")
# Create from seed (default: Monero main net)
monero = Monero.FromSeed(seed_bytes)
# Return false
print(monero.IsWatchOnly())

# Create from seed for Monero stage net
monero = Monero.FromSeed(seed_bytes, MoneroCoins.MONERO_STAGENET)
# Create from seed for Monero test net
monero = Monero.FromSeed(seed_bytes, MoneroCoins.MONERO_TESTNET)

Construction from private spend key

The class can be constructed directly from the private spend key.

Code example

import binascii
from bip_utils import MoneroCoins, Monero, Ed25519MoneroPrivateKey

# Create from private spend key bytes (default: Monero main net)
key_bytes = binascii.unhexlify(b"2c9623882df4940a734b009e0732ce5a8de7a62c4c1a2a53767a8f6c04874107")
monero = Monero.FromPrivateSpendKey(key_bytes)
# Or key object directly
monero = Monero.FromPrivateSpendKey(Ed25519MoneroPrivateKey.FromBytes(key_bytes))
# Return false
print(monero.IsWatchOnly())

# Create from private spend key bytes for Monero test net
key_bytes = binascii.unhexlify(b"2c9623882df4940a734b009e0732ce5a8de7a62c4c1a2a53767a8f6c04874107")
monero = Monero.FromPrivateSpendKey(key_bytes, MoneroCoins.MONERO_TESTNET)

Construction from Bip44 private key

The class can be constructed from a Bip44 private key. Please refer to the related paragraph in the Bip44 chapter.

Watch-only class

A watch-only class can be constructed from the private view key and the public spend key.

Code example

import binascii
from bip_utils import MoneroKeyError, MoneroCoins, Monero, Ed25519MoneroPrivateKey, Ed25519MoneroPublicKey

# Keys
priv_vkey_bytes = binascii.unhexlify(b"14467d1b9bb8d1fcfb5b7ae08cc9994367e917efd7e08cf94f9882ffa0629e09")
pub_skey_bytes = binascii.unhexlify(b"a95d2eb7e157f0a169df0a9c490dcd8e0feefb31bbf1328ca4938592a9d02422")

# Create from watch-only keys (default: Monero main net)
monero = Monero.FromWatchOnly(priv_vkey_bytes, pub_skey_bytes)
# Or key object directly
monero = Monero.FromWatchOnly(Ed25519MoneroPrivateKey.FromBytes(priv_vkey_bytes),
                              Ed25519MoneroPublicKey.FromBytes(pub_skey_bytes))
# Return true
print(monero.IsWatchOnly())
# Getting the private spend key will raise a MoneroKeyError
try:
    print(monero.PrivateSpendKey().Raw().ToHex())
except MoneroKeyError as ex:
    print(ex)


# Create from watch-only keys for Monero test net
monero = Monero.FromWatchOnly(priv_vkey_bytes, pub_skey_bytes, MoneroCoins.MONERO_TESTNET)

Example of usage

Code example

import binascii
from bip_utils import Monero

# Create from seed bytes
seed_bytes = binascii.unhexlify(b"851466f170f7d1dd88325d9f6b89328166fa23e3af712e74aa27cb16837ac10d")
monero = Monero.FromSeed(seed_bytes)
# Print if watch-only
print(monero.IsWatchOnly())

# Print keys
print(monero.PrivateSpendKey().Raw().ToHex())
print(monero.PrivateSpendKey().Raw().ToBytes())
print(monero.PrivateViewKey().Raw().ToHex())
print(monero.PrivateViewKey().Raw().ToBytes())
print(monero.PublicSpendKey().RawCompressed().ToHex())
print(monero.PublicSpendKey().RawCompressed().ToBytes())
print(monero.PublicViewKey().RawCompressed().ToHex())
print(monero.PublicViewKey().RawCompressed().ToBytes())

# Print primary address
print(monero.PrimaryAddress())
# Print integrated address
payment_id = binascii.unhexlify(b"ccc172c2ffcac9d8")
print(monero.IntegratedAddress(payment_id))
# Print subaddresses
print(monero.Subaddress(0))         # Account 0 (default), Subaddress 0 (same as primary address)
print(monero.Subaddress(1))         # Account 0 (default), Subaddress 1
print(monero.Subaddress(0, 1))      # Account 1, Subaddress 0
print(monero.Subaddress(1, 1))      # Account 1, Subaddress 1

Addresses generation

These libraries are used internally by the other libraries, but they are available also for external use.

