Update from base #15
Merged
Update from base #15
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Include asm/sections.h header which contains the correct types for _etext, _edata and _end - char arrays. Signed-off-by: Sergey Senozhatsky <[email protected]> Signed-off-by: Jesper Nilsson <[email protected]>
When exposing data access through debugfs, the correct debugfs_create_*() functions must be used, depending on data type. Remove all casts from data pointers passed to debugfs_create_*() functions, as such casts prevent the compiler from flagging bugs. omap_iommu.nr_tlb_entries is "int", hence casting to "u8 *" exposes only a part of it. Fix this by using debugfs_create_u32() instead. Signed-off-by: Geert Uytterhoeven <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
Removing the early device registration hook overlooked the fact that it only ran conditionally on a compatible device being present in the DT. With exynos_iommu_init() now running as an unconditional initcall, problems arise on non-Exynos systems when other IOMMU drivers find themselves unable to install their ops on the platform bus, or at worst the Exynos ops get called with someone else's domain and all hell breaks loose. The global ops/cache setup could probably all now be triggered from the first IOMMU probe, as with dma_dev assigment, but for the time being the simplest fix is to resurrect the logic from commit a7b67cd ("iommu/exynos: Play nice in multi-platform builds") to explicitly check the DT for the presence of an Exynos IOMMU before trying anything. Fixes: 928055a ("iommu/exynos: Remove custom platform device registration code") Signed-off-by: Robin Murphy <[email protected]> Acked-by: Marek Szyprowski <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
after commit a1ddcbe ("iommu/vt-d: Pass dmar_domain directly into iommu_flush_iotlb_psi", 2015-08-12), we have domain pointer as parameter to iommu_flush_iotlb_psi(), so no need to fetch it from cache again. More importantly, a NULL reference pointer bug is reported on RHEL7 (and it can be reproduced on some old upstream kernels too, e.g., v4.13) by unplugging an 40g nic from a VM (hard to test unplug on real host, but it should be the same): https://bugzilla.redhat.com/show_bug.cgi?id=1531367 [ 24.391863] pciehp 0000:00:03.0:pcie004: Slot(0): Attention button pressed [ 24.393442] pciehp 0000:00:03.0:pcie004: Slot(0): Powering off due to button press [ 29.721068] i40evf 0000:01:00.0: Unable to send opcode 2 to PF, err I40E_ERR_QUEUE_EMPTY, aq_err OK [ 29.783557] iommu: Removing device 0000:01:00.0 from group 3 [ 29.784662] BUG: unable to handle kernel NULL pointer dereference at 0000000000000304 [ 29.785817] IP: iommu_flush_iotlb_psi+0xcf/0x120 [ 29.786486] PGD 0 [ 29.786487] P4D 0 [ 29.786812] [ 29.787390] Oops: 0000 [#1] SMP [ 29.787876] Modules linked in: ip6t_rpfilter ip6t_REJECT nf_reject_ipv6 xt_conntrack ip_set nfnetlink ebtable_nat ebtable_broute bridge stp llc ip6table_ng [ 29.795371] CPU: 0 PID: 156 Comm: kworker/0:2 Not tainted 4.13.0 #14 [ 29.796366] Hardware name: QEMU Standard PC (Q35 + ICH9, 2009), BIOS 1.11.0-1.el7 04/01/2014 [ 29.797593] Workqueue: pciehp-0 pciehp_power_thread [ 29.798328] task: ffff94f5745b4a00 task.stack: ffffb326805ac000 [ 29.799178] RIP: 0010:iommu_flush_iotlb_psi+0xcf/0x120 [ 29.799919] RSP: 0018:ffffb326805afbd0 EFLAGS: 00010086 [ 29.800666] RAX: ffff94f5bc56e800 RBX: 0000000000000000 RCX: 0000000200000025 [ 29.801667] RDX: ffff94f5bc56e000 RSI: 0000000000000082 RDI: 0000000000000000 [ 29.802755] RBP: ffffb326805afbf8 R08: 0000000000000000 R09: ffff94f5bc86bbf0 [ 29.803772] R10: ffffb326805afba8 R11: 00000000000ffdc4 R12: ffff94f5bc86a400 [ 29.804789] R13: 0000000000000000 R14: 00000000ffdc4000 R15: 0000000000000000 [ 29.805792] FS: 0000000000000000(0000) GS:ffff94f5bfc00000(0000) knlGS:0000000000000000 [ 29.806923] CS: 0010 DS: 0000 ES: 0000 CR0: 0000000080050033 [ 29.807736] CR2: 0000000000000304 CR3: 000000003499d000 CR4: 00000000000006f0 [ 29.808747] Call Trace: [ 29.809156] flush_unmaps_timeout+0x126/0x1c0 [ 29.809800] domain_exit+0xd6/0x100 [ 29.810322] device_notifier+0x6b/0x70 [ 29.810902] notifier_call_chain+0x4a/0x70 [ 29.812822] __blocking_notifier_call_chain+0x47/0x60 [ 29.814499] blocking_notifier_call_chain+0x16/0x20 [ 29.816137] device_del+0x233/0x320 [ 29.817588] pci_remove_bus_device+0x6f/0x110 [ 29.819133] pci_stop_and_remove_bus_device+0x1a/0x20 [ 29.820817] pciehp_unconfigure_device+0x7a/0x1d0 [ 29.822434] pciehp_disable_slot+0x52/0xe0 [ 29.823931] pciehp_power_thread+0x8a/0xa0 [ 29.825411] process_one_work+0x18c/0x3a0 [ 29.826875] worker_thread+0x4e/0x3b0 [ 29.828263] kthread+0x109/0x140 [ 29.829564] ? process_one_work+0x3a0/0x3a0 [ 29.831081] ? kthread_park+0x60/0x60 [ 29.832464] ret_from_fork+0x25/0x30 [ 