Skip to content

Estimate Realtime Case Counts and Time-varying Epidemiological Parameters

License

Notifications You must be signed in to change notification settings

JuliaEpi/EpiNow2

 
 

Repository files navigation

EpiNow2: Estimate real-time case counts and time-varying epidemiological parameters

Lifecycle: maturing R-CMD-check Codecov test coverage metacran downloads

MIT license GitHub contributors PRs Welcome GitHub commits DOI

This package estimates the time-varying reproduction number, growth rate, and doubling time using a range of open-source tools (Abbott et al.), and current best practices (Gostic et al.). It aims to help users avoid some of the limitations of naive implementations in a framework that is informed by community feedback and is under active development.

It estimates the time-varying reproduction number on cases by date of infection (using a similar approach to that implemented in {EpiEstim}). Imputed infections are then mapped to observed data (for example cases by date of report) via a series of uncertain delay distributions (in the examples in the package documentation these are an incubation period and a reporting delay) and a reporting model that can include weekly periodicity.

Uncertainty is propagated from all inputs into the final parameter estimates, helping to mitigate spurious findings. This is handled internally. The time-varying reproduction estimates and the uncertain generation time also give time-varying estimates of the rate of growth.

The default model uses a non-stationary Gaussian process to estimate the time-varying reproduction number and then infer infections. Other options include:

  • A stationary Gaussian process (faster to estimate but currently gives reduced performance for real time estimates).
  • User specified breakpoints.
  • A fixed reproduction number.
  • As piecewise constant by combining a fixed reproduction number with breakpoints.
  • As a random walk (by combining a fixed reproduction number with regularly spaced breakpoints (i.e weekly)).
  • Inferring infections using back-calculation and then calculating the time-varying reproduction number.

The documentation for estimate_infections provides examples of the different options available.

Forecasting is also supported for the time-varying reproduction number, infections and reported cases. The time-varying reproduction number can be forecast forwards in time using an integration with the {EpiSoon} package, and converted to a case forecast using the renewal equation. Alternatively, the time-varying reproduction number and cases can be forecast using a Gaussian process.

A simple example of using the package to estimate a national Rt for Covid-19 can be found here.

EpiNow2 also supports adjustment for truncated data via estimate_truncation() and for estimating dependent observations (i.e deaths based on hospital admissions) using estimate_secondary().

Installation

Install the stable version of the package:

install.packages("EpiNow2")

Install the stable development version of the package with:

install.packages("EpiNow2", repos = "https://epiforecasts.r-universe.dev")

Install the unstable development version of the package with (few users should need to do this):

remotes::install_github("epiforecasts/EpiNow2")

Windows users will need a working installation of Rtools in order to build the package from source. See here for a guide to installing Rtools for use with Stan (which is the statistical modelling platform used for the underlying model). For simple deployment/development a prebuilt docker image is also available (see documentation here).

Quick start

{EpiNow2} is designed to be used with a single function call or to be used in an ad-hoc fashion via individual function calls. The core functions of {EpiNow2} are the two single-call functions epinow(), regional_epinow(), plus functions estimate_infections(), forecast_infections(), estimate_secondary() and estimate_truncation(). In the following section we give an overview of the simple use case for epinow and regional_epinow. estimate_infections() can be used on its own to infer the underlying infection case curve from reported cases and estimate Rt. Estimating the underlying infection case curve via back-calculation (and then calculating Rt) is substantially less computationally demanding than generating using default settings but may result in less reliable estimates of Rt. For more details on using each function see the function documentation.

The first step to using the package is to load it as follows.

library(EpiNow2)

Reporting delays, incubation period and generation time

Distributions can either be fitted using package functionality or determined elsewhere and then defined with uncertainty for use in {EpiNow2}. When data is supplied a subsampled bootstrapped lognormal will be fit (to account for uncertainty in the observed data without being biased by changes in incidence). An arbitrary number of delay distributions are supported with the most common use case likely to be a incubation period followed by a reporting delay.

For example if data on the delay between onset and infection was available we could fit a distribution to it with appropriate uncertainty as follows (note this is a synthetic example),

reporting_delay <- estimate_delay(rlnorm(1000, log(2), 1),
                                  max_value = 15, bootstraps = 1)

If data was not available we could instead make an informed estimate of the likely delay (note this is a synthetic example and not applicable to real world use cases),

reporting_delay <- list(
  mean = convert_to_logmean(2, 1), mean_sd = 0.1,
  sd = convert_to_logsd(2, 1), sd_sd = 0.1,
  max = 10
)

Here we define the incubation period and generation time based on literature estimates for Covid-19 (see here for the code that generates these estimates). Note that these distributions may not be applicable for your use case.

generation_time <- get_generation_time(disease = "SARS-CoV-2", source = "ganyani")
incubation_period <- get_incubation_period(disease = "SARS-CoV-2", source = "lauer")

This function represents the core functionality of the package and includes results reporting, plotting and optional saving. It requires a data frame of cases by date of report and the distributions defined above. An additional forecasting module is supported via EpiSoon and companion packages (see documentation for an example).