Code example

import binascii
from bip_utils import *

#
# Addresses that require a secp256k1 curve
#

# Public key bytes or a public key object can be used
pub_key = binascii.unhexlify(b"022f469a1b5498da2bc2f1e978d1e4af2ce21dd10ae5de64e4081e062f6fc6dca2")
pub_key = Secp256k1PublicKey.FromBytes(binascii.unhexlify(b"022f469a1b5498da2bc2f1e978d1e4af2ce21dd10ae5de64e4081e062f6fc6dca2"))

# P2PKH/P2SH/P2WPKH address with parameters from generic configuration
addr = P2PKHAddr.EncodeKey(pub_key,
                           net_ver=CoinsConf.BitcoinMainNet.Params("p2pkh_net_ver"))
addr = P2SHAddr.EncodeKey(pub_key,
                           net_ver=CoinsConf.BitcoinMainNet.Params("p2sh_net_ver"))
addr = P2WPKHAddr.EncodeKey(pub_key,
                            hrp=CoinsConf.BitcoinMainNet.Params("p2wpkh_hrp"),
                            wit_ver=CoinsConf.BitcoinMainNet.Params("p2wpkh_wit_ver"))
# Or with custom parameters
addr = P2PKHAddr.EncodeKey(pub_key,
                           net_ver=b"\x01")
addr = P2SHAddr.EncodeKey(pub_key,
                           net_ver=b"\x01")
addr = P2WPKHAddr.EncodeKey(pub_key,
                            hrp="hrp",
                            wit_ver=0)
# Or simply with the default parameters from BIP:
addr = P2PKHAddr.EncodeKey(pub_key,
                           **Bip44Conf.BitcoinMainNet.AddrParams())
addr = P2SHAddr.EncodeKey(pub_key,
                           **Bip49Conf.BitcoinMainNet.AddrParams())
addr = P2WPKHAddr.EncodeKey(pub_key,
                            **Bip84Conf.BitcoinMainNet.AddrParams())

# P2PKH/P2SH address in Bitcoin Cash format (net version from configuration)
addr = BchP2PKHAddr.EncodeKey(pub_key,
                              hrp=CoinsConf.BitcoinCashMainNet.Params("p2pkh_std_hrp"),
                              net_ver=CoinsConf.BitcoinCashMainNet.Params("p2pkh_std_net_ver"))
addr = BchP2SHAddr.EncodeKey(pub_key,
                             hrp=CoinsConf.BitcoinCashMainNet.Params("p2pkh_std_hrp"),
                             net_ver=CoinsConf.BitcoinCashMainNet.Params("p2pkh_std_net_ver"))
# Or with custom parameters
addr = BchP2PKHAddr.EncodeKey(pub_key,
                              hrp="hrp",
                              net_ver=b"\x01")
addr = BchP2SHAddr.EncodeKey(pub_key,
                             hrp="hrp",
                             net_ver=b"\x01")
# Or with the default parameters from BIP:
addr = BchP2PKHAddr.EncodeKey(pub_key,
                              **Bip44Conf.BitcoinCashMainNet.AddrParams())
addr = BchP2SHAddr.EncodeKey(pub_key,
                             **Bip49Conf.BitcoinCashMainNet.AddrParams())