29.833794] Code: 85 ed 74 0b 5b 41 5c 41 5d 41 5e 41 5f 5d c3 49 8b 54 24 60 44 89 f8 0f b6 c4 48 8b 04 c2 48 85 c0 74 49 45 0f b6 ff 4a 8b 3c f8 <80> bf [ 29.838514] RIP: iommu_flush_iotlb_psi+0xcf/0x120 RSP: ffffb326805afbd0 [ 29.840362] CR2: 0000000000000304 [ 29.841716] ---[ end trace b10ec0d6900868d3 ]--- This patch fixes that problem if applied to v4.13 kernel. The bug does not exist on latest upstream kernel since it's fixed as a side effect of commit 13cf017 ("iommu/vt-d: Make use of iova deferred flushing", 2017-08-15). But IMHO it's still good to have this patch upstream. CC: Alex Williamson <[email protected]> Signed-off-by: Peter Xu <[email protected]> Fixes: a1ddcbe ("iommu/vt-d: Pass dmar_domain directly into iommu_flush_iotlb_psi") Reviewed-by: Alex Williamson <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
Update the IOMMU default domain address width to 57 bits. This would enable the IOMMU to do upto 5-levels of paging for second level translations - IOVA translation requests without PASID. Even though the maximum supported address width is being increased to 57, __iommu_calculate_agaw() would set the actual supported address width to the maximum support available in IOMMU hardware. Signed-off-by: Sohil Mehta <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
Add a check to verify IOMMU 1GB page support. If the CPU supports 1GB pages but the IOMMU does not support it then disable SVM by not allocating PASID tables. Signed-off-by: Sohil Mehta <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
Add a check to verify IOMMU 5-level paging support. If the CPU supports supports 5-level paging but the IOMMU does not support it then disable SVM by not allocating PASID tables. Signed-off-by: Sohil Mehta <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
If the CPU has support for 5-level paging enabled and the IOMMU also supports 5-level paging then enable the 5-level paging mode for first- level translations - used when SVM is enabled. Signed-off-by: Sohil Mehta <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
Since the MSM IOMMU driver now probes via DT exclusively rather than platform data, dependent masters should be deferred until the IOMMU itself is ready. Thus we can do away with the early initialisation hook to unconditionally claim the bus ops, and instead do that only once an IOMMU is actually probed. Furthermore, this should also make the driver safe for multiplatform kernels on non-MSM SoCs. Reviewed-by: Sricharan R <[email protected]> Signed-off-by: Robin Murphy <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
Having of_iommu_init() call ipmmu_init() via ipmmu_vmsa_iommu_of_setup() does nothing that the subsys_initcall wouldn't do slightly later anyway, since probe-deferral of masters means it is no longer critical to register the driver super-early. Clean it up. Signed-off-by: Robin Murphy <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
Now that no more drivers rely on arbitrary early initialisation via an of_iommu_init_fn hook, let's clean up the redundant remnants. The IOMMU_OF_DECLARE() macro needs to remain for now, as the probe-deferral mechanism has no other nice way to detect built-in drivers before they have registered themselves, such that it can make the right decision. Reviewed-by: Sricharan R <[email protected]> Signed-off-by: Robin Murphy <[email protected]> Signed-off-by: Joerg Roedel <[email protected]>
…86/vt-d' and 'core' into next
This change improves Receive efficiency by posting Receives only on the same CPU that handles Receive completion. Improved latency and throughput has been noted with this change. Signed-off-by: Chuck Lever <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
In recent years, the linux-pcmcia mailing list gained a pretty bad signal-to-noise ratio. It does not seem worth the hassle to keep it any longer. Thanks to David for hosting the list for the last couple of years! Acked-by: David Woodhouse <[email protected]> CC: Russell King <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
Even though it is just in a dev_dbg statement, improve the printk format to use %pr instead of plain %p. Signed-off-by: Dominik Brodowski <[email protected]>
clk_prepare_enable() can fail here and we must check its return value. Signed-off-by: Arvind Yadav <[email protected]> CC: Russell King <[email protected]> Signed-off-by: Dominik Brodowski <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: Ilya Dryomov <[email protected]>
If rbd_img_request_submit() fails, parent_request->obj_request is
NULLed out, triggering an assert in rbd_obj_request_put():
rbd_img_request_put(parent_request)
rbd_parent_request_destroy
rbd_obj_request_put(NULL)
Just remove it -- parent_request->obj_request will be put in
rbd_parent_request_destroy().
