cs-3250

A starter template for our RESTful Spring Boot applications in CS 3250, Software Development Methods and Tools

Running the Docker containers

1. You can install Docker on your computer if you have not already done so here: https://docs.docker.com/get-docker/

   • NOTE for Windows users: I highly recommend that you enable the Windows Subsystem for Linux Version 2 (WSL2), and install a default Linux distribution (i.e. Ubuntu 20.04) prior to installing Docker. Docker will run much easier on all editions of Windows 10 if you perform this step first
   • This article will walk you through enabling WSL2: https://www.omgubuntu.co.uk/how-to-install-wsl2-on-windows-10
     • NOTE: If your BIOS does not have virtualization enabled, you may encounter an error enabling WSL 2. This article can help you enable virtualization on your computer: https://support.bluestacks.com/hc/en-us/articles/115003174386-How-to-enable-Virtualization-VT-on-Windows-10-for-BlueStacks-4
   • Once you have Docker installed, set Ubuntu 20.04 to be your default distribution
     • First, make sure you have downloaded Ubuntu 20 from the Microsoft Store: https://www.microsoft.com/en-us/p/ubuntu-2004-lts/9n6svws3rx71
     • Next, open a command prompt as administrator (https://www.howtogeek.com/194041/how-to-open-the-command-prompt-as-administrator-in-windows-8.1/) and running the following command:
       • wsl -s Ubuntu-20.04
   • Once your default distribution is set, verify Docker is configured correctly to use WSL 2 and your default WSL distro: https://docs.docker.com/docker-for-windows/wsl/
     • Check the "Settings > General" and ""Settings > Resources > WSL Integration" sections of your Docker installation and compare them to the screenshots on this website
   • NOTE: On macOS you may want to increase the amount of memory available to Docker from 2GB to at least 5GB. If you go to Docker settings you can find the memory settings under Preferences -> Resources

2. After installing Docker, start the necessary containers for the project by running the start-container script appropriate for your operating system inside the scripts folder

   • start-container for macOS and Linux
   • start-container.bat for Windows

Developing

1. Once the Docker containers have started, attach to the development container by running the attach-container script appropriate for your operating system inside the scripts folder
   • attach-container for macOS and Linux
   • attach-container.bat for Windows
2. If you want to attach to the Postgres container instead (necessary for week two lectures!), run the attach-postgres-container script
   • attach-postgres-container for macOS and Linux
   • attach-postgres-container.bat for Windows
3. Once inside the start-container script, you can run the following commands to build and test the project
   • mvn compile - Compile the application
     • NOTE: In order for Intellij to automatically reload Maven changes, I would encourage you to change your Maven auto-reload settings to "Any changes":
       • https://www.jetbrains.com/help/idea/delegate-build-and-run-actions-to-maven.html#auto_reload_maven
   • mvn test -P test - Run unit/integration tests
   • mvn package spring-boot:repackage -P test - Package the deployable JAR file for the application
   • mvn spring-boot:run - Start the Spring Boot application locally for testing
     • This will run until you press CTRL+C
     • NOTE: When you are running the application, it will automatically reload changes after the project is rebuilt! In order to take advantage of this, I would encourage you to configure auto-build in Intellij:
       • https://www.jetbrains.com/help/idea/compiling-applications.html#auto-build
4. The first time you start up this container, you will need to re-create the 7dbs database we were using for lab03. In order to do this, I have provided a database export you can quickly import to get up and running! Here are the steps that are required (NOTE this step only has to be run once):
   • Open a new terminal and run attach-postgres-container inside the scripts folder
   • Become the postgres user by running su - postgres
   • Import the database by running the commands:
     • createdb 7dbs
     • createdb 7dbs_test
     • psql -d 7dbs < /app/postgres/database/7dbs.sql
       • This command will take a few seconds to complete
   • After the import has completed, verify the 7dbs database is present by running psql 7dbs
     • You can query the tables to make sure they have data: SELECT * from events;
5. In order to test your RESTful APIs manually, a set of Postman tests will be maintained in the scripts/postman folder. You can import these tests into your local Postman instance, modify them, and then update them in the repository! Instructions for how to do that can be found here:
   • https://learning.postman.com/docs/getting-started/importing-and-exporting-data/#importing-data-into-postman
   • https://learning.postman.com/docs/getting-started/importing-and-exporting-data/#exporting-postman-data
   • https://www.youtube.com/watch?v=FzPBDU7cB74&ab_channel=FunDooTesters

Deploying

1. We will be deploying our Spring Boot applications to Heroku, a cloud provider that knows how to natively run Spring Boot applications. There are a few one-time setup steps required to make sure your application goes to the right place, and they are summarized here:
   • First, you need to make sure your local environment is authenticated with Heroku. Do that by running the command heroku login from inside the attach-conatiner environment. This command should only have to be executed once.
     • This will provide you with a URL you need to copy and paste into a web browser to log in and authenticate with
   • Second, you need to create an application inside Heroku to push your application to. This is accomplished by running the command heroku create appname, where appname is the name of the application you are creating
     • For labs, use the name cs-3250-lab#-username, where lab# is the lab number (like lab04), and username is your GitHub username, for example heroku create cs-3250-lab04-dpittman. This command should only have to be executed once.
   • Third, we need to add a free tier PostgreSQL database to our deployment. We can do this by running the command heroku addons:create heroku-postgresql:hobby-dev. This command should only have to be run once.
   • Fourth, we need to change the Maven command that is executed to build and package our application. We can do this by running the command heroku config:set MAVEN_CUSTOM_GOALS="clean dependency:list package spring-boot:repackage install". This command should only have to be run once.
2. Once you have run all the one-time setup steps for your repository, you can then build and deploy your app to Heroku with the following commands:
   • git add .
   • git commit -m "Deployment to Heroku"
   • git push heroku main
3. To get the URL by which you can access your Spring Boot API, run the command heroku open and it will display the appropriate URL
4. If you need to check the logs for your Spring Boot application, you can run the command heroku logs to see any errors that might have occurred
5. If you need to force Heroku to rebuild your application, you can do so by creating an "empty commit" via this command: git commit --allow-empty -m "empty commit". You can then push the empty commit to cause Heroku to rebuild with git push heroku main