Sync develop changes April 3 - April4 to hdf5_1_14

config/cmake/ConfigureChecks.cmake

@@ -923,46 +923,56 @@ if (HDF5_ENABLE_NONSTANDARD_FEATURE_FLOAT16)
       # compile a program that will generate these functions to check for _Float16
       # support. If we fail to compile this program, we will simply disable
       # _Float16 support for the time being.
+      H5ConversionTests (
+          ${HDF_PREFIX}_FLOAT16_CONVERSION_FUNCS_LINK
+          FALSE
+          "Checking if compiler can convert _Float16 type with casts"
+      )
 
       # Some compilers, notably AppleClang on MacOS 12, will succeed in the
-      # configure check below when optimization flags like -O3 are manually
+      # configure check above when optimization flags like -O3 are manually
       # passed in CMAKE_C_FLAGS. However, the build will then fail when it
       # reaches compilation of H5Tconv.c because of the issue mentioned above.
-      # MacOS 13 appears to have fixed this, but, just to be sure, backup and
-      # clear CMAKE_C_FLAGS before performing these configure checks.
+      # MacOS 13 appears to have fixed this, but, just to be sure, make sure
+      # the check also passes without the passed in CMAKE_C_FLAGS.
       set (cmake_c_flags_backup "${CMAKE_C_FLAGS}")
       set (CMAKE_C_FLAGS "")
 
       H5ConversionTests (
-          ${HDF_PREFIX}_FLOAT16_CONVERSION_FUNCS_LINK
+          ${HDF_PREFIX}_FLOAT16_CONVERSION_FUNCS_LINK_NO_FLAGS
           FALSE
-          "Checking if compiler can convert _Float16 type with casts"
+          "Checking if compiler can convert _Float16 type with casts (without CMAKE_C_FLAGS)"
       )
 
       set (CMAKE_C_FLAGS "${cmake_c_flags_backup}")
 
-      if (${${HDF_PREFIX}_FLOAT16_CONVERSION_FUNCS_LINK})
+      if (${HDF_PREFIX}_FLOAT16_CONVERSION_FUNCS_LINK AND ${HDF_PREFIX}_FLOAT16_CONVERSION_FUNCS_LINK_NO_FLAGS)
         # Finally, MacOS 13 appears to have a bug specifically when converting
         # long double values to _Float16. Release builds of the dt_arith test
         # would cause any assignments to a _Float16 variable to be elided,
         # whereas Debug builds would perform incorrect hardware conversions by
         # simply chopping off all the bytes of the value except for the first 2.
         # These tests pass on MacOS 14, so let's perform a quick test to check
         # if the hardware conversion is done correctly.
+        H5ConversionTests (
+            ${HDF_PREFIX}_LDOUBLE_TO_FLOAT16_CORRECT
+            TRUE
+            "Checking if correctly converting long double to _Float16 values"
+        )
 
-        # Backup and clear CMAKE_C_FLAGS before performing configure checks
+        # Backup and clear CMAKE_C_FLAGS before performing configure check again
         set (cmake_c_flags_backup "${CMAKE_C_FLAGS}")
         set (CMAKE_C_FLAGS "")
 
         H5ConversionTests (
-            ${HDF_PREFIX}_LDOUBLE_TO_FLOAT16_CORRECT
+            ${HDF_PREFIX}_LDOUBLE_TO_FLOAT16_CORRECT_NO_FLAGS
             TRUE
-            "Checking if correctly converting long double to _Float16 values"
+            "Checking if correctly converting long double to _Float16 values (without CMAKE_C_FLAGS)"
         )
 
         set (CMAKE_C_FLAGS "${cmake_c_flags_backup}")
 
-        if (NOT ${${HDF_PREFIX}_LDOUBLE_TO_FLOAT16_CORRECT})
+        if (NOT ${HDF_PREFIX}_LDOUBLE_TO_FLOAT16_CORRECT OR NOT ${HDF_PREFIX}_LDOUBLE_TO_FLOAT16_CORRECT_NO_FLAGS)
           message (VERBOSE "Conversions from long double to _Float16 appear to be incorrect. These will be emulated through a soft conversion function.")
         endif ()
 