Load example case data from {EpiNow2}.

reported_cases <- example_confirmed[1:90]
head(reported_cases)
#>          date confirm
#> 1: 2020-02-22      14
#> 2: 2020-02-23      62
#> 3: 2020-02-24      53
#> 4: 2020-02-25      97
#> 5: 2020-02-26      93
#> 6: 2020-02-27      78

Estimate cases by date of infection, the time-varying reproduction number, the rate of growth and forecast these estimates into the future by 7 days. Summarise the posterior and return a summary table and plots for reporting purposes. If a target_folder is supplied results can be internally saved (with the option to also turn off explicit returning of results). Note: For real use cases more samples and a longer warm up may be needed. See fitting progress by setting verbose = TRUE.

estimates <- epinow(reported_cases = reported_cases,
                    generation_time = generation_time,
                    delays = delay_opts(incubation_period, reporting_delay),
                    rt = rt_opts(prior = list(mean = 2, sd = 0.2)),
                    stan = stan_opts(cores = 4))
#> WARN [2021-06-03 17:34:10] epinow: There were 12 divergent transitions after warmup. See
#> http://mc-stan.org/misc/warnings.html#divergent-transitions-after-warmup
#> to find out why this is a problem and how to eliminate them. - 
#> WARN [2021-06-03 17:34:10] epinow: Examine the pairs() plot to diagnose sampling problems
#>  -
names(estimates)
#> [1] "estimates"                "estimated_reported_cases"
#> [3] "summary"                  "plots"                   
#> [5] "timing"

Both summary measures and posterior samples are returned for all parameters in an easily explored format which can be accessed using summary. The default is to return a summary table of estimates for key parameters at the latest date partially supported by data.

knitr::kable(summary(estimates))
measure estimate
New confirmed cases by infection date 523 (302 – 969)
Expected change in daily cases Likely decreasing
Effective reproduction no. 0.87 (0.66 – 1.2)
Rate of growth -0.036 (-0.098 – 0.047)
Doubling/halving time (days) -19 (15 – -7.1)

Summarised parameter estimates can also easily be returned, either filtered for a single parameter or for all parameters.

head(summary(estimates, type = "parameters", params = "R"))
#>          date variable strat     type   median     mean         sd lower_90
#> 1: 2020-02-22        R  <NA> estimate 2.133093 2.137658 0.13137620 1.926917
#> 2: 2020-02-23        R  <NA> estimate 2.109117 2.112571 0.11083424 1.931201
#> 3: 2020-02-24        R  <NA> estimate 2.082687 2.085759 0.09354013 1.934617
#> 4: 2020-02-25        R  <NA> estimate 2.055390 2.057204 0.07947132 1.931348
#> 5: 2020-02-26        R  <NA> estimate 2.026786 2.026924 0.06851200 1.917109
#> 6: 2020-02-27        R  <NA> estimate 1.994271 1.994970 0.06041157 1.898286
#>    lower_50 lower_20 upper_20 upper_50 upper_90
#> 1: 2.049114 2.101994 2.163746 2.223936 2.357658
#> 2: 2.036474 2.081873 2.134224 2.187256 2.297180
#> 3: 2.020257 2.058613 2.104525 2.152345 2.238099
#> 4: 2.002585 2.034048 2.076017 2.112149 2.189332
#> 5: 1.981163 2.006801 2.043096 2.073449 2.140342
#> 6: 1.954004 1.978110 2.009518 2.035002 2.094222

Reported cases are returned in a separate data frame in order to streamline the reporting of forecasts and for model evaluation.

head(summary(estimates, output = "estimated_reported_cases"))
#>          date  type median     mean       sd lower_90 lower_50 lower_20
#> 1: 2020-02-22 gp_rt     52  52.4710 13.62152       32    43.00       48
#> 2: 2020-02-23 gp_rt     66  67.3205 16.38692       43    56.00       62
#> 3: 2020-02-24 gp_rt     72  72.9440 17.46079       47    60.00       68
#> 4: 2020-02-25 gp_rt     72  74.3385 17.97564       47    62.00       69
#> 5: 2020-02-26 gp_rt     95  96.7315 23.17449       61    81.00       90
#> 6: 2020-02-27 gp_rt    128 129.6315 29.29839       85   108.75      121
#>    upper_20 upper_50 upper_90
#> 1:       55       61       76
#> 2:       70       77       97
#> 3:       76       83      104
#> 4:       77       85      106
#> 5:      101      111      136
#> 6:      135      148      181

A range of plots are returned (with the single summary plot shown below). These plots can also be generated using the following plot method.

plot(estimates)

The regional_epinow() function runs the epinow() function across multiple regions in an efficient manner.