Signed-off-by: Ilya Dryomov <[email protected]>
This feature bit restricts older clients from performing certain maintenance operations against an image (e.g. clone, snap create). krbd does not perform maintenance operations. Cc: [email protected] Signed-off-by: Ilya Dryomov <[email protected]> Reviewed-by: Jason Dillaman <[email protected]>
MDS need to rdlock directory inode's authlock when handling these requests. Voluntarily dropping CEPH_CAP_AUTH_EXCL avoids a cap revoke message. Signed-off-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
MDS need to xlock inode's linklock when handling link/rename requests. Voluntarily dropping CEPH_CAP_AUTH_EXCL avoids a cap revoke message. Signed-off-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
For CEPH_SETATTR_ATIME, MDS needs to xlock filelock, Fsxrw caps are not allowed for xlocked filelock. For CEPH_SETATTR_SIZE request that truncates file to smaller size, MDS needs to xlock filelock, Fsxrw caps are not allowed for xlocked filelock. Signed-off-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
MDS need to rdlock directory inode's filelock when handling readdir request. Voluntarily dropping CEPH_CAP_AUTH_EXCL avoids a cap revoke message. Signed-off-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
ceph_fill_trace() already calls ceph_invalidate_dir_request() for traceless reply. No need to duplicate the code in ceph_rename(). Signed-off-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
It allows accessing i_shared_gen without holding i_ceph_lock. It is preparation for later patch. Signed-off-by: "Yan, Zheng" <[email protected]> Acked-by: Jeff Layton <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
Readdir cache keeps array of dentry pointers in page cache. If any dentry in readdir cache gets pruned, ceph_d_prune() disables readdir cache for later readdir syscall. The problem is that ceph_d_prune() ignores unhashed dentry. Ideally MDS should have already revoked CEPH_CAP_FILE_SHARED (which also disables readdir cache) when dentry gets unhashed. But if it is somehow MDS does not properly revoke CEPH_CAP_FILE_SHARED and the unhashed dentry gets pruned later, ceph_d_prune() will not disable readdir cache, later readdir may reference invalid dentry pointer. The fix is make ceph_d_prune() do extra check for unhashed dentry. Disable readdir cache if the unhashed dentry is still referenced by readdir cache. Another fix in this patch is handle d_splice_alias(). If a dentry gets spliced into new parent dentry, treat it as if it was pruned (call ceph_d_prune() for it). Signed-off-by: "Yan, Zheng" <[email protected]> Acked-by: Jeff Layton <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
Previously ceph_read_iter() uses current->journal to pass context info to ceph_readpages(), so that ceph_readpages() can distinguish read(2) from readahead(2)/fadvise(2)/madvise(2). The problem is that page fault can happen when copying data to userspace memory. Page fault may call other filesystem's page_mkwrite() if the userspace memory is mapped to a file. The later filesystem may also want to use current->journal. The fix is define a on-stack data structure in ceph_read_iter(), add it to context list in ceph_file_info. ceph_readpages() searches the list, find if there is a context belongs to current thread. Signed-off-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
Signed-off-by: "Yan, Zheng" <[email protected]> Signed-off-by: Ilya Dryomov <[email protected]>
Fix to return a negative error code from the clk_get() error handling case instead of 0, as done elsewhere in this function. Fixes: 343a8d1 (cpufreq: scpi: remove arm_big_little dependency) Signed-off-by: Wei Yongjun <[email protected]> Acked-by: Viresh Kumar <[email protected]> Acked-by: Sudeep Holla <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
When maxcpus=1 is in the kernel command line, the BP is responsible for re-enabling the HWP - because currently only the APs invoke intel_pstate_hwp_enable() during their online process - which might put the system into unstable state after resume. Fix this by enabling the HWP explicitly on BP during resume. Reported-by: Doug Smythies <[email protected]> Suggested-by: Srinivas Pandruvada <[email protected]> Signed-off-by: Yu Chen <[email protected]> [ rjw: Subject/changelog, minor modifications ] Signed-off-by: Rafael J. Wysocki <[email protected]>
Pointer subtraction is slow and tedious. Therefore, replace all instances
where cpufreq_for_each_{valid_,}entry loops contained such substractions
with an iteration macro providing an index to the frequency_table entry.