# Ethereum address
addr = EthAddr.EncodeKey(pub_key)
# Tron address
addr = TrxAddr.EncodeKey(pub_key)
# AVAX address
addr = AvaxPChainAddr.EncodeKey(pub_key)
addr = AvaxXChainAddr.EncodeKey(pub_key)
# Atom addresses with parameters from generic configuration
addr = AtomAddr.EncodeKey(pub_key,
                          hrp=CoinsConf.Cosmos.Params("addr_hrp"))
addr = AtomAddr.EncodeKey(pub_key,
                          hrp=CoinsConf.BinanceChain.Params("addr_hrp"))
# Or with custom parameters
addr = AtomAddr.EncodeKey(pub_key,
                          hrp="custom")
# Or with the default parameters from BIP:
addr = AtomAddr.EncodeKey(pub_key,
                          **Bip44Conf.Cosmos.AddrParams())
addr = AtomAddr.EncodeKey(pub_key,
                          **Bip44Conf.Kava.AddrParams())
# Filecoin address
addr = FilSecp256k1Addr.EncodeKey(pub_key)
# OKEx Chain address
addr = OkexAddr.EncodeKey(pub_key)
# Harmony One address
addr = OneAddr.EncodeKey(pub_key)
# Ripple address
addr = XrpAddr.EncodeKey(pub_key)
# Zilliqa address
addr = ZilAddr.EncodeKey(pub_key)

#
# Addresses that require a ed25519 curve
#

# Public key bytes or a public key object can be used
pub_key = binascii.unhexlify(b"00dff41688eadfb8574c8fbfeb8707e07ecf571e96e929c395cc506839cc3ef832")
pub_key = Ed25519PublicKey.FromBytes(binascii.unhexlify(b"00dff41688eadfb8574c8fbfeb8707e07ecf571e96e929c395cc506839cc3ef832"))

# Algorand address
addr = AlgoAddr.EncodeKey(pub_key)
# Elrond address
addr = EgldAddr.EncodeKey(pub_key)

# Solana address
addr = SolAddr.EncodeKey(pub_key)

# Stellar address
addr = XlmAddr.EncodeKey(pub_key,
                         addr_type=XlmAddrTypes.PUB_KEY)
addr = XlmAddr.EncodeKey(pub_key,
                         **Bip44Conf.Stellar.AddrParams())

# Substrate address with parameters from generic configuration
addr = SubstrateEd25519Addr.EncodeKey(pub_key,
                                      ss58_format=CoinsConf.Polkadot.Params("addr_ss58_format"))
# Or with custom parameters
addr = SubstrateEd25519Addr.EncodeKey(pub_key,
                                      ss58_format=5)
# Or with the default parameters from BIP/Substrate:
addr = SubstrateEd25519Addr.EncodeKey(pub_key,
                                      **Bip44Conf.PolkadotEd25519Slip.AddrParams())
addr = SubstrateEd25519Addr.EncodeKey(pub_key,
                                      **SubstrateConf.Polkadot.AddrParams())

# Tezos address with custom parameters
addr = XtzAddr.EncodeKey(pub_key,
                         prefix=XtzAddrPrefixes.TZ1)
# Or with the default parameters from BIP:
addr = XtzAddr.EncodeKey(pub_key,
                         **Bip44Conf.Tezos.AddrParams())

#
# Addresses that require a ed25519-blake2b curve
#

# Public key bytes or a public key object can be used
pub_key = binascii.unhexlify(b"00dff41688eadfb8574c8fbfeb8707e07ecf571e96e929c395cc506839cc3ef832")
pub_key = Ed25519Blake2bPublicKey.FromBytes(binascii.unhexlify(b"00dff41688eadfb8574c8fbfeb8707e07ecf571e96e929c395cc506839cc3ef832"))

# Nano address
addr = NanoAddr.EncodeKey(pub_key)

#
# Addresses that require a ed25519-monero curve
#

# Public key bytes or a public key object can be used
pub_skey = binascii.unhexlify(b"a95d2eb7e157f0a169df0a9c490dcd8e0feefb31bbf1328ca4938592a9d02422")
pub_skey = Ed25519MoneroPublicKey.FromBytes(binascii.unhexlify(b"a95d2eb7e157f0a169df0a9c490dcd8e0feefb31bbf1328ca4938592a9d02422"))
pub_vkey = binascii.unhexlify(b"dc2a1b478b8cc0ee655324fb8299c8904f121ab113e4216fbad6fe6d000758f5")
pub_vkey = Ed25519MoneroPublicKey.FromBytes(binascii.unhexlify(b"dc2a1b478b8cc0ee655324fb8299c8904f121ab113e4216fbad6fe6d000758f5"))

