Update

Guilouz · Nov 28, 2024 · 7eadccd · 7eadccd
1 parent 45a6896
commit 7eadccd
Show file tree

Hide file tree

Showing 8 changed files with 1,760 additions and 0 deletions.
diff --git a/docs/firmwares/install-and-update-rooted-firmware-ender3.md b/docs/firmwares/install-and-update-rooted-firmware-ender3.md
@@ -9,10 +9,14 @@ This guide explain how to install firmware and enable Root access.
 - <b><u>Ender-3 V3:</u></b>
 
     &nbsp;&nbsp;&nbsp;&nbsp;:material-google-drive: [1.2.3.10 (Google Drive)](https://drive.google.com/file/d/10C3l2vppEA_tmbGjGqz5hRkYXvc29V0D/view?usp=drive_link) / :material-note-text: [Changelog](https://raw.githubusercontent.com/Guilouz/Creality-Helper-Script-Wiki/main/downloads/Changelogs/Ender-3V3/Changelog_1.2.3.10.txt)
+
+    &nbsp;&nbsp;&nbsp;&nbsp;:material-google-drive: [1.2.3.21 (Google Drive)](https://drive.google.com/file/d/1M-mxhIKSw2jmhW5YX_K6QvIhRx0EJ6UO/view?usp=drive_link) / :material-note-text: [Changelog](https://raw.githubusercontent.com/Guilouz/Creality-Helper-Script-Wiki/main/downloads/Changelogs/Ender-3V3/Changelog_1.2.3.21.txt)
 
 - <b><u>Ender-3 V3 Plus:</u></b>
 
     &nbsp;&nbsp;&nbsp;&nbsp;:material-google-drive: [1.2.3.8 (Google Drive)](https://drive.google.com/file/d/12tCO7zBVLqz-Wrbc7WgQnIuNbYdtdhdl/view?usp=drive_link) / :material-note-text: [Changelog](https://raw.githubusercontent.com/Guilouz/Creality-Helper-Script-Wiki/main/downloads/Changelogs/Ender-3V3-Plus/Changelog_1.2.3.8.txt)
+
+    &nbsp;&nbsp;&nbsp;&nbsp;:material-google-drive: [1.2.3.21 (Google Drive)](https://drive.google.com/file/d/10EOuyyhm4bGDt1yL7Vga5ZkZlgIlJsb0/view?usp=drive_link) / :material-note-text: [Changelog](https://raw.githubusercontent.com/Guilouz/Creality-Helper-Script-Wiki/main/downloads/Changelogs/Ender-3V3-Plus/Changelog_1.2.3.21.txt)
 
