New translations en_us.h (Swedish)

src/lang/sv_SE.h

@@ -0,0 +1,242 @@
+// This translation file is maintained on https://crowdin.com/project/openhasp/
+// Do not edit directly!
+
+#ifndef HASP_LANG_SV_SE_H
+#define HASP_LANG_SV_SE_H
+
+#define D_ISO_LANG_CODE "sv-SE"
+
+#define D_USERNAME "Användarnamn:"
+#define D_PASSWORD "Lösenord:"
+#define D_SSID "Ssid:"
+#define D_YES "Ja"
+#define D_NO "Nej"
+
+#define D_ERROR_OUT_OF_MEMORY "Out of memory"
+#define D_ERROR_UNKNOWN "Unknown error"
+
+#define D_CONFIG_NOT_CHANGED "Settings did not change"
+#define D_CONFIG_CHANGED "Settings changed"
+#define D_CONFIG_LOADED "Settings loaded"
+
+#define D_FILE_LOADING "Loading %s"
+#define D_FILE_LOADED "Loaded %s"
+#define D_FILE_LOAD_FAILED "Failed to load %s"
+#define D_FILE_SAVING "Saving %s"
+#define D_FILE_SAVED "Saved %s"
+#define D_FILE_SAVE_FAILED "Failed to save %s"
+#define D_FILE_NOT_FOUND "File not found"
+#define D_FILE_SIZE_BYTES "bytes"
+#define D_FILE_SIZE_KILOBYTES "KiB"
+#define D_FILE_SIZE_MEGABYTES "MiB"
+#define D_FILE_SIZE_GIGABYTES "GiB"
+#define D_FILE_SIZE_TERABYTES "TiB"
+#define D_FILE_SIZE_DIVIDER 1024 // kibi or kilo bytes
+#define D_DECIMAL_POINT "."      // decimal comma or point
+
+#define D_SERVICE_STARTING "Starting..."
+#define D_SERVICE_STARTED "Started"
+#define D_SERVICE_START_FAILED "Failed to start"
+#define D_SERVICE_STOPPED "Stopped"
+#define D_SERVICE_DISABLED "Disabled"
+#define D_SERVICE_CONNECTED "Connected"
+#define D_SERVICE_DISCONNECTED "Disconnected"
+
+#define D_SETTING_ENABLED "Enabled"
+#define D_SETTING_DISABLED "Disabled"
+#define D_SETTING_DEFAULT "Default"
+
+#define D_NETWORK_IP_ADDRESS_RECEIVED "Received IP address %s"
+#define D_NETWORK_ONLINE "online"
+#define D_NETWORK_OFFLINE "offline"
+#define D_NETWORK_CONNECTION_FAILED "Connection failed"
+#define D_NETWORK_CONNECTION_UNAUTHORIZED "Authorization failed"
+
+#define D_MQTT_DEFAULT_NAME "plate_%s"
+#define D_MQTT_CONNECTING "Connecting..."
+#define D_MQTT_CONNECTED "Connected to broker %s as clientID %s"
+#define D_MQTT_NOT_CONNECTED "Not connected ???"
+#define D_MQTT_DISCONNECTING "Disconnecting..."
+#define D_MQTT_DISCONNECTED "Disconnected"
+#define D_MQTT_RECONNECTING "Disconnected from broker, reconnection..."
+#define D_MQTT_NOT_CONFIGURED "Broker not configured"
+#define D_MQTT_STARTED "Started: %d bytes"
+#define D_MQTT_FAILED "Failed:"
+#define D_MQTT_INVALID_TOPIC "Message has invalid topic"
+#define D_MQTT_SUBSCRIBED "Subscribed to %s"
+#define D_MQTT_NOT_SUBSCRIBED "Failed to subscribe to %s"
+#define D_MQTT_HA_AUTO_DISCOVERY "Register HA auto-discovery"
+#define D_MQTT_PAYLOAD_TOO_LONG "Payload too long (%u bytes)"
+
+#define D_TELNET_CLOSING_CONNECTION "Closing session from %s"
+#define D_TELNET_CLIENT_LOGIN_FROM "Client login from %s"
+#define D_TELNET_CLIENT_CONNECT_FROM "Client connected from %s"
+#define D_TELNET_CLIENT_NOT_CONNECTED "Client NOT connected"
+#define D_TELNET_INCORRECT_LOGIN_ATTEMPT "Incorrect login attempt from %s"
+#define D_TELNET_STARTED "Telnet console started"
+#define D_TELNET_FAILED "Failed to start telnet console"
+#define D_TELNET_CLIENT_CONNECTED "Client connected"
+#define D_TELNET_CLIENT_REJECTED "Client rejected"
+
+#define D_HASP_INVALID_PAGE "Invalid page %u"
+#define D_HASP_INVALID_LAYER "Cannot clear system layer"
+#define D_HASP_CHANGE_PAGE "Changing page to %u"
+#define D_HASP_CLEAR_PAGE "Clearing page %u"
+
+#define D_OBJECT_DELETED "Object deleted"
+#define D_OBJECT_UNKNOWN "Unknown object"
+#define D_OBJECT_MISMATCH "Objects DO NOT match!"