# Monero address
addr = XmrAddr.EncodeKey(pub_skey,
                         pub_vkey=pub_vkey,
                         net_ver=CoinsConf.MoneroMainNet.Params("addr_net_ver"))
# Equivalent
addr = XmrAddr.EncodeKey(pub_skey,
                         pub_vkey=pub_vkey,
                         net_ver=MoneroConf.MainNet.AddrNetVersion())

# Monero integrated address
addr = XmrIntegratedAddr.EncodeKey(pub_skey,
                                   pub_vkey=pub_vkey,
                                   net_ver=CoinsConf.MoneroMainNet.Params("addr_int_net_ver"),
                                   payment_id=binascii.unhexlify(b"d7af025ab223b74e"))
# Equivalent
addr = XmrIntegratedAddr.EncodeKey(pub_skey,
                                   pub_vkey=pub_vkey,
                                   net_ver=MoneroConf.MainNet.IntegratedAddrNetVersion(),
                                   payment_id=binascii.unhexlify(b"d7af025ab223b74e"))

#
# Addresses that require a nist256p1 curve
#

# Public key bytes or a public key object can be used
pub_key = binascii.unhexlify(b"038ea003d38b3f2043e681f06f56b3864d28d73b4f243aee90ed04a28dbc058c5b")
pub_key = Nist256p1PublicKey.FromBytes(binascii.unhexlify(b"038ea003d38b3f2043e681f06f56b3864d28d73b4f243aee90ed04a28dbc058c5b"))

# NEO address with parameters from generic configuration
addr = NeoAddr.EncodeKey(pub_key,
                         ver=CoinsConf.Neo.Params("addr_ver"))
# Or with custom parameters
addr = NeoAddr.EncodeKey(pub_key,
                         ver=b"\x10")
# Or with the default parameters from BIP:
addr = NeoAddr.EncodeKey(pub_key,
                         **Bip44Conf.Neo.AddrParams())

#
# Addresses that require a sr25519 curve
#

# Public key bytes or a public key object can be used
pub_key = binascii.unhexlify(b"dff41688eadfb8574c8fbfeb8707e07ecf571e96e929c395cc506839cc3ef832")
pub_key = Sr25519PublicKey.FromBytes(binascii.unhexlify(b"dff41688eadfb8574c8fbfeb8707e07ecf571e96e929c395cc506839cc3ef832"))

# Substrate address (like before)
addr = SubstrateSr25519Addr.EncodeKey(pub_key,
                                      ss58_format=CoinsConf.Kusama.Params("addr_ss58_format"))
addr = SubstrateSr25519Addr.EncodeKey(pub_key,
                                      ss58_format=3)
addr = SubstrateSr25519Addr.EncodeKey(pub_key,
                                      **SubstrateConf.Kusama.AddrParams())

For Bitcoin Cash, it's also possible to convert its addresses by changing the HRP and net version.

Code example

from bip_utils import BchAddrConverter

# Convert address by change the HRP (the old net version is maintained)
conv_addr = BchAddrConverter.Convert("bitcoincash:qp90dvzptg759efdcd93s4dkdw0vuhlkmqlch7letq", "ergon")
# Convert address by change both HRP and net version
conv_addr = BchAddrConverter.Convert("bitcoincash:qp90dvzptg759efdcd93s4dkdw0vuhlkmqlch7letq", "customprefix", b"\x01")

WIF

This library is used internally by the other modules, but it's available also for external use.

Code example

import binascii
from bip_utils import Bip44Conf, CoinsConf, Secp256k1PrivateKey, WifDecoder, WifEncoder

# Private key bytes or a private key object can be used
priv_key = binascii.unhexlify(b'1837c1be8e2995ec11cda2b066151be2cfb48adf9e47b151d46adab3a21cdf67')
priv_key = Secp256k1PrivateKey.FromBytes(binascii.unhexlify(b'1837c1be8e2995ec11cda2b066151be2cfb48adf9e47b151d46adab3a21cdf67'))

