Beta v3 firmware update #47
Comments
|
The current SRn firmware can be used normally and does not require any updates if you don't need the new function of the V3 |
|
Sorry but this is not the question I'm asking.
As I need the new functionality as especially because your 1.1.14 isrm is
buggy (confirmed by you) mu question is
If I update to v 3 my SR receivers, will I have to take all these receivers
out to recalibrate.
Could you please kindly answer that
…On Fri, 13 Sept 2024, 15:23 LiNan, ***@***.***> wrote:
The current SRn firmware can be used normally and does not require any
updates if you don't need the new function of the V3
—
Reply to this email directly, view it on GitHub
<#47 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AGQTSNUST5XSZGGFX26ILT3ZWJZFZAVCNFSM6AAAAABOEPDIJCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNBYGA2TKNJZHA>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
if you used ACCESS SRx Version 1.0.11, you can only upgrade your Tx to V3, they are compatible. otherwise，You need to update both the RX and TX to V3.0 |
|
Thank you, if I update Archer Plus SR8 to v3, do I need to recalibrate it
(ie take it out from the model)
…On Fri, 13 Sept 2024, 16:18 LiNan, ***@***.***> wrote:
Sorry but this is not the question I'm asking. As I need the new
functionality as especially because your 1.1.14 isrm is buggy (confirmed by
you) mu question is If I update to v 3 my SR receivers, will I have to take
all these receivers out to recalibrate. Could you please kindly answer that
… <#m_-4417743000043858591_>
On Fri, 13 Sept 2024, 15:23 LiNan, *@*.*> wrote: The current SRn firmware
can be used normally and does not require any updates if you don't need the
new function of the V3 — Reply to this email directly, view it on GitHub
<#47 (comment)
<#47 (comment)>>,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/AGQTSNUST5XSZGGFX26ILT3ZWJZFZAVCNFSM6AAAAABOEPDIJCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNBYGA2TKNJZHA
<https://github.com/notifications/unsubscribe-auth/AGQTSNUST5XSZGGFX26ILT3ZWJZFZAVCNFSM6AAAAABOEPDIJCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNBYGA2TKNJZHA>
. You are receiving this because you authored the thread.Message ID: @.*>
if you used ACCESS SRx Version 1.0.11, you can only upgrade your Tx to V3,
they are compatible. otherwise，You need to update both the RX and TX to V3.0
—
Reply to this email directly, view it on GitHub
<#47 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AGQTSNV3YICEUBM7P2Y4I6DZWJ7VFAVCNFSM6AAAAABOEPDIJCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNBYGEZDCNRVHE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
After upgrading the receiver, you need to rebind and turn on the Gyro again, check the parameter, In theory, there is no need for recalibration, but I cannot guarantee 100% |
|
Thanks that answers my question. May I please suggest FrSky - for future rx
firmware upgrades- takes particular care of the need to recalibrate the rx
after firmware upgrade and either provide a clear instruction when
calibration settings are erased and recalibration is needed or better
design the update process so that recalibration is NOT required.
That would be very appreciated and welcomed. Thanks
…On Fri, 13 Sept 2024, 16:29 LiNan, ***@***.***> wrote:
Thank you, if I update Archer Plus SR8 to v3, do I need to recalibrate it
(ie take it out from the model)
… <#m_3969118799539893322_>
On Fri, 13 Sept 2024, 16:18 LiNan, *@*.*> wrote: Sorry but this is not
the question I'm asking. As I need the new functionality as especially
because your 1.1.14 isrm is buggy (confirmed by you) mu question is If I
update to v 3 my SR receivers, will I have to take all these receivers out
to recalibrate. Could you please kindly answer that …
<#m_-4417743000043858591_> On Fri, 13 Sept 2024, 15:23 LiNan, @.> wrote:
The current SRn firmware can be used normally and does not require any
updates if you don't need the new function of the V3 — Reply to this email
directly, view it on GitHub <#47
<#47> (comment) <#47
(comment)
<#47 (comment)>>>,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/AGQTSNUST5XSZGGFX26ILT3ZWJZFZAVCNFSM6AAAAABOEPDIJCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNBYGA2TKNJZHA
<https://github.com/notifications/unsubscribe-auth/AGQTSNUST5XSZGGFX26ILT3ZWJZFZAVCNFSM6AAAAABOEPDIJCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNBYGA2TKNJZHA>
https://github.com/notifications/unsubscribe-auth/AGQTSNUST5XSZGGFX26ILT3ZWJZFZAVCNFSM6AAAAABOEPDIJCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNBYGA2TKNJZHA
<https://github.com/notifications/unsubscribe-auth/AGQTSNUST5XSZGGFX26ILT3ZWJZFZAVCNFSM6AAAAABOEPDIJCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNBYGA2TKNJZHA>
. You are receiving this because you authored the thread.Message ID: @.> if
you used ACCESS SRx Version 1.0.11, you can only upgrade your Tx to V3,
they are compatible. otherwise，You need to update both the RX and TX to
V3.0 — Reply to this email directly, view it on GitHub <#47 (comment)
<#47 (comment)>>,
or unsubscribe
https://github.com/notifications/unsubscribe-auth/AGQTSNV3YICEUBM7P2Y4I6DZWJ7VFAVCNFSM6AAAAABOEPDIJCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNBYGEZDCNRVHE
<https://github.com/notifications/unsubscribe-auth/AGQTSNV3YICEUBM7P2Y4I6DZWJ7VFAVCNFSM6AAAAABOEPDIJCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNBYGEZDCNRVHE>
. You are receiving this because you authored the thread.Message ID: @.*
**>
After upgrading the receiver, you need to rebind and turn on the Gyro
again, check the parameter, In theory, there is no need for recalibration,
but I cannot guarantee 100%
—
Reply to this email directly, view it on GitHub
<#47 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AGQTSNVERZ77QVPNVQAIDJLZWKA57AVCNFSM6AAAAABOEPDIJCVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDGNBYGEZTINRVG4>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
|
Is this firmware FW-RF-Modul-ISRM-Twin-Beta.v3.0.0 just a test version? Is it possible to fly with this version 3 without risk? |
it's compatible with TX Kavan V20 |
|
And Is it possible to fly with this version 3 without risk? Or waiting the official version... |
An important question is that for gyro enabled receivers does new firmware means taking them out if the plane and recalibrating?
Because I've just done that (take receiver out of the model, reset, calibrate, install back) for the latest version of ArcherPlus SRn firmware for all my affected receivers to be compatible with the last round of rx firmware updates and v3 lua, I hope this firmware version does not force me to do it all over again.
Also what about older versions of ACCESS receivers, eg Archer Pro. Are they going to be compatible with v3 ISRM?
Thanks
The text was updated successfully, but these errors were encountered: