🎨 LPC_SOFTWARE_SPI => SOFTWARE_SPI

Co-Authored-By: Martin Turski <[email protected]>
Infobitas · May 17, 2023 · 376e940 · 376e940
1 parent ebe3fe0
commit 376e940
Show file tree

Hide file tree

Showing 5 changed files with 12 additions and 12 deletions.
diff --git a/Marlin/src/HAL/LINUX/spi_pins.h b/Marlin/src/HAL/LINUX/spi_pins.h
@@ -25,10 +25,10 @@
 #include "../../inc/MarlinConfigPre.h"
 
 #if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
-  #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
-                            // needed due to the speed and mode required for communicating with each device being different.
-                            // This requirement can be removed if the SPI access to these devices is updated to use
-                            // spiBeginTransaction.
+  #define SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
+                        // needed due to the speed and mode required for communicating with each device being different.
+                        // This requirement can be removed if the SPI access to these devices is updated to use
+                        // spiBeginTransaction.
 #endif
 
 // Onboard SD

diff --git a/Marlin/src/HAL/LPC1768/HAL_SPI.cpp b/Marlin/src/HAL/LPC1768/HAL_SPI.cpp
@@ -60,7 +60,7 @@
 // ------------------------
 // Public functions
 // ------------------------
-#if ENABLED(LPC_SOFTWARE_SPI)
+#if ENABLED(SOFTWARE_SPI)
 
   // Software SPI
 
@@ -161,7 +161,7 @@
     // TODO: Implement this method
   }
 
-#endif // LPC_SOFTWARE_SPI
+#endif // SOFTWARE_SPI
 
 /**
  * @brief Wait until TXE (tx empty) flag is set and BSY (busy) flag unset.

diff --git a/Marlin/src/HAL/LPC1768/spi_pins.h b/Marlin/src/HAL/LPC1768/spi_pins.h
@@ -24,10 +24,10 @@
 #include "../../core/macros.h"
 
 #if BOTH(SDSUPPORT, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
-  #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
-                            // needed due to the speed and mode required for communicating with each device being different.
-                            // This requirement can be removed if the SPI access to these devices is updated to use
-                            // spiBeginTransaction.
+  #define SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
+                        // needed due to the speed and mode required for communicating with each device being different.
+                        // This requirement can be removed if the SPI access to these devices is updated to use
+                        // spiBeginTransaction.
 #endif
 
 /** onboard SD card */

diff --git a/Marlin/src/HAL/NATIVE_SIM/spi_pins.h b/Marlin/src/HAL/NATIVE_SIM/spi_pins.h
@@ -25,7 +25,7 @@
 #include "../../inc/MarlinConfigPre.h"
 
 #if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
-  #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
+  #define SOFTWARE_SPI      // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                             // needed due to the speed and mode required for communicating with each device being different.
                             // This requirement can be removed if the SPI access to these devices is updated to use
                             // spiBeginTransaction.

diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h
@@ -186,7 +186,7 @@
   #define SD_MISO_PIN                      P1_23  // J8-3 (moved from EXP2 P0.8)
   #define SD_MOSI_PIN                      P2_12  // J8-4 (moved from EXP2 P0.9)
   #define SD_SS_PIN                        P0_28
-  #define LPC_SOFTWARE_SPI                        // With a custom cable we need software SPI because the
+  #define SOFTWARE_SPI                            // With a custom cable we need software SPI because the
                                                   // selected pins are not on a hardware SPI controller
 #elif SD_CONNECTION_IS(LCD) || SD_CONNECTION_IS(ONBOARD)
   #define SD_SCK_PIN                       P0_07