# Encode/Decode with default parameters (Bitcoin main net)
enc = WifEncoder.Encode(priv_key)
dec = WifDecoder.Decode(enc)
# Encode/Decode with parameters from configuration
# (MN = main net, TN = test net)
enc = WifEncoder.Encode(priv_key,
                        CoinsConf.BitcoinMainNet.Params("wif_net_ver"))
dec = WifDecoder.Decode(enc,
                        CoinsConf.BitcoinMainNet.Params("wif_net_ver"))
# Encode/Decode with parameters from BIP
enc = WifEncoder.Encode(priv_key,
                        Bip44Conf.BitcoinMainNet.WifNetVersion())
dec = WifDecoder.Decode(enc,
                        Bip44Conf.BitcoinMainNet.WifNetVersion())
# Encode/Decode with custom parameters
enc = WifEncoder.Encode(priv_key,
                        b"\x00")
dec = WifDecoder.Decode(enc,
                        b"\x00")

Base58

This library is used internally by the other modules, but it's available also for external use.
It supports both normal encode/decode and check_encode/check_decode with Bitcoin and Ripple alphabets (if not specified, the Bitcoin one will be used by default):

Alphabet	Enum
Bitcoin	Base58Alphabets.BITCOIN
Ripple	Base58Alphabets.RIPPLE

Code example

import binascii
from bip_utils import Base58Alphabets, Base58Decoder, Base58Encoder, Base58XmrDecoder, Base58XmrEncoder

data_bytes = binascii.unhexlify(b"636363")

# Normal encode
enc = Base58Encoder.Encode(data_bytes)
# Check encode
chk_enc = Base58Encoder.CheckEncode(data_bytes)

# Normal decode
dec = Base58Decoder.Decode(enc)
# Check decode, Base58ChecksumError is raised if checksum verification fails
chk_dec = Base58Decoder.CheckDecode(chk_enc)

# Same as before with Ripple alphabet
enc = Base58Encoder.Encode(data_bytes, Base58Alphabets.RIPPLE)
chk_enc = Base58Encoder.CheckEncode(data_bytes, Base58Alphabets.RIPPLE)
dec = Base58Decoder.Decode(enc, Base58Alphabets.RIPPLE)
chk_dec = Base58Decoder.CheckDecode(chk_enc, Base58Alphabets.RIPPLE)

# Encode/Decode using Monero variation
enc = Base58XmrEncoder.Encode(data_bytes)
dec = Base58XmrDecoder.Decode(enc)

SS58

This library is used internally by the other modules, but it's available also for external use.
It allows encoding/deconding in SS58 format (2-byte checksum).

Code example

import binascii
from bip_utils import SS58Decoder, SS58Encoder

data_bytes = binascii.unhexlify(b"e92b4b43a62fa66293f315486d66a67076e860e2aad76acb8e54f9bb7c925cd9")

# Encode
enc = SS58Encoder.Encode(data_bytes, ss58_format=0)
# Decode
ss58_format, dec = SS58Decoder.Decode(enc)

Bech32

This library is used internally by the other modules, but it's available also for external use.

Code example

import binascii
from bip_utils import (
    Bech32Decoder, Bech32Encoder, BchBech32Encoder, BchBech32Decoder, SegwitBech32Decoder, SegwitBech32Encoder
)

data_bytes = binascii.unhexlify(b'9c90f934ea51fa0f6504177043e0908da6929983')

# Encode with bech32
enc = Bech32Encoder.Encode("cosmos", data_bytes)
# Decode with bech32
dec = Bech32Decoder.Decode("cosmos", enc)

# Encode with segwit bech32
enc = SegwitBech32Encoder.Encode("bc", 0, data_bytes)
# Decode with segwit bech32
wit_ver, wit_prog = SegwitBech32Decoder.Decode("bc", enc)

# Encode with BCH bech32
enc = BchBech32Encoder.Encode("bitcoincash", b"\x00", data_bytes)
# Decode with BCH bech32
net_ver, dec = BchBech32Decoder.Decode("bitcoincash", enc)

Code examples

Some examples from mnemonic generation to wallet addresses.