Suggested-by: Al Viro <[email protected]>
Link: http://lkml.kernel.org/r/[email protected]
Acked-by: Viresh Kumar <[email protected]>
Signed-off-by: Dominik Brodowski <[email protected]>
Signed-off-by: Rafael J. Wysocki <[email protected]>
Without this, the imx6q-cpufreq driver isn't loaded automatically when built as a module Tested on wandboard quad with a fedora 27 kernel rpm Signed-off-by: Nicolas Chauvet <[email protected]> Acked-by: Viresh Kumar <[email protected]> Signed-off-by: Rafael J. Wysocki <[email protected]>
* pm-cpufreq:
arm: imx: Add MODULE_ALIAS for cpufreq
cpufreq: Add and use cpufreq_for_each_{valid_,}entry_idx()
cpufreq: intel_pstate: Enable HWP during system resume on CPU0
cpufreq: scpi: fix error return code in scpi_cpufreq_init()
cpufreq: scpi: fix static checker warning cdev isn't an ERR_PTR
cpufreq: remove at32ap-cpufreq
cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ
cpufreq: Skip cpufreq resume if it's not suspended
* pm-cpuidle:
x86: PM: Make APM idle driver initialize polling state
* pm-domains:
PM / domains: Fix up domain-idle-states OF parsing
Commit 0fbc0b6 ("cris: remove arch specific early DT functions") was a bit overzealous in removing the CRIS DT handling, and the complete contents of the Makefile was erased instead of just the line for the devicetree file. This lead to a complete link failure for all SoCs in the CRIS port due to missing symbols. Restore the contents except the line for the devicetree file. Signed-off-by: Jesper Nilsson <[email protected]> Fixes: 0fbc0b6
* acpica: ACPICA: Update version to 20180105 ACPICA: All acpica: Update copyrights to 2018 ACPICA: Add a missing pair of parentheses ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR() ACPICA: Avoid NULL pointer arithmetic ACPICA: Linux: add support for X32 ABI compilation
* acpi-tables: ACPI: SPCR: Make SPCR available to x86 ACPI / tables: Add IORT to injectable table list * acpi-bus: ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530 ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs ACPI / bus: Do not call _STA on battery devices with unmet dependencies PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status ACPI: export acpi_bus_get_status_handle() * acpi-processor: ACPI / processor: Set default C1 idle state description ACPI: processor_perflib: Do not send _PPC change notification if not ready
* acpi-video: ACPI / video: Use true for boolean value * acpi-battery: ACPI / battery: Add quirk for Asus UX360UA and UX410UAK * acpi-cppc: ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit
…rnel.org/pub/scm/linux/kernel/git/jesper/cris Pull CRIS updates and fixes from Jesper Nilsson: - a small fix for some conflicting symbols, aligning CRIS with other platforms. - fix build breakage regression for all CRIS SoCs. The main Makefile for the CRIS port was overzealously scrubbed in 4.15-rc3. * tag 'cris-for-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: cris: Fix conflicting types for _etext, _edata, _end * tag 'cris-for-4.16-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/jesper/cris: CRIS: Restore mistakenly cleared kernel Makefile
A client that sends more than a hundred ops in a single compound currently gets an rpc-level GARBAGE_ARGS error. It would be more helpful to return NFS4ERR_RESOURCE, since that gives the client a better idea how to recover (for example by splitting up the compound into smaller compounds). This is all a bit academic since we've never actually seen a reason for clients to send such long compounds, but we may as well fix it. While we're there, just use NFSD4_MAX_OPS_PER_COMPOUND == 16, the constant we already use in the 4.1 case, instead of hard-coding 100. Chances anyone actually uses even 16 ops per compound are small enough that I think there's a neglible risk or any regression. This fixes pynfs test COMP6. Reported-by: "Lu, Xinyu" <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
The values of stat->mtime and inode->i_mtime may differ for overlayfs and stat->mtime is the correct value to use when encoding getattr. This is also consistent with the fact that other attr times are also encoded from stat values. Both callers of lease_get_mtime() already have the value of stat->mtime, so the only needed change is that lease_get_mtime() will not overwrite this value with inode->i_mtime in case the inode does not have an exclusive lease. Signed-off-by: Amir Goldstein <[email protected]> Reviewed-by: Jeff Layton <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
The time values in stat and inode may differ for overlayfs and stat time values are the correct ones to use. This is also consistent with the fact that fill_post_wcc() also stores stat time values. This means introducing a stat call that could fail, where previously we were just copying values out of the inode. To be conservative about changing behavior, we fall back to copying values out of the inode in the error case. It might be better just to clear fh_pre_saved (though note the BUG_ON in set_change_info). Signed-off-by: Amir Goldstein <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
There is now only one caller left for svcxdr_dupstr() and this is inside of an #ifdef, so we can get a warning when the option is disabled: fs/nfsd/nfs4xdr.c:241:1: error: 'svcxdr_dupstr' defined but not used [-Werror=unused-function] This changes the remaining caller to use a nicer IS_ENABLED() check, which lets the compiler drop the unused code silently. Fixes: e40d99e ("NFSD: Clean up symlink argument XDR decoders") Suggested-by: Rasmus Villemoes <[email protected]> Signed-off-by: Arnd Bergmann <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