+#define D_OBJECT_LOST "Lost object!"
+#define D_OBJECT_CREATE_FAILED "Failed to create object id %u"
+#define D_OBJECT_PAGE_UNKNOWN "Page ID %u not defined"
+#define D_OBJECT_EVENT_UNKNOWN "Unknown Event %d"
+
+#define D_ATTRIBUTE_UNKNOWN "Unknown property %s"
+// D_ATTRIBUTE_OBSOLETE D_ATTRIBUTE_INSTEAD can be used together or just D_ATTRIBUTE_OBSOLETE alone
+#define D_ATTRIBUTE_OBSOLETE "%s is obsolete"
+#define D_ATTRIBUTE_INSTEAD ", use %s instead"
+#define D_ATTRIBUTE_READ_ONLY "%s is read-only"
+#define D_ATTRIBUTE_PAGE_METHOD_INVALID "Unable to call %s on a page"
+#define D_ATTRIBUTE_ALIGN_INVALID "Invalid align property: %s"
+#define D_ATTRIBUTE_COLOR_INVALID "Invalid color property: %s"
+#define D_ATTRIBUTE_LONG_MODE_INVALID "Invalid long mode: %s"
+
+#define D_OOBE_SSID_VALIDATED "SSID %s validated"
+#define D_OOBE_AUTO_CALIBRATE "Auto calibrate enabled"
+#define D_OOBE_CALIBRATED "Already calibrated"
+
+#define D_DISPATCH_COMMAND_NOT_FOUND "Command '%s' not found"
+#define D_DISPATCH_INVALID_PAGE "Invalid page %s"
+#define D_DISPATCH_REBOOT "Rebooting the MCU now!"
+
+#define D_JSON_FAILED "JSON parsing failed:"
+#define D_JSONL_FAILED "JSONL parsing failed at line %u"
+#define D_JSONL_SUCCEEDED "Jsonl fully parsed"
+
+#define D_OTA_CHECK_UPDATE "Trying update URL: %s"
+#define D_OTA_CHECK_COMPLETE "Update check complete"
+#define D_OTA_CHECK_FAILED "Update check failed: %s"
+#define D_OTA_UPDATE_FIRMWARE "OTA Firmware Update"
+#define D_OTA_UPDATE_COMPLETE "OTA Update complete"
+#define D_OTA_UPDATE_APPLY "Applying Firmware & Reboot"
+#define D_OTA_UPDATE_FAILED "OTA Update failed"
+#define D_OTA_UPDATING_FIRMWARE "Updating firmware..."
+#define D_OTA_UPDATING_FILESYSTEM "Updating filesystem..."
+
+#define D_HTTP_HASP_DESIGN "HASP Design"
+#define D_HTTP_INFORMATION "Information"
+#define D_HTTP_HTTP_SETTINGS "HTTP Settings"
+#define D_HTTP_FTP_SETTINGS "FTP Settings"
+#define D_HTTP_WIFI_SETTINGS "Wifi Settings"
+#define D_HTTP_WIREGUARD_SETTINGS "WireGuard Settings"
+#define D_HTTP_MQTT_SETTINGS "MQTT Settings"
+#define D_HTTP_GPIO_SETTINGS "GPIO Settings"
+#define D_HTTP_MDNS_SETTINGS "mDNS Settings"
+#define D_HTTP_TELNET_SETTINGS "Telnet Settings"
+#define D_HTTP_DEBUG_SETTINGS "Debug Settings"
+#define D_HTTP_GUI_SETTINGS "Display Settings"
+#define D_HTTP_SAVE_SETTINGS "Save Settings"
+#define D_HTTP_UPLOAD_FILE "Upload File"
+#define D_HTTP_ERASE_DEVICE "Reset All Settings"
+#define D_HTTP_ADD_GPIO "Add New Pin"
+#define D_HTTP_BACK "Back"
+#define D_HTTP_REFRESH "Refresh"
+#define D_HTTP_PREV_PAGE "Prev Page"
+#define D_HTTP_NEXT_PAGE "Next Page"
+#define D_HTTP_CALIBRATE "Calibrate"
+#define D_HTTP_ANTIBURN "Run Anti Burn-in"
+#define D_HTTP_SCREENSHOT "Screenshot"
+#define D_HTTP_FILE_BROWSER "File Editor"
+#define D_HTTP_FIRMWARE_UPGRADE "Firmware Upgrade"
+#define D_HTTP_UPDATE_FIRMWARE "Update Firmware"
+#define D_HTTP_FACTORY_RESET "Factory Reset"
+#define D_HTTP_MAIN_MENU "Main Menu"
+#define D_HTTP_REBOOT "Restart"
+#define D_HTTP_CONFIGURATION "Configuration"
+#define D_HTTP_CONFIG_CHANGED                                                                                          \
+    "The configuration has changed, please click <a href='/reboot'>Restart</a> to save changes to flash."