BIP44

from bip_utils import (
    Bip39WordsNum, Bip39MnemonicGenerator, Bip39SeedGenerator, Bip44Changes, Bip44Coins, Bip44
)

# Generate random mnemonic
mnemonic = Bip39MnemonicGenerator().FromWordsNumber(Bip39WordsNum.WORDS_NUM_24)
print(f"Mnemonic string: {mnemonic}")
# Generate seed from mnemonic
seed_bytes = Bip39SeedGenerator(mnemonic).Generate()

# Construct from seed
bip44_mst_ctx = Bip44.FromSeed(seed_bytes, Bip44Coins.BITCOIN)
# Print master key
print(f"Master key (bytes): {bip44_mst_ctx.PrivateKey().Raw().ToHex()}")
print(f"Master key (extended): {bip44_mst_ctx.PrivateKey().ToExtended()}")
print(f"Master key (WIF): {bip44_mst_ctx.PrivateKey().ToWif()}")

# Generate BIP44 account keys: m/44'/0'/0'
bip44_acc_ctx = bip44_mst_ctx.Purpose().Coin().Account(0)
# Generate BIP44 chain keys: m/44'/0'/0'/0
bip44_chg_ctx = bip44_acc_ctx.Change(Bip44Changes.CHAIN_EXT)

# Generate the first 10 addresses: m/44'/0'/0'/0/i
for i in range(10):
    bip44_addr_ctx = bip44_chg_ctx.AddressIndex(i)
    print(f"{i}. Address public key (extended): {bip44_addr_ctx.PublicKey().ToExtended()}")
    print(f"{i}. Address private key (extended): {bip44_addr_ctx.PrivateKey().ToExtended()}")
    print(f"{i}. Address: {bip44_addr_ctx.PublicKey().ToAddress()}")

BIP49

from bip_utils import (
    Bip39WordsNum, Bip39MnemonicGenerator, Bip39SeedGenerator, Bip44Changes, Bip49Coins, Bip49
)

# Generate random mnemonic
mnemonic = Bip39MnemonicGenerator().FromWordsNumber(Bip39WordsNum.WORDS_NUM_24)
print(f"Mnemonic string: {mnemonic}")
# Generate seed from mnemonic
seed_bytes = Bip39SeedGenerator(mnemonic).Generate()

# Construct from seed
bip49_mst_ctx = Bip49.FromSeed(seed_bytes, Bip49Coins.LITECOIN)
# Print master key
print(f"Master key (bytes): {bip49_mst_ctx.PrivateKey().Raw().ToHex()}")
print(f"Master key (extended): {bip49_mst_ctx.PrivateKey().ToExtended()}")
print(f"Master key (WIF): {bip49_mst_ctx.PrivateKey().ToWif()}")

# Generate BIP49 account keys: m/49'/0'/0'
bip49_acc_ctx = bip49_mst_ctx.Purpose().Coin().Account(0)
# Generate BIP49 chain keys: m/49'/0'/0'/0
bip49_chg_ctx = bip49_acc_ctx.Change(Bip44Changes.CHAIN_EXT)

# Generate the first 10 addresses: m/49'/0'/0'/0/i
for i in range(10):
    bip49_addr_ctx = bip49_chg_ctx.AddressIndex(i)
    print(f"{i}. Address public key (extended): {bip49_addr_ctx.PublicKey().ToExtended()}")
    print(f"{i}. Address private key (extended): {bip49_addr_ctx.PrivateKey().ToExtended()}")
    print(f"{i}. Address: {bip49_addr_ctx.PublicKey().ToAddress()}")

Substrate based on BIP44

from bip_utils import (
    Bip39WordsNum, Bip39MnemonicGenerator, Bip39SeedGenerator, Bip44Coins, Bip44
)

# Generate random mnemonic
mnemonic = Bip39MnemonicGenerator().FromWordsNumber(Bip39WordsNum.WORDS_NUM_24)
print(f"Mnemonic string: {mnemonic}")
# Generate seed from mnemonic
seed_bytes = Bip39SeedGenerator(mnemonic).Generate()

# Construct from seed
bip44_mst_ctx = Bip44.FromSeed(seed_bytes, Bip44Coins.POLKADOT_ED25519_SLIP)
# Print master key
print(f"Master key (bytes): {bip44_mst_ctx.PrivateKey().Raw().ToHex()}")