A single NFSv4 WRITE compound can often have three operations: PUTFH, WRITE, then GETATTR. When the WRITE payload is sent in a Read chunk, the client places the GETATTR in the inline part of the RPC/RDMA message, just after the WRITE operation (sans payload). The position value in the Read chunk enables the receiver to insert the Read chunk at the correct place in the received XDR stream; that is between the WRITE and GETATTR. According to RFC 8166, an NFS/RDMA client does not have to add XDR round-up to the Read chunk that carries the WRITE payload. The receiver adds XDR round-up padding if it is absent and the receiver's XDR decoder requires it to be present. Commit 193bcb7 ("svcrdma: Populate tail iovec when receiving") attempted to add support for receiving such a compound so that just the WRITE payload appears in rq_arg's page list, and the trailing GETATTR is placed in rq_arg's tail iovec. (TCP just strings the whole compound into the head iovec and page list, without regard to the alignment of the WRITE payload). The server transport logic also had to accommodate the optional XDR round-up of the Read chunk, which it did simply by lengthening the tail iovec when round-up was needed. This approach is adequate for the NFSv2 and NFSv3 WRITE decoders. Unfortunately it is not sufficient for nfsd4_decode_write. When the Read chunk length is a couple of bytes less than PAGE_SIZE, the computation at the end of nfsd4_decode_write allows argp->pagelen to go negative, which breaks the logic in read_buf that looks for the tail iovec. The result is that a WRITE operation whose payload length is just less than a multiple of a page succeeds, but the subsequent GETATTR in the same compound fails with NFS4ERR_OP_ILLEGAL because the XDR decoder can't find it. Clients ignore the error, but they must update their attribute cache via a separate round trip. As nfsd4_decode_write appears to expect the payload itself to always have appropriate XDR round-up, have svc_rdma_build_normal_read_chunk add the Read chunk XDR round-up to the page_len rather than lengthening the tail iovec. Reported-by: Olga Kornievskaia <[email protected]> Fixes: 193bcb7 ("svcrdma: Populate tail iovec when receiving") Signed-off-by: Chuck Lever <[email protected]> Tested-by: Olga Kornievskaia <[email protected]> Signed-off-by: J. Bruce Fields <[email protected]>
…t/mst/vhost Pull virtio/vhost updates from Michael Tsirkin: "virtio, vhost: fixes, cleanups, features This includes the disk/cache memory stats for for the virtio balloon, as well as multiple fixes and cleanups" * tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost: vhost: don't hold onto file pointer for VHOST_SET_LOG_FD vhost: don't hold onto file pointer for VHOST_SET_VRING_ERR vhost: don't hold onto file pointer for VHOST_SET_VRING_CALL ringtest: ring.c malloc & memset to calloc virtio_vop: don't kfree device on register failure virtio_pci: don't kfree device on register failure virtio: split device_register into device_initialize and device_add vhost: remove unused lock check flag in vhost_dev_cleanup() vhost: Remove the unused variable. virtio_blk: print capacity at probe time virtio: make VIRTIO a menuconfig to ease disabling it all virtio/ringtest: virtio_ring: fix up need_event math virtio/ringtest: fix up need_event math virtio: virtio_mmio: make of_device_ids const. firmware: Use PTR_ERR_OR_ZERO() virtio-mmio: Use PTR_ERR_OR_ZERO() vhost/scsi: Improve a size determination in four functions virtio_balloon: include disk/file caches memory statistics
…el/git/arm64/linux
Pull more arm64 updates from Catalin Marinas:
"As I mentioned in the last pull request, there's a second batch of
security updates for arm64 with mitigations for Spectre/v1 and an
improved one for Spectre/v2 (via a newly defined firmware interface
API).
Spectre v1 mitigation:
- back-end version of array_index_mask_nospec()
- masking of the syscall number to restrict speculation through the
syscall table
- masking of __user pointers prior to deference in uaccess routines
Spectre v2 mitigation update:
- using the new firmware SMC calling convention specification update
- removing the current PSCI GET_VERSION firmware call mitigation as
vendors are deploying new SMCCC-capable firmware
- additional branch predictor hardening for synchronous exceptions
and interrupts while in user mode
Meltdown v3 mitigation update:
- Cavium Thunder X is unaffected but a hardware erratum gets in the
way. The kernel now starts with the page tables mapped as global
and switches to non-global if kpti needs to be enabled.
Other:
- Theoretical trylock bug fixed"
* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (38 commits)
arm64: Kill PSCI_GET_VERSION as a variant-2 workaround
arm64: Add ARM_SMCCC_ARCH_WORKAROUND_1 BP hardening support
arm/arm64: smccc: Implement SMCCC v1.1 inline primitive
arm/arm64: smccc: Make function identifiers an unsigned quantity
firmware/psci: Expose SMCCC version through psci_ops
firmware/psci: Expose PSCI conduit
arm64: KVM: Add SMCCC_ARCH_WORKAROUND_1 fast handling
arm64: KVM: Report SMCCC_ARCH_WORKAROUND_1 BP hardening support
arm/arm64: KVM: Turn kvm_psci_version into a static inline
arm/arm64: KVM: Advertise SMCCC v1.1
arm/arm64: KVM: Implement PSCI 1.0 support
arm/arm64: KVM: Add smccc accessors to PSCI code
arm/arm64: KVM: Add PSCI_VERSION helper
arm/arm64: KVM: Consolidate the PSCI include files
arm64: KVM: Increment PC after handling an SMC trap
arm: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls
arm64: KVM: Fix SMCCC handling of unimplemented SMC/HVC calls
arm64: entry: Apply BP hardening for suspicious interrupts from EL0
arm64: entry: Apply BP hardening for high-priority synchronous exceptions
arm64: futex: Mask __user pointers prior to dereference
...
