- WiFi configuration manager for the ESP32 and ESP8266 platforms in the Arduino framework
This is a very simple, and somewhat naive, WiFi configuration manager for ESP32 and ESP8266 programs written in the Arduino framework. It will allow you to configure your WiFi network name (SSID) and password via a captive portal: the ESP becomes an access point with a web based configuration page.
It was written for ease of use, not for extended functionality. For example, restarting the microcontroller is the only way to leave the configuration portal. A button to restart is provided in the web interface.
The library generates a random password to protect the portal with, but it's only secured if you choose to do so by checking a checkbox. Of course, the user can configure pick their own password.
The configuration is stored in files in the flash filesystem of the ESP. The
files are dumped in the root directory of the filesystem. Debug output
(including the password to the configuration portal) is written to Serial.
Only automatic IP address assignment (DHCP) is supported.
#include <SPIFFS.h>
#include <WiFiSettings.h>
void setup() {
Serial.begin(115200);
SPIFFS.begin(true); // On first run, will format after failing to mount
WiFiSettings.connect();
}
void loop() {
...
}void setup() {
Serial.begin(115200);
SPIFFS.begin(true); // On first run, will format after failing to mount
// Note that these examples call functions that you probably don't have.
WiFiSettings.onSuccess = []() { green(); };
WiFiSettings.onFailure = []() { red(); };
WiFiSettings.onWaitLoop = []() { blue(); return 30; }; // delay 30 ms
WiFiSettings.onPortalWaitLoop = []() { blink(); };
String host = WiFiSettings.string( "server_host", "default.example.org");
int port = WiFiSettings.integer("server_port", 0, 65535, 443);
WiFiSettings.connect(true, 30);
}- The ArduinoOTA example shows how to enable over-the-air uploads in the WiFiSettings configuration portal. If you use the password from WiFiSettings as your OTA password, you no longer have to hard code it!
The examples are written for ESP32. To use them with the older ESP8266 chip, note that in the ESP8266 world, SPIFFS is deprecated and replaced by LittleFS.
WifiSettings uses SPIFFS on ESP32, and LittleFS on ESP8266.
Simply change both occurrences of SPIFFS to LittleFS, and remove true in
the call to LittleFS.begin();. LittleFS will format the filesystem by
default.
Automated installation:
Getting the source for manual installation:
git clone https://github.com/Juerd/ESP-WiFiSettings- .zip and .tar.gz files
This library uses a singleton instance (object), WiFiSettings, and is not
designed to be inherited from (subclassed), or to have multiple instances.
bool connect(bool portal = true, int wait_seconds = 30);If no WiFi network is configured yet, starts the configuration portal.
In other cases, it will attempt to connect to the network in station (WiFi
client) mode, and wait until either a connection is established, or
wait_seconds has elapsed. Returns true if connection succeeded.
By default, a failed connection (no connection established within the timeout)
will cause the configuration portal to be started. Given portal = false, it
will instead return false.
To wait forever until WiFi is connected, use wait_seconds = -1. In this case,
the value of portal is ignored.
Calls the following callbacks:
- WiFiSettings.onConnect
- WiFiSettings.onWaitLoop -> int (milliseconds to wait)
- WiFiSettings.onSuccess
- WiFiSettings.onFailure
void portal();Disconnects any active WiFi and turns the ESP into a captive portal with a DNS server that works on every hostname.
Normally, this function is called by .connect(). To allow reconfiguration
after the initial configuration, you could call .portal() manually, for
example when a button is pressed during startup.
This function never ends. A restart is required to resume normal operation.
Calls the following callbacks:
- WiFiSettings.onPortal
- WiFiSettings.onPortalWaitLoop
- WiFiSettings.onConfigSaved
- WiFiSettings.onRestart
int integer(String name, [long min, long max,] int init = 0, String label = name);
String string(String name, [[unsigned int min_length,] unsigned int max_length,] String init = "", String label = name);
bool checkbox(String name, bool init = false, String label = name);Configures a custom configurable option and returns the current value. When no
value (or an empty string) is configured, the value given as init is returned.
These functions should be called before calling .connect() or .portal().
The name is used as the filename in the SPIFFS, and as an HTML form element
name, and must be valid in both of those contexts. Any given name should only
be used once!
It is strongly suggested to include the name of a project in the name of the
configuration option, if it is specific to that project. For example, an MQTT
topic is probably specific to the application, while the server hostname
is likely to be shared among several projects. This helps when the ESP is
later reused for different applications.
Optionally, label can be specified as a descriptive text to use on the
configuration portal.
Some restrictions for the values can be given. Note that these limitations are
implemented on the client side, and may not be respected by browsers. For
integers, a range can be specified by supplying both min and max. For
strings, a maximum length can be specified as max_length. A minimum string
length can be set with min_length, effectively making the field mandatory:
it can no longer be left empty to get the init value.
Note: because of the way this library is designed, any assignment to the member variables should be done before calling any of the functions.
StringName to use as the hostname and SSID for the access point.
By default, this is set to "esp32-123456" or "esp8266-123456" where 123456 is the hexadecimal representation of the device interface specific part of the ESP's MAC address, in reverse byte order.
StringThis variable is used to protect the configuration portal's softAP. When no
password is explicitly assigned before the first custom configuration parameter
is defined (with .string, .integer, or .checkbox), a password will be
automatically generated and can be configured by the user.
It's strongly recommended to leave this variable untouched, and use the built-in password generation feature, and letting the user configure their own password, instead of "hard coding" a password.
The password has no effect unless the portal is secured; see .secure.
boolBy setting this to true, before any custom configuration parameter is defined
with .string, .integer, or .checkbox, secure mode will be forced, instead
of the default behavior, which is to initially use an insecure softAP and to
let the user decide whether to secure it.
When .secure is left in the default state, false, the user setting will be
used.
When forcing secure mode, it is still recommended to leave .password unset so
that a password is automatically generated, if you have a way to communicate it
to the user, for example with an LCD display, or
Serial.println(WiFiSettings.password);. Having hard coded password literals
in source code is generally considered a bad idea, because that makes it harder
to share the code with others.
The callback functions are mentioned in the documentation for the respective functions that call them.
Note that this library was briefly named WiFiConfig, but was renamed to WiFiSettings because there was already another library called WiFiConfig.
From version 3.0.0, based on a contribution by Reinier van der Leer, this library also supports the older ESP8266, and the repository was renamed from esp32-WiFiSettings to ESP-WiFiSettings.
It is said that all observable behaviors of your system will be depended on by somebody, and you are of course free to explore the source and use any unintended feature you may find to your advantage. Bear in mind, however, that depending on any behavior that is not documented here, is more likely to cause breakage when you install a newer version of this library. The author feels no obligation to keep backwards compatibility with undocumented features :)