 
 ## Installation & Update

diff --git a/downloads/Changelogs/Ender-3V3-Plus/Changelog_1.2.3.21.txt b/downloads/Changelogs/Ender-3V3-Plus/Changelog_1.2.3.21.txt
@@ -0,0 +1,9 @@
+Version Update V1.2.3.21
+
+1. Add Z-axis offset save control and risk reminder confirmation pop-up interface.
+2. Boot animation: change the page to a green theme.
+3. Fixed frequent disconnections of the cloud camera, optimized WebRTC connection speed.
+4. Adjusted the camera AI interface layout.
+5. Adjusted leveling anomaly prompts.
+6. Fixed other known UI issues.
+7. Updated privacy policy text.
diff --git a/downloads/Changelogs/Ender-3V3/Changelog_1.2.3.21.txt b/downloads/Changelogs/Ender-3V3/Changelog_1.2.3.21.txt
@@ -0,0 +1,9 @@
+Version Update V1.2.3.21
+
+1. Add Z-axis offset save control and risk reminder confirmation pop-up interface.
+2. Boot animation: change the page to a green theme.
+3. Fixed frequent disconnections of the cloud camera, optimized WebRTC connection speed.
+4. Adjusted the camera AI interface layout.
+5. Adjusted leveling anomaly prompts.
+6. Fixed other known UI issues.
+7. Updated privacy policy text.
diff --git a/downloads/Stock Config Files/Ender-3V3/1.2.3.21/factory_printer.cfg b/downloads/Stock Config Files/Ender-3V3/1.2.3.21/factory_printer.cfg
@@ -0,0 +1,351 @@
+# K1-MAX
+# Printer_size: 300x300x300
+# Version: v1.0.1
+# CreateDate: 2023/03/21
+# Nozzle_mcu: chip: GD32F303CBT6
+#             version: K1-NOZZLE-M_V12
+# Leveling_mcu: chip: GD32E230F8P6
+#             version: K1-MAX-L-V11
+# mcu: chip: GD32F303RET6
+#      version: CR4CU220812S12
+
+[include sensorless.cfg]
+[include gcode_macro.cfg]
+[include printer_params.cfg]
+
+[mcu]
+serial: /dev/ttyS7
+baud: 230400
+restart_method: command
+
+[mcu nozzle_mcu]
+serial: /dev/ttyS1
+baud: 230400
+restart_method: command
+
+[mcu leveling_mcu]
+serial: /dev/ttyS9
+baud: 230400
+restart_method: command
+
+[verify_heater extruder]
+[verify_heater heater_bed]
+
+[mcu rpi]
+serial: /tmp/klipper_host_mcu
+
+[bl24c16f]
+i2c_mcu: rpi
+i2c_bus: i2c.2
+i2c_speed: 400000
+
+[idle_timeout]
+timeout: 99999999
+
+[virtual_sdcard]
+path: /usr/data/printer_data/gcodes
+
+[gcode_arcs]
+resolution: 1.0
+
+[temperature_sensor mcu_temp]
+sensor_type: temperature_mcu
+min_temp: 0
+max_temp: 100
+
+[temperature_sensor chamber_temp]
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC5
+min_temp: -273
+max_temp: 999
+
+[stepper_x]
+step_pin: PC2
+dir_pin: !PB9
+enable_pin: !PC3
+microsteps: 32
+rotation_distance: 72
+endstop_pin: tmc2209_stepper_x:virtual_endstop
+position_endstop: 306.5
+position_min: -2
+position_max: 306.5
+homing_speed: 36
+homing_retract_dist:0
+
+[tmc2209 stepper_x]
+uart_pin:PA9
+interpolate: True
+run_current:1.5
+hold_current:1.0
+sense_resistor: 0.100
+stealthchop_threshold: 0
+uart_address:3
+diag_pin: ^PB12
+# driver_IHOLDDELAY: 8
+# driver_TPOWERDOWN: 20
+# driver_TBL: 1
+# driver_TOFF: 1
+# driver_HEND: 0
+# driver_HSTRT: 7
+driver_SGTHRS: 65
+
+[stepper_y]
+step_pin: PB8
+dir_pin: !PB7
+enable_pin: !PC3
+microsteps: 32
+rotation_distance: 72
+endstop_pin: tmc2209_stepper_y:virtual_endstop
+position_endstop: -2
+position_min: -2
+position_max: 306
+homing_speed: 36
+homing_retract_dist:0
+
+[tmc2209 stepper_y]
+uart_pin:PA10
+interpolate: True
+run_current:1.5
+hold_current:1.0
+sense_resistor: 0.100
+stealthchop_threshold: 0
+uart_address:3
+diag_pin: ^PB13
+# driver_IHOLDDELAY: 8
+# driver_TPOWERDOWN: 20
+# driver_TBL: 1
+# driver_TOFF: 1
+# driver_HEND: 0
+# driver_HSTRT: 7
+driver_SGTHRS: 65
+
+[stepper_z]
+step_pin: PB6
+dir_pin: !PB5
+enable_pin: !PC3
+microsteps: 16
+rotation_distance:8
+gear_ratio: 64:20
+endstop_pin: tmc2209_stepper_z:virtual_endstop# PA15   #probe:z_virtual_endstop
+position_endstop: 0
+position_max: 305
+position_min: -10
+homing_speed: 10
+second_homing_speed: 1
+homing_retract_dist: 2.0
+
+[tmc2209 stepper_z]
+uart_pin: PA11
+uart_address: 3