Commit b9f5fb1 ("cramfs: fix MTD dependency") did what it says. Since commit 9059a34 ("kconfig: fix relational operators for bool and tristate symbols") it is possible to do it slightly better though. Signed-off-by: Nicolas Pitre <[email protected]> Signed-off-by: Linus Torvalds <[email protected]>
Pull ceph updates from Ilya Dryomov: "Things have been very quiet on the rbd side, as work continues on the big ticket items slated for the next merge window. On the CephFS side we have a large number of cap handling improvements, a fix for our long-standing abuse of ->journal_info in ceph_readpages() and yet another dentry pointer management patch" * tag 'ceph-for-4.16-rc1' of git://github.com/ceph/ceph-client: ceph: improving efficiency of syncfs libceph: check kstrndup() return value ceph: try to allocate enough memory for reserved caps ceph: fix race of queuing delayed caps ceph: delete unreachable code in ceph_check_caps() ceph: limit rate of cap import/export error messages ceph: fix incorrect snaprealm when adding caps ceph: fix un-balanced fsc->writeback_count update ceph: track read contexts in ceph_file_info ceph: avoid dereferencing invalid pointer during cached readdir ceph: use atomic_t for ceph_inode_info::i_shared_gen ceph: cleanup traceless reply handling for rename ceph: voluntarily drop Fx cap for readdir request ceph: properly drop caps for setattr request ceph: voluntarily drop Lx cap for link/rename requests ceph: voluntarily drop Ax cap for requests that create new inode rbd: whitelist RBD_FEATURE_OPERATIONS feature bit rbd: don't NULL out ->obj_request in rbd_img_obj_parent_read_full() rbd: use kmem_cache_zalloc() in rbd_img_request_create() rbd: obj_request->completion is unused
…/~airlied/linux
Pull more drm updates from Dave Airlie:
"Ben missed sending his nouveau tree, but he really didn't have much
stuff in it:
- GP108 acceleration support is enabled by "secure boot" support
- some clockgating work on Kepler, and bunch of fixes
- the bulk of the diff is regenerated firmware files, the change to
them really isn't that large.
Otherwise this contains regular Intel and AMDGPU fixes"
* tag 'drm-for-v4.16-part2-fixes' of git://people.freedesktop.org/~airlied/linux: (59 commits)
drm/i915/bios: add DP max link rate to VBT child device struct
drm/i915/cnp: Properly handle VBT ddc pin out of bounds.
drm/i915/cnp: Ignore VBT request for know invalid DDC pin.
drm/i915/cmdparser: Do not check past the cmd length.
drm/i915/cmdparser: Check reg_table_count before derefencing.
drm/i915/bxt, glk: Increase PCODE timeouts during CDCLK freq changing
drm/i915/gvt: Use KVM r/w to access guest opregion
drm/i915/gvt: Fix aperture read/write emulation when enable x-no-mmap=on
drm/i915/gvt: only reset execlist state of one engine during VM engine reset
drm/i915/gvt: refine intel_vgpu_submission_ops as per engine ops
drm/amdgpu: re-enable CGCG on CZ and disable on ST
drm/nouveau/clk: fix gcc-7 -Wint-in-bool-context warning
drm/nouveau/mmu: Fix trailing semicolon
drm/nouveau: Introduce NvPmEnableGating option
drm/nouveau: Add support for SLCG for Kepler2
drm/nouveau: Add support for BLCG on Kepler2
drm/nouveau: Add support for BLCG on Kepler1
drm/nouveau: Add support for basic clockgating on Kepler1
drm/nouveau/kms/nv50: fix handling of gamma since atomic conversion
drm/nouveau/kms/nv50: use INTERPOLATE_257_UNITY_RANGE LUT on newer chipsets
...
…t/brodo/pcmcia Pull pcmcia updates from Dominik Brodowski: "The linux-pcmcia mailing list was shut down, so offer an alternative path for patches in MAINTAINERS. Also, throw in two odd fixes for the pcmcia subsystem" * 'pcmcia' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia: pcmcia: soc_common: Handle return value of clk_prepare_enable pcmcia: use proper printk format for resource pcmcia: remove mailing list, update MAINTAINERS
…/kernel/git/joro/iommu Pull IOMMU updates from Joerg Roedel: "This time there are not a lot of changes coming from the IOMMU side. That is partly because I returned from my parental leave late in the development process and probably partly because everyone was busy with Spectre and Meltdown mitigation work and didn't find the time for IOMMU work. So here are the few changes that queued up for this merge window: - 5-level page-table support for the Intel IOMMU. - error reporting improvements for the AMD IOMMU driver - additional DT bindings for ipmmu-vmsa (Renesas) - small fixes and cleanups" * tag 'iommu-updates-v4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: iommu: Clean up of_iommu_init_fn iommu/ipmmu-vmsa: Remove redundant of_iommu_init_fn hook iommu/msm: Claim bus ops on probe iommu/vt-d: Enable 5-level paging mode in the PASID entry iommu/vt-d: Add a check for 5-level paging support iommu/vt-d: Add a check for 1GB page support iommu/vt-d: Enable upto 57 bits of domain address width iommu/vt-d: Use domain instead of cache fetching iommu/exynos: Don't unconditionally steal bus ops iommu/omap: Fix debugfs_create_*() usage iommu/vt-d: clean up pr_irq if request_threaded_irq fails iommu: Check the result of iommu_group_get() for NULL iommu/ipmmu-vmsa: Add r8a779(70|95) DT bindings iommu/ipmmu-vmsa: Add r8a7796 DT binding iommu/amd: Set the device table entry PPR bit for IOMMU V2 devices iommu/amd - Record more information about unknown events
…ernel/git/dhowells/linux-fs
Pull afs updates from David Howells:
"Four fixes:
- add a missing put
- two fixes to reset the address iteration cursor correctly
- fix setting up the fileserver iteration cursor.
