Support = in record initialisation

Signed-off-by: Nick Cameron <[email protected]>
KittyCAD · Nov 24, 2024 · dcfff56 · dcfff56
1 parent f760a77
commit dcfff56
Show file tree

Hide file tree

Showing 163 changed files with 5,953 additions and 5,886 deletions.
diff --git a/docs/kcl/abs.md b/docs/kcl/abs.md
@@ -36,9 +36,9 @@ myAngle = -120
 sketch001 = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line([8, 0], %)
-  |> angledLine({ angle: abs(myAngle), length: 5 }, %)
+  |> angledLine({ angle = abs(myAngle), length = 5 }, %)
   |> line([-5, 0], %)
-  |> angledLine({ angle: myAngle, length: 5 }, %)
+  |> angledLine({ angle = myAngle, length = 5 }, %)
   |> close(%)
 
 baseExtrusion = extrude(5, sketch001)

diff --git a/docs/kcl/acos.md b/docs/kcl/acos.md
@@ -34,8 +34,8 @@ acos(num: number) -> number
 sketch001 = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> angledLine({
-       angle: toDegrees(acos(0.5)),
-       length: 10
+       angle = toDegrees(acos(0.5)),
+       length = 10
      }, %)
   |> line([5, 0], %)
   |> lineTo([12, 0], %)

diff --git a/docs/kcl/angleToMatchLengthY.md b/docs/kcl/angleToMatchLengthY.md
@@ -33,8 +33,8 @@ sketch001 = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line([1, 2], %, $seg01)
   |> angledLine({
-       angle: angleToMatchLengthY(seg01, 15, %),
-       length: 5
+       angle = angleToMatchLengthY(seg01, 15, %),
+       length = 5
      }, %)
   |> yLineTo(0, %)
   |> close(%)

diff --git a/docs/kcl/angledLine.md b/docs/kcl/angledLine.md
@@ -32,7 +32,7 @@ angledLine(data: AngledLineData, sketch: Sketch, tag?: TagDeclarator) -> Sketch
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> yLineTo(15, %)
-  |> angledLine({ angle: 30, length: 15 }, %)
+  |> angledLine({ angle = 30, length = 15 }, %)
   |> line([8, -10], %)
   |> yLineTo(0, %)
   |> close(%)

diff --git a/docs/kcl/angledLineOfXLength.md b/docs/kcl/angledLineOfXLength.md
@@ -31,8 +31,8 @@ angledLineOfXLength(data: AngledLineData, sketch: Sketch, tag?: TagDeclarator) -
 ```js
 sketch001 = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> angledLineOfXLength({ angle: 45, length: 10 }, %, $edge1)
-  |> angledLineOfXLength({ angle: -15, length: 20 }, %, $edge2)
+  |> angledLineOfXLength({ angle = 45, length = 10 }, %, $edge1)
+  |> angledLineOfXLength({ angle = -15, length = 20 }, %, $edge2)
   |> line([0, -5], %)
   |> close(%, $edge3)
 

diff --git a/docs/kcl/angledLineOfYLength.md b/docs/kcl/angledLineOfYLength.md
@@ -32,9 +32,9 @@ angledLineOfYLength(data: AngledLineData, sketch: Sketch, tag?: TagDeclarator) -
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line([10, 0], %)
-  |> angledLineOfYLength({ angle: 45, length: 10 }, %)
+  |> angledLineOfYLength({ angle = 45, length = 10 }, %)
   |> line([0, 10], %)
-  |> angledLineOfYLength({ angle: 135, length: 10 }, %)
+  |> angledLineOfYLength({ angle = 135, length = 10 }, %)
   |> line([-10, 0], %)
   |> line([0, -30], %)
 

diff --git a/docs/kcl/angledLineThatIntersects.md b/docs/kcl/angledLineThatIntersects.md
@@ -35,9 +35,9 @@ exampleSketch = startSketchOn('XZ')
   |> lineTo([-10, 10], %, $lineToIntersect)
   |> lineTo([0, 20], %)
   |> angledLineThatIntersects({
-       angle: 80,
-       intersectTag: lineToIntersect,
-       offset: 10
+       angle = 80,
+       intersectTag = lineToIntersect,
+       offset = 10
      }, %)
   |> close(%)
 

diff --git a/docs/kcl/angledLineToX.md b/docs/kcl/angledLineToX.md
@@ -31,7 +31,7 @@ angledLineToX(data: AngledLineToData, sketch: Sketch, tag?: TagDeclarator) -> Sk
 ```js
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> angledLineToX({ angle: 30, to: 10 }, %)
+  |> angledLineToX({ angle = 30, to = 10 }, %)
   |> line([0, 10], %)
   |> line([-10, 0], %)
   |> close(%)