+#define D_HTTP_SENDING_PAGE "Sent %S page to %s"
+#define D_HTTP_FOOTER "by Francis Van Roie"
+
+#define D_INFO_VERSION "Version"
+#define D_INFO_BUILD_DATETIME "Build DateTime"
+#define D_INFO_ENVIRONMENT "Environment"
+#define D_INFO_UPTIME "Uptime"
+#define D_INFO_FREE_HEAP "Free Heap"
+#define D_INFO_FREE_BLOCK "Free Block"
+#define D_INFO_DEVICE_MEMORY "Device Memory"
+#define D_INFO_LVGL_MEMORY "LVGL Memory"
+#define D_INFO_TOTAL_MEMORY "Total"
+#define D_INFO_FREE_MEMORY "Free"
+#define D_INFO_FRAGMENTATION "Fragmentation"
+#define D_INFO_PSRAM_FREE "PSRam Free"
+#define D_INFO_PSRAM_SIZE "PSRam Size"
+#define D_INFO_FLASH_SIZE "Flash Size"
+#define D_INFO_SKETCH_USED "Program Size Used"
+#define D_INFO_SKETCH_FREE "Program Size Free"
+#define D_INFO_FS_SIZE "Filesystem Size"
+#define D_INFO_FS_USED "Filesystem Used"
+#define D_INFO_FS_FREE "Filesystem Free"
+#define D_INFO_MODULE "Module"
+#define D_INFO_MODEL "Model"
+#define D_INFO_FREQUENCY "Frequency"
+#define D_INFO_CORE_VERSION "Core Version"
+#define D_INFO_RESET_REASON "Reset Reason"
+#define D_INFO_STATUS "Status"
+#define D_INFO_SERVER "Server"
+#define D_INFO_USERNAME "Username"
+#define D_INFO_CLIENTID "Client ID"
+// #define D_INFO_CONNECTED "Connected"
+// #define D_INFO_DISCONNECTED "Disconnected"
+#define D_INFO_RECEIVED "Received"
+#define D_INFO_PUBLISHED "Published"
+#define D_INFO_FAILED "Failed"
+#define D_INFO_ETHERNET "Ethernet"
+#define D_INFO_WIFI "Wifi"
+#define D_INFO_WIREGUARD "WireGuard"
+#define D_INFO_LINK_SPEED "Link Speed"
+#define D_INFO_FULL_DUPLEX "Full Duplex"
+#define D_INFO_BSSID "BSSID"
+#define D_INFO_SSID "SSID"
+#define D_INFO_RSSI "Signal Strength"
+#define D_INFO_IP_ADDRESS "IP Address"
+#define D_INFO_MAC_ADDRESS "MAC Address"
+#define D_INFO_GATEWAY "Gateway"
+#define D_INFO_DNS_SERVER "DNS Server"
+#define D_INFO_ENDPOINT_IP "Endpoint IP"
+#define D_INFO_ENDPOINT_PORT "Endpoint Port"
+
+#define D_OOBE_MSG "Tap the screen to setup WiFi or connect to this Access Point:"
+#define D_OOBE_SCAN_TO_CONNECT "Scan to connect"
+
+#define D_WIFI_CONNECTING_TO "Connecting to %s"
+#define D_WIFI_CONNECTED_TO "Connected to %s, requesting IP..."
+#define D_WIFI_RSSI_EXCELLENT "Excellent"
+#define D_WIFI_RSSI_GOOD "Good"
+#define D_WIFI_RSSI_FAIR "Fair"
+#define D_WIFI_RSSI_WEAK "Weak"
+#define D_WIFI_RSSI_BAD "Very bad"
+
+#define D_WG_INITIALIZED "Initialized"
+#define D_WG_BAD_CONFIG "Missing or bad configuration"
+
+#define D_GPIO_SWITCH "Switch"
+#define D_GPIO_BUTTON "Push Button"
+#define D_GPIO_TOUCH "Capacitive Touch"
+#define D_GPIO_LED "Led"
+#define D_GPIO_LED_R "Mood Red"
+#define D_GPIO_LED_G "Mood Green"
+#define D_GPIO_LED_B "Mood Blue"
+#define D_GPIO_POWER_RELAY "Power Relay"
+#define D_GPIO_LIGHT_RELAY "Light Relay"
+#define D_GPIO_PWM "PWM"
+#define D_GPIO_DAC "DAC"
+#define D_GPIO_SERIAL_DIMMER "Serial Dimmer"
+#define D_GPIO_UNKNOWN "Unknown"
+#define D_GPIO_PIN "Pin"
+#define D_GPIO_GROUP "Group"
+#define D_GPIO_GROUP_NONE "None"
+#define D_GPIO_STATE_NORMAL "Normal"
+#define D_GPIO_STATE_INVERTED "Inverted"
+
+#endif