Two cleanups:
- remove some dead code
- rearrange a function to be more logically laid out
And one new feature:
- Support AFS dynamic root.
With this one should be able to do, say:
mkdir /afs
mount -t afs none /afs -o dyn
to create a dynamic root and then, provided you have keyutils
installed, do:
ls /afs/grand.central.org
and:
ls /afs/umich.edu
to list the root volumes of both those organisations' AFS cells
without requiring any other setup (the kernel upcall to a program
in the keyutils package to do DNS access as does NFS)"
* tag 'afs-next-20180208' of git://git.kernel.org/pub/scm/linux/kernel/git/dhowells/linux-fs:
afs: Support the AFS dynamic root
afs: Rearrange afs_select_fileserver() a little
afs: Remove unused code
afs: Fix server list handling
afs: Need to clear responded flag in addr cursor
afs: Fix missing cursor clearance
afs: Add missing afs_put_cell()
…el/git/hubcap/linux
Pull orangefs updates from Mike Marshall:
"Mostly cleanups, but three bug fixes:
- don't pass garbage return codes back up the call chain (Mike
Marshall)
- fix stale inode test (Martin Brandenburg)
- fix off-by-one errors (Xiongfeng Wang)
Also add Martin as a reviewer in the Maintainers file"
* tag 'for-linus-4.16' of git://git.kernel.org/pub/scm/linux/kernel/git/hubcap/linux:
orangefs: reverse sense of is-inode-stale test in d_revalidate
orangefs: simplify orangefs_inode_is_stale
Orangefs: don't propogate whacky error codes
orangefs: use correct string length
orangefs: make orangefs_make_bad_inode static
orangefs: remove ORANGEFS_KERNEL_DEBUG
orangefs: remove gossip_ldebug and gossip_lerr
orangefs: make orangefs_client_debug_init static
MAINTAINERS: update orangefs list and add myself as reviewer
…ux/kernel/git/kees/linux Pull gcc plugins updates from Kees Cook: - update includes for gcc 8 (Valdis Kletnieks) - update initializers for gcc 8 * tag 'gcc-plugins-v4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/kees/linux: gcc-plugins: Use dynamic initializers gcc-plugins: Add include required by GCC release 8
…linux-dax Pull idr updates from Matthew Wilcox: - test-suite improvements - replace the extended API by improving the normal API - performance improvement for IDRs which are 1-based rather than 0-based - add documentation * 'idr-2018-02-06' of git://git.infradead.org/users/willy/linux-dax: idr: Add documentation idr: Make 1-based IDRs more efficient idr: Warn if old iterators see large IDs idr: Rename idr_for_each_entry_ext idr: Remove idr_alloc_ext cls_u32: Convert to idr_alloc_u32 cls_u32: Reinstate cyclic allocation cls_flower: Convert to idr_alloc_u32 cls_bpf: Convert to use idr_alloc_u32 cls_basic: Convert to use idr_alloc_u32 cls_api: Convert to idr_alloc_u32 net sched actions: Convert to use idr_alloc_u32 idr: Add idr_alloc_u32 helper idr: Delete idr_find_ext function idr: Delete idr_replace_ext function idr: Delete idr_remove_ext function IDR test suite: Check handling negative end correctly idr test suite: Fix ida_test_random() radix tree test suite: Remove ARRAY_SIZE
Pull nfsd update from Bruce Fields: "A fairly small update this time around. Some cleanup, RDMA fixes, overlayfs fixes, and a fix for an NFSv4 state bug. The bigger deal for nfsd this time around was Jeff Layton's already-merged i_version patches" * tag 'nfsd-4.16' of git://linux-nfs.org/~bfields/linux: svcrdma: Fix Read chunk round-up NFSD: hide unused svcxdr_dupstr() nfsd: store stat times in fill_pre_wcc() instead of inode times nfsd: encode stat->mtime for getattr instead of inode->i_mtime nfsd: return RESOURCE not GARBAGE_ARGS on too many ops nfsd4: don't set lock stateid's sc_type to CLOSED nfsd: Detect unhashed stids in nfsd4_verify_open_stid() sunrpc: remove dead code in svc_sock_setbufsize svcrdma: Post Receives in the Receive completion handler nfsd4: permit layoutget of executable-only files lockd: convert nlm_rqst.a_count from atomic_t to refcount_t lockd: convert nlm_lockowner.count from atomic_t to refcount_t lockd: convert nsm_handle.sm_count from atomic_t to refcount_t
…ernel/git/rafael/linux-pm
Pull more power management updates from Rafael Wysocki:
"These are mostly fixes and cleanups and removal of the no longer
needed at32ap-cpufreq driver.