@@ -985,3 +995,7 @@ else ()
   unset (${HDF_PREFIX}_HAVE__FLOAT16 CACHE)
   unset (${HDF_PREFIX}_LDOUBLE_TO_FLOAT16_CORRECT CACHE)
 endif ()
+
+if (NOT ${HDF_PREFIX}_HAVE__FLOAT16)
+  set (HDF5_ENABLE_NONSTANDARD_FEATURE_FLOAT16 OFF CACHE BOOL "Enable support for _Float16 C datatype" FORCE)
+endif ()

config/cmake/ConversionTests.c

@@ -286,7 +286,7 @@ int HDF_NO_UBSAN main(void)
 
 #endif
 
-#ifdef H5_FLOAT16_CONVERSION_FUNCS_LINK_TEST
+#if defined(H5_FLOAT16_CONVERSION_FUNCS_LINK_TEST) || defined(H5_FLOAT16_CONVERSION_FUNCS_LINK_NO_FLAGS_TEST)
 
 #define __STDC_WANT_IEC_60559_TYPES_EXT__
 
@@ -379,7 +379,7 @@ int HDF_NO_UBSAN main(void)
 
 #endif
 
-#ifdef H5_LDOUBLE_TO_FLOAT16_CORRECT_TEST
+#if defined(H5_LDOUBLE_TO_FLOAT16_CORRECT_TEST) || defined(H5_LDOUBLE_TO_FLOAT16_CORRECT_NO_FLAGS_TEST)
 
 #define __STDC_WANT_IEC_60559_TYPES_EXT__
 

configure.ac

@@ -674,11 +674,34 @@ if test "X$ENABLE_FLOAT16" = "Xyes"; then
       AC_CACHE_VAL([hdf5_cv_float16_conversion_funcs_link],
       [AC_RUN_IFELSE(
           [AC_LANG_SOURCE([$TEST_SRC])],
-          [hdf5_cv_float16_conversion_funcs_link=yes], [hdf5_cv_float16_conversion_funcs_link=no], [hdf5_cv_float16_conversion_funcs_link=no])])
+          [hdf5_cv_float16_conversion_funcs_link=yes],
+          [hdf5_cv_float16_conversion_funcs_link=no],
+          [hdf5_cv_float16_conversion_funcs_link=no])])
+      AC_MSG_RESULT(${hdf5_cv_float16_conversion_funcs_link})
+
+      # Some compilers, notably AppleClang on MacOS 12, will succeed in the
+      # configure check above when optimization flags like -O3 are manually
+      # passed in CFLAGS. However, the build will then fail when it reaches
+      # compilation of H5Tconv.c because of the issue mentioned above. MacOS
+      # 13 appears to have fixed this, but, just to be sure, make sure the
+      # check also passes without the passed in CFLAGS.
+      conftest_cflags_backup="$CFLAGS"
+      CFLAGS=""
+
+      AC_MSG_CHECKING([if compiler can correctly compile and run a test program which converts _Float16 to other types with casts (without CFLAGS)])
+      TEST_SRC="`(echo \"#define H5_FLOAT16_CONVERSION_FUNCS_LINK_NO_FLAGS_TEST 1\"; cat $srcdir/config/cmake/ConversionTests.c)`"
+      AC_CACHE_VAL([hdf5_cv_float16_conversion_funcs_link_no_flags],
+      [AC_RUN_IFELSE(
+          [AC_LANG_SOURCE([$TEST_SRC])],
+          [hdf5_cv_float16_conversion_funcs_link_no_flags=yes],
+          [hdf5_cv_float16_conversion_funcs_link_no_flags=no],
+          [hdf5_cv_float16_conversion_funcs_link_no_flags=no])])
+      AC_MSG_RESULT(${hdf5_cv_float16_conversion_funcs_link_no_flags})
 
