Skip to content

IR: fix scalar FMA tied sources #3874

IR: fix scalar FMA tied sources

IR: fix scalar FMA tied sources #3874

Workflow file for this run

name: Instruction Count CI run
on:
push:
branches:
- main
pull_request:
branches:
- main
env:
# Customize the CMake build type here (Release, Debug, RelWithDebInfo, etc.)
BUILD_TYPE: Release
CC: clang
CXX: clang++
jobs:
instcountci_tests:
runs-on: ${{ matrix.arch }}
strategy:
matrix:
arch: [[self-hosted, x64], [self-hosted, ARM64]]
fail-fast: false
steps:
- uses: actions/checkout@v3
- name: Set runner label
run: echo "runner_label=${{ matrix.arch[1] }}" >> $GITHUB_ENV
- name: Set rootfs paths
run: |
echo "FEX_ROOTFS_MOUNT=/mnt/AutoNFS/rootfs/" >> $GITHUB_ENV
echo "FEX_ROOTFS_PATH=$HOME/Rootfs/" >> $GITHUB_ENV
echo "FEX_ROOTFS=$HOME/Rootfs/" >> $GITHUB_ENV
echo "ROOTFS=$HOME/Rootfs/" >> $GITHUB_ENV
- name: Update RootFS cache
# Use a bash shell so we can use the same syntax for environment variable
# access regardless of the host operating system
shell: bash
run: $GITHUB_WORKSPACE/Scripts/CI_FetchRootFS.py
- name : submodule checkout
# Need to update submodules
run: |
git submodule sync --recursive
git submodule update --init --depth 1
- name: Clean Build Environment
run: rm -Rf ${{runner.workspace}}/build
- name: Create Build Environment
# Some projects don't allow in-source building, so create a separate build directory
# We'll use this as our working directory for all subsequent commands
run: cmake -E make_directory ${{runner.workspace}}/build
- name: Set vixl_sim x86
if: matrix.arch[1] == 'x64'
run: |
echo "VIXL_SIM_ENABLED=True" >> $GITHUB_ENV
- name: Set vixl_sim Arm64
if: matrix.arch[1] == 'ARM64'
run: |
echo "VIXL_SIM_ENABLED=False" >> $GITHUB_ENV
- name: Configure CMake
# Use a bash shell so we can use the same syntax for environment variable
# access regardless of the host operating system
shell: bash
working-directory: ${{runner.workspace}}/build
# Note the current convention is to use the -S and -B options here to specify source
# and build directories, but this is only available with CMake 3.13 and higher.
# The CMake binaries on the Github Actions machines are (as of this writing) 3.12
run: cmake $GITHUB_WORKSPACE -DCMAKE_BUILD_TYPE=$BUILD_TYPE -G Ninja -DENABLE_VIXL_SIMULATOR=$VIXL_SIM_ENABLED -DENABLE_VIXL_DISASSEMBLER=True -DENABLE_LTO=False -DENABLE_ASSERTIONS=True -DENABLE_X86_HOST_DEBUG=True
- name: Build
working-directory: ${{runner.workspace}}/build
shell: bash
env:
FEX_DISABLETELEMETRY: 1
# Execute the build. You can specify a specific target with "--target <NAME>"
run: cmake --build . --config $BUILD_TYPE --target CodeSizeValidation instcountci_test_files
- name: Instruction Count Tests
working-directory: ${{runner.workspace}}/build
shell: bash
# Execute the unit tests
run: cmake --build . --config $BUILD_TYPE --target instcountci_tests
- name: Instruction Count Test Results move
if: ${{ always() }}
shell: bash
working-directory: ${{runner.workspace}}/build
run: mv ${{runner.workspace}}/build/Testing/Temporary/LastTest.log ${{runner.workspace}}/build/Testing/Temporary/LastTest_InstCountCI.log || true
- name: Update local repo instcount
if: ${{ always() }}
shell: bash
working-directory: ${{runner.workspace}}/build
run: cmake --build . --config $BUILD_TYPE --target instcountci_update_tests
- name: Get instcountCI diff
if: ${{ always() }}
shell: bash
working-directory: ${{github.workspace}}/
run: git diff --output=${{runner.workspace}}/build/InstCountCI.diff
- name: Check if InstCountCI Diff exists
if: ${{ always() }}
shell: bash
working-directory: ${{github.workspace}}/
# Check if the file is empty
run: sh -c "! test -s ${{runner.workspace}}/build/InstCountCI.diff"
- name: Truncate test results
if: ${{ always() }}
shell: bash
working-directory: ${{runner.workspace}}/build
# Cap out the log files at 20M in case something crash spins and dumps fault text
# ASM tests get quite close to 10MB
run: truncate --size="<20M" ${{runner.workspace}}/build/Testing/Temporary/LastTest_*.log || true
- name: Set runner name
if: ${{ always() }}
run: echo "runner_name=$(hostname)" >> $GITHUB_ENV
- name: Upload results
if: ${{ always() }}
uses: 'actions/upload-artifact@v3'
timeout-minutes: 1
with:
name: Results-${{ env.runner_name }}
path: ${{runner.workspace}}/build/Testing/Temporary/LastTest_*.log
retention-days: 3
- name: Upload results InstCountCI
if: ${{ always() }}
uses: 'actions/upload-artifact@v3'
timeout-minutes: 1
with:
name: Results-${{ env.runner_name }}-instcountci
path: ${{runner.workspace}}/build/InstCountCI.diff
retention-days: 3