Specifics:
- Drop the at32ap-cpufreq driver which is useless after the removal
of the corresponding arch (Corentin LABBE).
- Fix a regression from the 4.14 cycle in the APM idle driver by
making it initialize the polling state properly (Rafael Wysocki).
- Fix a crash on failing system suspend due to a missing check in the
cpufreq core (Bo Yan).
- Make the intel_pstate driver initialize the hardware-managed
P-state control (HWP) feature on CPU0 upon resume from system
suspend if HWP had been enabled before the system was suspended
(Chen Yu).
- Fix up the SCPI cpufreq driver after recent changes (Sudeep Holla,
Wei Yongjun).
- Avoid pointer subtractions during frequency table walks in cpufreq
(Dominik Brodowski).
- Avoid the check for ProcFeedback in ST/CZ in the cpufreq driver for
AMD processors and add a MODULE_ALIAS for cpufreq on ARM IMX (Akshu
Agrawal, Nicolas Chauvet).
- Fix the prototype of swsusp_arch_resume() on x86 (Arnd Bergmann).
- Fix up the parsing of power domains DT data (Ulf Hansson)"
* tag 'pm-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
arm: imx: Add MODULE_ALIAS for cpufreq
cpufreq: Add and use cpufreq_for_each_{valid_,}entry_idx()
cpufreq: intel_pstate: Enable HWP during system resume on CPU0
cpufreq: scpi: fix error return code in scpi_cpufreq_init()
x86: hibernate: fix swsusp_arch_resume() prototype
PM / domains: Fix up domain-idle-states OF parsing
cpufreq: scpi: fix static checker warning cdev isn't an ERR_PTR
cpufreq: remove at32ap-cpufreq
cpufreq: AMD: Ignore the check for ProcFeedback in ST/CZ
x86: PM: Make APM idle driver initialize polling state
cpufreq: Skip cpufreq resume if it's not suspended
…/kernel/git/rafael/linux-pm
Pull more ACPI updates from Rafael Wysocki:
"These are mostly fixes and cleanups, a few new quirks, a couple of
updates related to the handling of ACPI tables and ACPICA copyrights
refreshment.
Specifics:
- Update the ACPICA kernel code to upstream revision 20180105
including:
* Assorted fixes (Jung-uk Kim)
* Support for X32 ABI compilation (Anuj Mittal)
* Update of ACPICA copyrights to 2018 (Bob Moore)
- Prepare for future modifications to avoid executing the _STA
control method too early (Hans de Goede)
- Make the processor performance control library code ignore _PPC
notifications if they cannot be handled and fix up the C1 idle
state definition when it is used as a fallback state (Chen Yu,
Yazen Ghannam)
- Make it possible to use the SPCR table on x86 and to replace the
original IORT table with a new one from initrd (Prarit Bhargava,
Shunyong Yang)
- Add battery-related quirks for Asus UX360UA and UX410UAK and add
quirks for table parsing on Dell XPS 9570 and Precision M5530 (Kai
Heng Feng)
- Address static checker warnings in the CPPC code (Gustavo Silva)
- Avoid printing a raw pointer to the kernel log in the smart battery
driver (Greg Kroah-Hartman)"
* tag 'acpi-part2-4.16-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
ACPI: sbshc: remove raw pointer from printk() message
ACPI: SPCR: Make SPCR available to x86
ACPI / CPPC: Use 64-bit arithmetic instead of 32-bit
ACPI / tables: Add IORT to injectable table list
ACPI / bus: Parse tables as term_list for Dell XPS 9570 and Precision M5530
ACPICA: Update version to 20180105
ACPICA: All acpica: Update copyrights to 2018
ACPI / processor: Set default C1 idle state description
ACPI / battery: Add quirk for Asus UX360UA and UX410UAK
ACPI: processor_perflib: Do not send _PPC change notification if not ready
ACPI / scan: Use acpi_bus_get_status() to initialize ACPI_TYPE_DEVICE devs
ACPI / bus: Do not call _STA on battery devices with unmet dependencies
PCI: acpiphp_ibm: prepare for acpi_get_object_info() no longer returning status
ACPI: export acpi_bus_get_status_handle()
ACPICA: Add a missing pair of parentheses
ACPICA: Prefer ACPI_TO_POINTER() over ACPI_ADD_PTR()
ACPICA: Avoid NULL pointer arithmetic
ACPICA: Linux: add support for X32 ABI compilation
ACPI / video: Use true for boolean value
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.