-      if test ${hdf5_cv_float16_conversion_funcs_link} = "yes"; then
-        AC_MSG_RESULT([yes])
+      CFLAGS="$conftest_cflags_backup"
 
+      if test ${hdf5_cv_float16_conversion_funcs_link} = "yes" &&
+         test ${hdf5_cv_float16_conversion_funcs_link_no_flags} = "yes"; then
         # Finally, MacOS 13 appears to have a bug specifically when converting
         # long double values to _Float16. Release builds of the dt_arith test
         # would cause any assignments to a _Float16 variable to be elided,
@@ -694,15 +717,37 @@ if test "X$ENABLE_FLOAT16" = "Xyes"; then
           AC_CACHE_VAL([hdf5_cv_ldouble_to_float16_correct],
           [AC_RUN_IFELSE(
               [AC_LANG_SOURCE([$TEST_SRC])],
-              [hdf5_cv_ldouble_to_float16_correct=yes], [hdf5_cv_ldouble_to_float16_correct=no], [hdf5_cv_ldouble_to_float16_correct=yes])])
+              [hdf5_cv_ldouble_to_float16_correct=yes],
+              [hdf5_cv_ldouble_to_float16_correct=no],
+              [hdf5_cv_ldouble_to_float16_correct=yes])])
         fi
+        AC_MSG_RESULT(${hdf5_cv_ldouble_to_float16_correct})
+
+        # Backup and clear CFLAGS before performing configure check again
+        conftest_cflags_backup="$CFLAGS"
+        CFLAGS=""
 
-        if test ${hdf5_cv_ldouble_to_float16_correct} = "yes"; then
+        AC_MSG_CHECKING([if compiler can correctly convert long double values to _Float16 (without CFLAGS)])
+        TEST_SRC="`(echo \"#define H5_LDOUBLE_TO_FLOAT16_CORRECT_NO_FLAGS_TEST 1\"; cat $srcdir/config/cmake/ConversionTests.c)`"
+        if test ${ac_cv_sizeof_long_double} = 0; then
+          hdf5_cv_ldouble_to_float16_correct_no_flags=${hdf5_cv_ldouble_to_float16_correct_no_flags=no}
+        else
+          AC_CACHE_VAL([hdf5_cv_ldouble_to_float16_correct_no_flags],
+          [AC_RUN_IFELSE(
+              [AC_LANG_SOURCE([$TEST_SRC])],
+              [hdf5_cv_ldouble_to_float16_correct_no_flags=yes],
+              [hdf5_cv_ldouble_to_float16_correct_no_flags=no],
+              [hdf5_cv_ldouble_to_float16_correct_no_flags=yes])])
+        fi
+        AC_MSG_RESULT(${hdf5_cv_ldouble_to_float16_correct_no_flags})
+
+        CFLAGS="$conftest_cflags_backup"
+
+        if test ${hdf5_cv_ldouble_to_float16_correct} = "yes" &&
+           test ${hdf5_cv_ldouble_to_float16_correct_no_flags} = "yes"; then
           AC_DEFINE([LDOUBLE_TO_FLOAT16_CORRECT], [1],
             [Define if your system can convert long double to _Float16 values correctly.])
-          AC_MSG_RESULT([yes])
         else
-          AC_MSG_RESULT([no])
           AC_MSG_NOTICE([Conversions from long double to _Float16 appear to be incorrect. These will be emulated through a soft conversion function.])
         fi
 
@@ -714,8 +759,6 @@ if test "X$ENABLE_FLOAT16" = "Xyes"; then
 
         # Define HAVE__FLOAT16 macro for H5pubconf.h if _Float16 is available.
         AC_DEFINE([HAVE__FLOAT16], [1], [Determine if _Float16 is available])
-      else
-        AC_MSG_RESULT([no])
       fi
     fi
 

release_docs/RELEASE.txt

@@ -1106,9 +1106,6 @@ Known Problems
     images, but since this is a collective operation, a deadlock is possible
     if one or more processes do not participate.
 