# Derive default path
bip_obj_def = bip44_mst_ctx.DeriveDefaultPath()
# Print default keys and address
print(f"Default public key (hex): {bip_obj_def.PublicKey().RawCompressed().ToHex()}")
print(f"Default private key (hex): {bip_obj_def.PrivateKey().Raw().ToHex()}")
print(f"Default address: {bip_obj_def.PublicKey().ToAddress()}")

Substrate based on the official Polkadot wallet

from bip_utils import (
    Bip39WordsNum, Bip39MnemonicGenerator, SubstrateBip39SeedGenerator, SubstrateCoins, Substrate
)

# Generate random mnemonic
mnemonic = Bip39MnemonicGenerator().FromWordsNumber(Bip39WordsNum.WORDS_NUM_24)
print(f"Mnemonic string: {mnemonic}")
# Generate seed from mnemonic
seed_bytes = SubstrateBip39SeedGenerator(mnemonic).Generate()

# Construct from seed
substrate_ctx = Substrate.FromSeed(seed_bytes, SubstrateCoins.POLKADOT)
# Print master keys and address
print(f"Master private key (bytes): {substrate_ctx.PrivateKey().Raw().ToHex()}")
print(f"Master public  key (bytes): {substrate_ctx.PublicKey().RawCompressed().ToHex()}")
print(f"Address: {substrate_ctx.PublicKey().ToAddress()}")

# Derive a child key
substrate_ctx = substrate_ctx.ChildKey("//hard")
# Print derived keys and address
print(f"Derived private key (bytes): {substrate_ctx.PrivateKey().Raw().ToHex()}")
print(f"Derived public  key (bytes): {substrate_ctx.PublicKey().RawCompressed().ToHex()}")
print(f"Derived address: {substrate_ctx.PublicKey().ToAddress()}")
# Print path
print(f"Path: {substrate_ctx.Path().ToStr()}")

# Derive a path
substrate_ctx = substrate_ctx.DerivePath("//0/1")
# Print derived keys and address
print(f"Derived private key (bytes): {substrate_ctx.PrivateKey().Raw().ToHex()}")
print(f"Derived public  key (bytes): {substrate_ctx.PublicKey().RawCompressed().ToHex()}")
print(f"Derived address: {substrate_ctx.PublicKey().ToAddress()}")
# Print path
print(f"Path: {substrate_ctx.Path().ToStr()}")

Monero based on BIP44

import binascii
from bip_utils import (
    Bip39WordsNum, Bip39MnemonicGenerator, Bip39SeedGenerator, Bip44Coins, Bip44, Monero
)

# Generate random mnemonic
mnemonic = Bip39MnemonicGenerator().FromWordsNumber(Bip39WordsNum.WORDS_NUM_24)
print(f"Mnemonic string: {mnemonic}")
# Generate seed from mnemonic
seed_bytes = Bip39SeedGenerator(mnemonic).Generate()

# Construct from seed
bip44_mst_ctx = Bip44.FromSeed(seed_bytes, Bip44Coins.MONERO_ED25519_SLIP)
# Print master key
print(f"Master key (bytes): {bip44_mst_ctx.PrivateKey().Raw().ToHex()}")
print(f"Master key (extended): {bip44_mst_ctx.PrivateKey().ToExtended()}")

# Derive default path
bip44_def_ctx = bip44_mst_ctx.DeriveDefaultPath()

# Create Monero object from the BIP44 private key
monero = Monero.FromBip44PrivateKey(bip44_def_ctx.PrivateKey().Raw().ToBytes())

# Print keys
print(f"Monero private spend key: {monero.PrivateSpendKey().Raw().ToHex()}")
print(f"Monero private view key: {monero.PrivateViewKey().Raw().ToHex()}")
print(f"Monero public spend key: {monero.PublicSpendKey().RawCompressed().ToHex()}")
print(f"Monero public view key: {monero.PublicViewKey().RawCompressed().ToHex()}")

