v0.2.9
Pre-release
Pre-release
Changes:
- Turn capslock LED off when SLEEP# is low
- Use https://keyboard.frame.work/ for customizing key mapping and RGB backlight.
How to update:
On Windows
Use the .exe matching your keyboard.
Note:
- ANSI looks like this: https://frame.work/tw/en/products/keyboard-module?v=FRAKDW00AA
- ISO looks like this: https://frame.work/tw/en/products/keyboard-module?v=FRAKDW00AB
On any OS (UF2)
- Download the .uf2 file matching your keyboard.
- Slide touchpad down, until the input deck powers off (you can see the backlights turning off)
- Hold left and right ALT keys pressed, while sliding the touchpad back up again
- The keyboard is now in bootloader mode, use the touchpad to drag the .uf2 file onto the RPI-2 drive
- The keyboard will automatically update itself, restart and be functional again after a few seconds
For numpad/macropad hold down keys 1 and 6. Please refer to the layout here: Numpad, Macropad
DO NOT update keyboard and macropad/numpad at the same time. If they are both in bootloader mode, it's impossible to distinguish them. Do not flash the wrong firmware.
Completely erase firmware and all settings
The modules keep persistent settings. Firmware updates do not erase them.
If you want to factory reset your module please use the UF2 method descrcibed above, first with erase_flash.uf2 and then with the matching .uf2 file for your keyboard.
It will take a while because it erases the entire flash, without any optimizations.
Do not do this unnecessarily to avoid wearing out the flash.