-    CPP ptable test fails on both VS2017 and VS2019 with Intel compiler, JIRA
-    issue: HDFFV-10628.  This test will pass with VS2015 with Intel compiler.
-
     The subsetting option in ph5diff currently will fail and should be avoided.
     The subsetting option works correctly in serial h5diff.
 

src/H5Gent.c

@@ -365,19 +365,24 @@ H5G__ent_to_link(const H5G_entry_t *ent, const H5HL_t *heap, H5O_link_t *lnk)
     assert(heap);
     assert(lnk);
 
+    /* Initialize structure and set (default) common info for link */
+    lnk->type         = H5L_TYPE_ERROR;
+    lnk->corder_valid = false; /* Creation order not valid for this link */
+    lnk->corder       = 0;
+    lnk->cset         = H5F_DEFAULT_CSET;
+    lnk->name         = NULL;
+
     /* Get the size of the heap block */
     block_size = H5HL_heap_get_size(heap);
 
     /* Get pointer to link's name in the heap */
     if (NULL == (name = (const char *)H5HL_offset_into(heap, ent->name_off)))
         HGOTO_ERROR(H5E_SYM, H5E_CANTGET, FAIL, "unable to get symbol table link name");
 
-    /* Set (default) common info for link */
-    lnk->cset         = H5F_DEFAULT_CSET;
-    lnk->corder       = 0;
-    lnk->corder_valid = false; /* Creation order not valid for this link */
     if (NULL == (lnk->name = H5MM_strndup(name, (block_size - ent->name_off))))
         HGOTO_ERROR(H5E_SYM, H5E_CANTGET, FAIL, "unable to duplicate link name");
+    if (!*lnk->name)
+        HGOTO_ERROR(H5E_SYM, H5E_BADVALUE, FAIL, "invalid link name");
 
     /* Object is a symbolic or hard link */
     if (ent->type == H5G_CACHED_SLINK) {

src/H5Gloc.c

@@ -410,9 +410,12 @@ H5G_loc_find(const H5G_loc_t *loc, const char *name, H5G_loc_t *obj_loc /*out*/)
 
     /* Check args. */
     assert(loc);
-    assert(name && *name);
+    assert(name);
     assert(obj_loc);
 
+    if (!*name)
+        HGOTO_ERROR(H5E_SYM, H5E_BADVALUE, FAIL, "invalid object name");
+
     /* Set up user data for locating object */
     udata.loc = obj_loc;
 

src/H5T.c

@@ -3393,6 +3393,7 @@ H5T__create(H5T_class_t type, size_t size)
             /* Copy the default string datatype */
             if (NULL == (dt = H5T_copy(origin_dt, H5T_COPY_TRANSIENT)))
                 HGOTO_ERROR(H5E_DATATYPE, H5E_CANTINIT, NULL, "unable to copy");
+            dt->shared->type = type;
 
             /* Modify the datatype */
             if (H5T__set_size(dt, size) < 0)
@@ -4577,6 +4578,8 @@ H5T_cmp(const H5T_t *dt1, const H5T_t *dt2, bool superset)
             /*
              * Compound data types...
              */
+            if (dt1->shared->u.compnd.nmembs == 0 && dt2->shared->u.compnd.nmembs == 0)
+                HGOTO_DONE(0);
             if (dt1->shared->u.compnd.nmembs < dt2->shared->u.compnd.nmembs)
                 HGOTO_DONE(-1);
             if (dt1->shared->u.compnd.nmembs > dt2->shared->u.compnd.nmembs)
@@ -4619,11 +4622,13 @@ H5T_cmp(const H5T_t *dt1, const H5T_t *dt2, bool superset)
 