+run_current: 0.8
+diag_pin: ^PB14
+stealthchop_threshold: 0
+sense_resistor: 0.100
+# driver_IHOLDDELAY: 8
+# driver_TPOWERDOWN: 20
+# driver_TBL: 1
+# driver_TOFF: 1
+# driver_HEND: 2
+# driver_HSTRT: 2
+driver_SGTHRS: 0
+
+[extruder]
+max_extrude_only_distance: 1000.0
+max_extrude_cross_section: 80
+step_pin: nozzle_mcu:PB1
+dir_pin: nozzle_mcu:PB0
+enable_pin: !nozzle_mcu:PB2
+microsteps: 16
+rotation_distance: 6.9
+nozzle_diameter: 0.400
+filament_diameter: 1.750
+heater_pin: nozzle_mcu:PB7
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: nozzle_mcu:PA0
+pressure_advance: 0.04
+pressure_advance_smooth_time: 0.040
+control: pid
+pid_Kp: 25.013
+pid_Ki: 2.566
+pid_Kd: 60.966
+min_temp: 0
+max_temp: 320
+
+[tmc2209 extruder]
+uart_pin: nozzle_mcu: PB11
+tx_pin: nozzle_mcu: PB10
+uart_address: 3
+run_current: 0.5
+sense_resistor: 0.150
+stealthchop_threshold: 0
+# driver_IHOLDDELAY: 8
+# driver_TPOWERDOWN: 20
+# driver_TBL: 2
+# driver_TOFF: 3
+# driver_HEND: 0
+# driver_HSTRT: 5
+
+[heater_bed]
+heater_pin: PC12
+sensor_type: EPCOS 100K B57560G104F
+sensor_pin: PC4
+control: pid
+pid_Kp: 54.901
+pid_Ki: 1.142
+pid_Kd: 375.483
+min_temp: 0
+max_temp: 140
+
+[filament_switch_sensor filament_sensor]
+pause_on_runout: true
+switch_pin: ^!PC15
+
+[multi_pin heater_fans]
+pins:nozzle_mcu:PB5
+
+[heater_fan hotend_fan]
+pin: multi_pin:heater_fans
+heater: extruder
+heater_temp: 40
+
+[static_digital_output my_fan_output_pins]
+pins: nozzle_mcu: PB6
+
+[output_pin fan0]
+pin: nozzle_mcu: PB8
+pwm: True
+cycle_time: 0.0100
+hardware_pwm: false
+value: 0.00
+scale: 255
+shutdown_value: 0.0
+
+[output_pin fan1]
+pin: PC0
+pwm: True
+cycle_time: 0.0100
+hardware_pwm: false
+value: 0.00
+scale: 255
+shutdown_value: 0.0
+
+[output_pin fan2]
+pin: PB1
+pwm: True
+cycle_time: 0.0100
+hardware_pwm: false
+value: 0.00
+scale: 255
+shutdown_value: 0.0
+
+[output_pin LED]
+pin:PB0
+pwm: True
+cycle_time: 0.010
+
+[output_pin PA0]
+pin:PA0
+pwm: True
+cycle_time: 0.010
+
+[output_pin PB2]
+pin:PB2
+pwm: True
+cycle_time: 0.010
+
+[output_pin PB10]
+pin:PB10
+pwm: True
+cycle_time: 0.010
+
+[output_pin PC8]
+pin:PC8
+pwm: True
+cycle_time: 0.010
+
+[output_pin PC9]
+pin:PC9
+pwm: True
+cycle_time: 0.010
+
+[adxl345]
+cs_pin: nozzle_mcu:PA4
+spi_speed: 5000000
+axes_map: x,-z,y
+spi_software_sclk_pin: nozzle_mcu:PA5
+spi_software_mosi_pin: nozzle_mcu:PA7
+spi_software_miso_pin: nozzle_mcu:PA6
+
+[resonance_tester]
+accel_chip: adxl345
+accel_per_hz: 50
+probe_points:
+   150,150,10
+
+[prtouch_v2]
+z_offset: 0
+step_base:2
+pres_cnt: 4
+#show_msg: True
+noz_ex_com: 0.1
+tilt_corr_dis: 0.00
+#pres0_clk_pins: leveling_mcu:PA5
+#pres0_sdo_pins: leveling_mcu:PA1
+#pres1_clk_pins: leveling_mcu:PA2
+#pres1_sdo_pins: leveling_mcu:PA0
+#pres2_clk_pins: leveling_mcu:PA6
+#pres2_sdo_pins: leveling_mcu:PA3
+#pres3_clk_pins: leveling_mcu:PA7
+#pres3_sdo_pins: leveling_mcu:PA4
+#step_swap_pin: mcu:PC10
+#pres_swap_pin: leveling_mcu:PB1
+pres0_clk_pins: leveling_mcu:PB13
+pres0_sdo_pins: leveling_mcu:PB12
+pres1_clk_pins: leveling_mcu:PB15
+pres1_sdo_pins: leveling_mcu:PB14
+pres2_clk_pins: leveling_mcu:PA9
+pres2_sdo_pins: leveling_mcu:PA8
+pres3_clk_pins: leveling_mcu:PA11
+pres3_sdo_pins: leveling_mcu:PA10
+step_swap_pin: mcu:PC10
+pres_swap_pin: leveling_mcu:PA12
+best_above_z: 2
+low_spd_nul:2
+rdy_xy_spd:400
+clr_noz_start_x: 85
+clr_noz_start_y: 219
+clr_noz_len_x: 50
+clr_noz_len_y: 2
+tri_min_hold:2000
+tri_hftr_cut:1
+
+# correct_tri_hold: 6000
+# correct_step_mm: 0.02
+z_high_default: -264.0
+min_z_pos: -250
+retract_z_dist: 230
+retract_z_speed: 3600
+
+
+[bed_mesh]
+speed: 150
+mesh_min: 5,5
+mesh_max: 295,295
+probe_count: 5,5
+fade_start: 3.0
+fade_end: 10.0
+
+[display_status]
+
+[printer]
+kinematics: corexy
+max_velocity: 1000
+max_accel: 20000
+max_accel_to_decel: 10000
+max_z_velocity: 20
+square_corner_velocity: 5.0
+max_z_accel: 300
+
+
+
+[pause_resume]