# Print primary address
print(f"Monero primary address: {monero.PrimaryAddress()}")
# Print integrated address
payment_id = binascii.unhexlify(b"d6f093554c0daa94")
print(f"Monero integrated address: {monero.IntegratedAddress(payment_id)}")
# Print the first 5 subaddresses for account 0 and 1
for acc_idx in range(2):
    for subaddr_idx in range(5):
        print(f"Subaddress (account: {acc_idx}, index: {subaddr_idx}): {monero.Subaddress(subaddr_idx, acc_idx)}")

Monero based on official Monero wallet

import binascii
from bip_utils import (
    MoneroWordsNum, MoneroMnemonicGenerator, MoneroSeedGenerator, Monero
)

# Generate random mnemonic
mnemonic = MoneroMnemonicGenerator().FromWordsNumber(MoneroWordsNum.WORDS_NUM_25)
print(f"Mnemonic string: {mnemonic}")
# Generate seed from mnemonic
seed_bytes = MoneroSeedGenerator(mnemonic).Generate()

# Construct from seed
monero = Monero.FromSeed(seed_bytes)

# Print keys
print(f"Monero private spend key: {monero.PrivateSpendKey().Raw().ToHex()}")
print(f"Monero private view key: {monero.PrivateViewKey().Raw().ToHex()}")
print(f"Monero public spend key: {monero.PublicSpendKey().RawCompressed().ToHex()}")
print(f"Monero public view key: {monero.PublicViewKey().RawCompressed().ToHex()}")

# Print primary address
print(f"Monero primary address: {monero.PrimaryAddress()}")
# Print integrated address
payment_id = binascii.unhexlify(b"d6f093554c0daa94")
print(f"Monero integrated address: {monero.IntegratedAddress(payment_id)}")
# Print the first 5 subaddresses for account 0 and 1
for acc_idx in range(2):
    for subaddr_idx in range(5):
        print(f"Subaddress (account: {acc_idx}, index: {subaddr_idx}): {monero.Subaddress(subaddr_idx, acc_idx)}")

Buy me a coffee

You know, I'm italian and I love drinking coffee (especially while coding :D). So, if you'd like to buy me one:

BTC: bc1qq4r9cglwzd6f2hzxvdkucmdejvr9h8me5hy0k8
ERC20/BEP20: 0xf84e4898E5E10bf1fBe9ffA3EEC845e82e364b5B

Thank you very much for your support.

License

This software is available under the MIT license.

Name		Name	Last commit message	Last commit date
Latest commit History 948 Commits
benchmark		benchmark
bip_utils		bip_utils
examples		examples
tests		tests
.coveragerc		.coveragerc
.gitignore		.gitignore
.travis.yml		.travis.yml
LICENSE		LICENSE
MANIFEST.in		MANIFEST.in
README.md		README.md
keywords.txt		keywords.txt
mypy.ini		mypy.ini
prospector.yaml		prospector.yaml
requirements.txt		requirements.txt
setup.cfg		setup.cfg
setup.py		setup.py
tox.ini		tox.ini

License

Kora3/bip_utils

Folders and files

Latest commit

History

Repository files navigation

BIP utility library

Introduction

Supported coins

Install the package

BIP-0039 library

Mnemonic generation

Mnemonic validation

Seed generation

Substrate seed generation

Monero mnemonic library

Mnemonic generation

Mnemonic validation

Seed generation

BIP-0032 library

Construction from seed

Construction from extended key

Construction from private key

Construction from public key

Keys derivation

Parse path

BIP-0044, BIP-0049, BIP-0084 libraries

Coin types

BIP-0044

BIP-0049

BIP-0084

Construction from seed

Construction from extended key

Construction from private key

Keys derivation

Default derivation paths

Polkadot/Kusama addresses generation

Monero addresses generation

Substrate library

Coin types

Construction from seed

Construction from private/public key

Keys derivation

Parse path

Monero library

Coin types

Construction from seed

Construction from private spend key

Construction from Bip44 private key

Watch-only class

Example of usage

Addresses generation

WIF

Base58

SS58

Bech32

Code examples

Buy me a coffee

License

About

Resources

License

Stars

Watchers

Forks

Releases

Packages 0

Languages

Packages