Define cases in multiple regions delineated by the region variable.

reported_cases <- data.table::rbindlist(list(
   data.table::copy(reported_cases)[, region := "testland"],
   reported_cases[, region := "realland"]))
head(reported_cases)
#>          date confirm   region
#> 1: 2020-02-22      14 testland
#> 2: 2020-02-23      62 testland
#> 3: 2020-02-24      53 testland
#> 4: 2020-02-25      97 testland
#> 5: 2020-02-26      93 testland
#> 6: 2020-02-27      78 testland

Calling regional_epinow() runs the epinow() on each region in turn (or in parallel depending on the settings used).

estimates <- regional_epinow(reported_cases = reported_cases,
                             generation_time = generation_time,
                             delays = delay_opts(incubation_period, reporting_delay),
                             rt = rt_opts(prior = list(mean = 2, sd = 0.2)),
                             stan = stan_opts(cores = 4))
#> INFO [2021-06-03 17:34:17] Producing following optional outputs: regions, summary, samples, plots, latest
#> INFO [2021-06-03 17:34:17] Reporting estimates using data up to: 2020-05-21
#> INFO [2021-06-03 17:34:17] No target directory specified so returning output
#> INFO [2021-06-03 17:34:17] Producing estimates for: testland, realland
#> INFO [2021-06-03 17:34:17] Regions excluded: none
#> INFO [2021-06-03 17:38:59] Completed estimates for: testland
#> INFO [2021-06-03 17:43:57] Completed estimates for: realland
#> INFO [2021-06-03 17:43:57] Completed regional estimates
#> INFO [2021-06-03 17:43:57] Regions with estimates: 2
#> INFO [2021-06-03 17:43:57] Regions with runtime errors: 0
#> INFO [2021-06-03 17:43:58] Producing summary
#> INFO [2021-06-03 17:43:58] No summary directory specified so returning summary output
#> INFO [2021-06-03 17:43:58] No target directory specified so returning timings

Results from each region are stored in a regional list with across region summary measures and plots stored in a summary list. All results can be set to be internally saved by setting the target_folder and summary_dir arguments. Each region can be estimated in parallel using the {future} package (when in most scenarios cores should be set to 1). For routine use each MCMC chain can also be run in parallel (with future = TRUE) with a time out (max_execution_time) allowing for partial results to be returned if a subset of chains is running longer than expected. See the documentation for the {future} package for details on nested futures.

Summary measures that are returned include a table formatted for reporting (along with raw results for further processing). Futures updated will extend the S3 methods used above to smooth access to this output.

knitr::kable(estimates$summary$summarised_results$table)
Region New confirmed cases by infection date Expected change in daily cases Effective reproduction no. Rate of growth Doubling/halving time (days)
realland 522 (307 – 959) Likely decreasing 0.87 (0.66 – 1.2) -0.037 (-0.098 – 0.042) -19 (16 – -7.1)
testland 520 (296 – 923) Likely decreasing 0.87 (0.65 – 1.1) -0.038 (-0.1 – 0.036) -18 (20 – -6.9)

A range of plots are again returned (with the single summary plot shown below).

estimates$summary$summary_plot

Reporting templates

Rmarkdown templates are provided in the package (templates) for semi-automated reporting of estimates. These are currently undocumented but an example integration can be seen here. If using these templates to report your results please highlight our limitations as these are key to understanding the results from {EpiNow2} .

Contributing

File an issue here if you have identified an issue with the package. Please note that due to operational constraints priority will be given to users informing government policy or offering methodological insights. We welcome all contributions, in particular those that improve the approach or the robustness of the code base. We also welcome additions and extensions to the underlying model either in the form of options or improvements.

About

Estimate Realtime Case Counts and Time-varying Epidemiological Parameters

Resources

License

Code of conduct

Stars

Watchers

Forks

Releases

No releases published

Packages

No packages published

Languages

  • HTML 85.9%
  • R 12.4%
  • Stan 1.6%
  • Other 0.1%