diff --git a/docs/kcl/angledLineToY.md b/docs/kcl/angledLineToY.md
@@ -31,9 +31,9 @@ angledLineToY(data: AngledLineToData, sketch: Sketch, tag?: TagDeclarator) -> Sk
 ```js
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> angledLineToY({ angle: 60, to: 20 }, %)
+  |> angledLineToY({ angle = 60, to = 20 }, %)
   |> line([-20, 0], %)
-  |> angledLineToY({ angle: 70, to: 10 }, %)
+  |> angledLineToY({ angle = 70, to = 10 }, %)
   |> close(%)
 
 example = extrude(10, exampleSketch)

diff --git a/docs/kcl/arc.md b/docs/kcl/arc.md
@@ -35,9 +35,9 @@ exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line([10, 0], %)
   |> arc({
-       angleStart: 0,
-       angleEnd: 280,
-       radius: 16
+       angleStart = 0,
+       angleEnd = 280,
+       radius = 16
      }, %)
   |> close(%)
 example = extrude(10, exampleSketch)

diff --git a/docs/kcl/arcTo.md b/docs/kcl/arcTo.md
@@ -31,7 +31,7 @@ arcTo(data: ArcToData, sketch: Sketch, tag?: TagDeclarator) -> Sketch
 ```js
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
-  |> arcTo({ end: [10, 0], interior: [5, 5] }, %)
+  |> arcTo({ end = [10, 0], interior = [5, 5] }, %)
   |> close(%)
 example = extrude(10, exampleSketch)
 ```

diff --git a/docs/kcl/asin.md b/docs/kcl/asin.md
@@ -34,8 +34,8 @@ asin(num: number) -> number
 sketch001 = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> angledLine({
-       angle: toDegrees(asin(0.5)),
-       length: 20
+       angle = toDegrees(asin(0.5)),
+       length = 20
      }, %)
   |> yLineTo(0, %)
   |> close(%)

diff --git a/docs/kcl/atan.md b/docs/kcl/atan.md
@@ -34,8 +34,8 @@ atan(num: number) -> number
 sketch001 = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> angledLine({
-       angle: toDegrees(atan(1.25)),
-       length: 20
+       angle = toDegrees(atan(1.25)),
+       length = 20
      }, %)
   |> yLineTo(0, %)
   |> close(%)

diff --git a/docs/kcl/bezierCurve.md b/docs/kcl/bezierCurve.md
@@ -33,9 +33,9 @@ exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line([0, 10], %)
   |> bezierCurve({
-       to: [10, 10],
-       control1: [5, 0],
-       control2: [5, 10]
+       to = [10, 10],
+       control1 = [5, 0],
+       control2 = [5, 10]
      }, %)
   |> lineTo([10, 0], %)
   |> close(%)

diff --git a/docs/kcl/chamfer.md b/docs/kcl/chamfer.md
@@ -44,8 +44,8 @@ mountingPlateSketch = startSketchOn("XY")
 
 mountingPlate = extrude(thickness, mountingPlateSketch)
   |> chamfer({
-       length: chamferLength,
-       tags: [
+       length = chamferLength,
+       tags = [
          getNextAdjacentEdge(edge1),
          getNextAdjacentEdge(edge2),
          getNextAdjacentEdge(edge3),
@@ -72,8 +72,8 @@ part001 = cube([0, 0], 20)
   |> close(%, $line1)
   |> extrude(20, %)
   |> chamfer({
-       length: 10,
-       tags: [getOppositeEdge(line1)]
+       length = 10,
+       tags = [getOppositeEdge(line1)]
      }, %, $chamfer1) // We tag the chamfer to reference it later.
 
 sketch001 = startSketchOn(part001, chamfer1)

diff --git a/docs/kcl/circle.md b/docs/kcl/circle.md
@@ -30,7 +30,7 @@ circle(data: CircleData, sketch_surface_or_group: SketchOrSurface, tag?: TagDecl
 