 #ifdef H5T_DEBUG
             /* I don't quite trust the code above yet :-)  --RPM */
-            for (u = 0; u < dt1->shared->u.compnd.nmembs - 1; u++) {
-                assert(strcmp(dt1->shared->u.compnd.memb[idx1[u]].name,
-                              dt1->shared->u.compnd.memb[idx1[u + 1]].name));
-                assert(strcmp(dt2->shared->u.compnd.memb[idx2[u]].name,
-                              dt2->shared->u.compnd.memb[idx2[u + 1]].name));
+            if (dt1->shared->u.compnd.nmembs > 0) {
+                for (u = 0; u < dt1->shared->u.compnd.nmembs - 1; u++) {
+                    assert(strcmp(dt1->shared->u.compnd.memb[idx1[u]].name,
+                                  dt1->shared->u.compnd.memb[idx1[u + 1]].name));
+                    assert(strcmp(dt2->shared->u.compnd.memb[idx2[u]].name,
+                                  dt2->shared->u.compnd.memb[idx2[u + 1]].name));
+                }
             }
 #endif
 
@@ -4659,6 +4664,8 @@ H5T_cmp(const H5T_t *dt1, const H5T_t *dt2, bool superset)
             /*
              * Enumeration data types...
              */
+            if (dt1->shared->u.enumer.nmembs == 0 && dt2->shared->u.enumer.nmembs == 0)
+                HGOTO_DONE(0);
 
             /* If we are doing a "superset" comparison, dt2 is allowed to have
              * more members than dt1
@@ -4716,9 +4723,13 @@ H5T_cmp(const H5T_t *dt1, const H5T_t *dt2, bool superset)
 
 #ifdef H5T_DEBUG
             /* I don't quite trust the code above yet :-)  --RPM */
-            for (u = 0; u < dt1->shared->u.enumer.nmembs - 1; u++) {
-                assert(strcmp(dt1->shared->u.enumer.name[idx1[u]], dt1->shared->u.enumer.name[idx1[u + 1]]));
-                assert(strcmp(dt2->shared->u.enumer.name[idx2[u]], dt2->shared->u.enumer.name[idx2[u + 1]]));
+            if (dt1->shared->u.enumer.nmembs > 0) {
+                for (u = 0; u < dt1->shared->u.enumer.nmembs - 1; u++) {
+                    assert(
+                        strcmp(dt1->shared->u.enumer.name[idx1[u]], dt1->shared->u.enumer.name[idx1[u + 1]]));
+                    assert(
+                        strcmp(dt2->shared->u.enumer.name[idx2[u]], dt2->shared->u.enumer.name[idx2[u + 1]]));
+                }
             }
 #endif
 
@@ -6784,24 +6795,13 @@ H5T_is_numeric_with_unusual_unused_bits(const H5T_t *dt)
     /* Is the correct type? */
     if (H5T_INTEGER == dt->shared->type || H5T_FLOAT == dt->shared->type ||
         H5T_BITFIELD == dt->shared->type) {
-#if LDBL_MANT_DIG == 106
-        /* This currently won't work for the IBM long double type */
-        if (H5T_FLOAT == dt->shared->type && dt->shared->size == 16 &&
-            (dt->shared->u.atomic.prec == 64 || dt->shared->u.atomic.prec == 128))
-            HGOTO_DONE(false);
-#endif
 
         /* Has unused bits? */
-        if (dt->shared->u.atomic.prec < (dt->shared->size * 8)) {
-            unsigned surround_bits =
-                1U << (1 + H5VM_log2_gen((dt->shared->u.atomic.prec + dt->shared->u.atomic.offset) - 1));
-
+        if (dt->shared->size > 1 && dt->shared->u.atomic.prec < (dt->shared->size * 8))
             /* Unused bits are unusually large? */
-            if (dt->shared->size > 1 && ((dt->shared->size * 8) > surround_bits))
-                HGOTO_DONE(true);
-        }
+            ret_value =
+                (dt->shared->size * 8) > (2 * (dt->shared->u.atomic.prec + dt->shared->u.atomic.offset));
     }
 
-done:
     FUNC_LEAVE_NOAPI(ret_value)
 } /* end H5T_is_numeric_with_unusual_unused_bits() */