DCS M 2000C

NOTE: These are notes left by the author of the DCS M-2000C interface. There is no current maintainer for this interface.

Status as of: 4th October 2019

Release Helios v1.4.2020.*

What's new DCS M2000C

* Improvement of guards on the Test and LG Panels
	- Made all 4 guards on this 2 panels working
* Improvement of the Tacan Panel
	- add the 2 potentiometers and made them continuous and working in both sens
	- the display of the channel X/Y mode works
* Improvement of VOR/ILS Panel
	- added the 2 potentiometers and made them continuous and working in both sens
	- made the Mode Selector working
* Improvement of the HSI Panel
	- all the needles are working

Known issues DCS M2000C

* Fuel Panel
   - the Fuel CrossFeed Switch doesn’t work
   - the two toggle switches don’t work (seems not to be used in DCS)
* Master Caution lights Panel
   - seems the id is not the good one when clicking on the 2 indicators ?
* HSI Panel
   - the compass rose need to be redisign
   - the potentiometer doesn’t work properly
* ECM Box
   - the potentiometer is not working
* Miscellaneous Panels
   - I don’t know how to test the Fire Warning Indicators. Does someone has a match? :-)

Release Helios v1.4.2019.1005

What's new DCS M2000C

* Added the Fuel Panel
   - added the 7 indicators empty tanks
   - added the refueling indicator
   - added the left and right neddle gauges
   - improved to use a more reusable code
* Added the PCA Panel
   - added the 17 indicators on the buttons
   - added the 11 buttons
   - added the 2 switches
   - added the guard
* Added the PCN	Panel
   - added the 9 indicators 
   - added the 9 indicators buttons
   - added the 10 keypad buttons
   - added the Parameter selector working only from DCS to Helios
* Added the PPA Panel
   - added the 8 indicators on the buttons
   - added the 4 buttons
   - added the 5 switches
* Added the TACAN Panel
   - added the frequency display
   - added the 2 switches (X/Y Mode and Mode Select)
* Added the VOR/ILS Panel
   - added the frequency display
   - added the 2 switches (Power and Mode Select)
* Added the Engine Sensors Panel (still in beta)
   - added the 2 needles
   - added the drum
* Added the HSI Panel (still in beta)
   - added the drum (working)
   - added the 4 stop flags (2 are working)
   - added the 2 needles
   - added the green needle
   - added the mode needle (working)
   - added the compass rose (partially working)
   - added the switch and the potentiometer
* Added the ECM Box
   - added the potentiometer
   - added the 3 switches
* Added the INS Panel
   - added the 2 switches
* Added the Test Panel
   - added the 4 indicators 
   - added the 3 switches
   - added the 3 guards on the switches
* Improvement of the Engine Panel
   - added the 2 guards
* Improvement of the Landing Gear Panel
   - added the guard for the gun safe switch 
   - added the emergency landing gear lever
* Improvement of the Master Caution lights Panel
   - try to make the 2 indicators clickable with the same solution as the PCN Panel --> doesn’t work
* Improvement of the pictures of the cockpit to allow the new panels to work fine
* Miscellaneous Panels
   - Added the Post Combustion Indicator
   - Added the 2 Fire Warning Indicators (need a match to test it :-)
   - Added the Demar Indicator
   - Added the 5 RWR indicators
   - Added the AOA needle

Release Helios v1.4.2019.0908

* Added the Caution Panel
   - added all the indicators
   - added all the switches

 *Added the Master Caution Lights Panel
   - added the 2 red and yellow PANNE indicators
  
* Added the Start Engine Panel
   - added the 5 switches
  
* Added the Landing Gear Panel
   - added the 3 switches, the landing gear lever, the emergency jettison lever and all the indicators

Please take note that not all has been tested so far, but most of the switches might work. Thanks for your patience and feedback

--ShadowMan