 ```js
 exampleSketch = startSketchOn("-XZ")
-  |> circle({ center: [0, 0], radius: 10 }, %)
+  |> circle({ center = [0, 0], radius = 10 }, %)
 
 example = extrude(5, exampleSketch)
 ```
@@ -44,7 +44,7 @@ exampleSketch = startSketchOn("XZ")
   |> line([0, 30], %)
   |> line([-30, 0], %)
   |> close(%)
-  |> hole(circle({ center: [0, 15], radius: 5 }, %), %)
+  |> hole(circle({ center = [0, 15], radius = 5 }, %), %)
 
 example = extrude(5, exampleSketch)
 ```

diff --git a/docs/kcl/cos.md b/docs/kcl/cos.md
@@ -34,8 +34,8 @@ cos(num: number) -> number
 exampleSketch = startSketchOn("XZ")
   |> startProfileAt([0, 0], %)
   |> angledLine({
-       angle: 30,
-       length: 3 / cos(toRadians(30))
+       angle = 30,
+       length = 3 / cos(toRadians(30))
      }, %)
   |> yLineTo(0, %)
   |> close(%)

diff --git a/docs/kcl/e.md b/docs/kcl/e.md
@@ -28,7 +28,7 @@ e() -> number
 ```js
 exampleSketch = startSketchOn("XZ")
   |> startProfileAt([0, 0], %)
-  |> angledLine({ angle: 30, length: 2 * e() ^ 2 }, %)
+  |> angledLine({ angle = 30, length = 2 * e() ^ 2 }, %)
   |> yLineTo(0, %)
   |> close(%)
 

diff --git a/docs/kcl/extrude.md b/docs/kcl/extrude.md
@@ -32,16 +32,16 @@ example = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line([10, 0], %)
   |> arc({
-       angleStart: 120,
-       angleEnd: 0,
-       radius: 5
+       angleStart = 120,
+       angleEnd = 0,
+       radius = 5
      }, %)
   |> line([5, 0], %)
   |> line([0, 10], %)
   |> bezierCurve({
-       control1: [-10, 0],
-       control2: [2, 10],
-       to: [-5, 10]
+       control1 = [-10, 0],
+       control2 = [2, 10],
+       to = [-5, 10]
      }, %)
   |> line([-5, -2], %)
   |> close(%)
@@ -54,16 +54,16 @@ example = startSketchOn('XZ')
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([-10, 0], %)
   |> arc({
-       angleStart: 120,
-       angleEnd: -60,
-       radius: 5
+       angleStart = 120,
+       angleEnd = -60,
+       radius = 5
      }, %)
   |> line([10, 0], %)
   |> line([5, 0], %)
   |> bezierCurve({
-       control1: [-3, 0],
-       control2: [2, 10],
-       to: [-5, 10]
+       control1 = [-3, 0],
+       control2 = [2, 10],
+       to = [-5, 10]
      }, %)
   |> line([-4, 10], %)
   |> line([-5, -2], %)

diff --git a/docs/kcl/fillet.md b/docs/kcl/fillet.md
@@ -43,8 +43,8 @@ mountingPlateSketch = startSketchOn("XY")
 
 mountingPlate = extrude(thickness, mountingPlateSketch)
   |> fillet({
-       radius: filletRadius,
-       tags: [
+       radius = filletRadius,
+       tags = [
          getNextAdjacentEdge(edge1),
          getNextAdjacentEdge(edge2),
          getNextAdjacentEdge(edge3),
@@ -70,9 +70,9 @@ mountingPlateSketch = startSketchOn("XY")
 
 mountingPlate = extrude(thickness, mountingPlateSketch)
   |> fillet({
-       radius: filletRadius,
-       tolerance: 0.000001,
-       tags: [
+       radius = filletRadius,
+       tolerance = 0.000001,
+       tags = [
          getNextAdjacentEdge(edge1),
          getNextAdjacentEdge(edge2),
          getNextAdjacentEdge(edge3),

diff --git a/docs/kcl/getNextAdjacentEdge.md b/docs/kcl/getNextAdjacentEdge.md
@@ -30,16 +30,16 @@ getNextAdjacentEdge(tag: TagIdentifier) -> Uuid
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line([10, 0], %)
-  |> angledLine({ angle: 60, length: 10 }, %)
-  |> angledLine({ angle: 120, length: 10 }, %)
+  |> angledLine({ angle = 60, length = 10 }, %)
+  |> angledLine({ angle = 120, length = 10 }, %)
   |> line([-10, 0], %)
-  |> angledLine({ angle: 240, length: 10 }, %, $referenceEdge)
+  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
   |> close(%)
 
 example = extrude(5, exampleSketch)
   |> fillet({
-       radius: 3,
-       tags: [getNextAdjacentEdge(referenceEdge)]
+       radius = 3,
+       tags = [getNextAdjacentEdge(referenceEdge)]
      }, %)
 ```
 

diff --git a/docs/kcl/getOppositeEdge.md b/docs/kcl/getOppositeEdge.md
@@ -30,16 +30,16 @@ getOppositeEdge(tag: TagIdentifier) -> Uuid
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line([10, 0], %)
-  |> angledLine({ angle: 60, length: 10 }, %)
-  |> angledLine({ angle: 120, length: 10 }, %)
+  |> angledLine({ angle = 60, length = 10 }, %)
+  |> angledLine({ angle = 120, length = 10 }, %)
   |> line([-10, 0], %)
-  |> angledLine({ angle: 240, length: 10 }, %, $referenceEdge)
+  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
   |> close(%)
 
 example = extrude(5, exampleSketch)
   |> fillet({
-       radius: 3,
-       tags: [getOppositeEdge(referenceEdge)]
+       radius = 3,
+       tags = [getOppositeEdge(referenceEdge)]
      }, %)
 ```
 

diff --git a/docs/kcl/getPreviousAdjacentEdge.md b/docs/kcl/getPreviousAdjacentEdge.md
@@ -30,16 +30,16 @@ getPreviousAdjacentEdge(tag: TagIdentifier) -> Uuid
 exampleSketch = startSketchOn('XZ')
   |> startProfileAt([0, 0], %)
   |> line([10, 0], %)
-  |> angledLine({ angle: 60, length: 10 }, %)
-  |> angledLine({ angle: 120, length: 10 }, %)
+  |> angledLine({ angle = 60, length = 10 }, %)
+  |> angledLine({ angle = 120, length = 10 }, %)
   |> line([-10, 0], %)
-  |> angledLine({ angle: 240, length: 10 }, %, $referenceEdge)
+  |> angledLine({ angle = 240, length = 10 }, %, $referenceEdge)
   |> close(%)
 
 example = extrude(5, exampleSketch)
   |> fillet({
-       radius: 3,
-       tags: [getPreviousAdjacentEdge(referenceEdge)]
+       radius = 3,
+       tags = [getPreviousAdjacentEdge(referenceEdge)]
      }, %)
 ```
 

diff --git a/docs/kcl/helix.md b/docs/kcl/helix.md
@@ -29,12 +29,12 @@ helix(data: HelixData, solid: Solid) -> Solid
 
 ```js
 part001 = startSketchOn('XY')
-  |> circle({ center: [5, 5], radius: 10 }, %)
+  |> circle({ center = [5, 5], radius = 10 }, %)
   |> extrude(10, %)
   |> helix({
-       angleStart: 0,
-       ccw: true,
-       revolutions: 16
+       angleStart = 0,
+       ccw = true,
+       revolutions = 16
      }, %)
 ```
 

diff --git a/docs/kcl/hole.md b/docs/kcl/hole.md
@@ -34,8 +34,8 @@ exampleSketch = startSketchOn('XY')
   |> line([5, 0], %)
   |> line([0, -5], %)
   |> close(%)
-  |> hole(circle({ center: [1, 1], radius: .25 }, %), %)
-  |> hole(circle({ center: [1, 4], radius: .25 }, %), %)
+  |> hole(circle({ center = [1, 1], radius = .25 }, %), %)
+  |> hole(circle({ center = [1, 4], radius = .25 }, %), %)
 
 example = extrude(1, exampleSketch)
 ```
@@ -54,7 +54,7 @@ fn squareHoleSketch = () => {
 }
 
 exampleSketch = startSketchOn('-XZ')
-  |> circle({ center: [0, 0], radius: 3 }, %)
+  |> circle({ center = [0, 0], radius = 3 }, %)
   |> hole(squareHoleSketch(), %)
 example = extrude(1, exampleSketch)
 ```