Add EL18 specific build for v2.9

.github/workflows/actions.yml

@@ -91,7 +91,7 @@ jobs:
     strategy:
       matrix:
         target:
-          - nv14
+          - nv14;el18
           - t12
           - t16
           - t18

fw.json

@@ -1,7 +1,7 @@
 {
     "targets": [
         ["BETAFPV LiteRadio 3 Pro", "lr3pro-"],
-        ["Flysky EL18", "nv14-"],
+        ["Flysky EL18", "el18-"],
         ["Flysky NV14", "nv14-"],
         ["FrSky Horus X10", "x10-"],
         ["FrSky Horus X10 Access", "x10-access-"],

radio/src/targets/nv14/CMakeLists.txt

@@ -42,7 +42,11 @@ set(RF_BAUD_RATE 921600 230400 115200 57600 38400 19200 9600 4800 2400 1200)
 set(PCB_RF_BAUD 921600 CACHE STRING "INTERNAL_MODULE_BAUDRATE: ${RF_BAUD_RATE}")
 set_property(CACHE PCB_RF_BAUD PROPERTY STRINGS ${RF_BAUD_RATE})
 
-set(FLAVOUR nv14)
+if (PCBREV STREQUAL EL18)
+    set(FLAVOUR el18)
+else()
+    set(FLAVOUR nv14)
+endif()
 add_definitions(-DPCBNV14 -DPCBFLYSKY -DAFHDS2_BAUDRATE=${PCB_RF_BAUD})
 add_definitions(-DBATTERY_CHARGE)
 

radio/src/targets/nv14/board.h

@@ -215,8 +215,11 @@ enum EnumSwitches
 };
 
 #define STORAGE_NUM_SWITCHES  NUM_SWITCHES
+#if (PCBREV == EL18)
+#define DEFAULT_SWITCH_CONFIG (SWITCH_TOGGLE << 14) + (SWITCH_3POS << 12) + (SWITCH_3POS << 10) + (SWITCH_2POS << 8) + (SWITCH_2POS << 6) + (SWITCH_3POS << 4) + (SWITCH_3POS << 2) + (SWITCH_2POS << 0);
+#else
 #define DEFAULT_SWITCH_CONFIG (SWITCH_TOGGLE << 14) + (SWITCH_3POS << 12) + (SWITCH_3POS << 10) + (SWITCH_TOGGLE << 8) + (SWITCH_2POS << 6) + (SWITCH_TOGGLE << 4) + (SWITCH_3POS << 2) + (SWITCH_2POS << 0);
-
+#endif
 enum EnumSwitchesPositions
 {
   SW_SA0,
@@ -457,9 +460,16 @@ bool isBacklightEnabled();
 #if !defined(SIMU)
 void usbJoystickUpdate();
 #endif
-#define USB_NAME                        "FlySky NV14"
-#define USB_MANUFACTURER                'F', 'l', 'y', 'S', 'k', 'y', ' ', ' '  /* 8 bytes */
+
+#if (PCBREV == EL18)
+#define USB_NAME                        "Flysky EL18"
+#define USB_MANUFACTURER                'F', 'l', 'y', 's', 'k', 'y', ' ', ' '  /* 8 bytes */
+#define USB_PRODUCT                     'E', 'L', '1', '8', ' ', ' ', ' ', ' '  /* 8 Bytes */
+#else
+#define USB_NAME                        "Flysky NV14"
+#define USB_MANUFACTURER                'F', 'l', 'y', 's', 'k', 'y', ' ', ' '  /* 8 bytes */
 #define USB_PRODUCT                     'N', 'V', '1', '4', ' ', ' ', ' ', ' '  /* 8 Bytes */
+#endif
 
 #if defined(__cplusplus) && !defined(SIMU)
 }

tools/build-flysky.py

@@ -13,6 +13,11 @@
         "PCB": "NV14",
         "DEFAULT_MODE": "1",
     },
+    "EL18": {
+        "PCB": "NV14",
+        "PCBREV": "EL18",
+        "DEFAULT_MODE": "1",
+    },
 }
 
 translations = [

tools/build-gh.sh

@@ -176,6 +176,9 @@ do
         nv14)
             BUILD_OPTIONS+="-DPCB=NV14"
             ;;
+        el18)
+            BUILD_OPTIONS+="-DPCB=NV14 -DPCBREV=EL18"
+            ;;
         commando8)
             BUILD_OPTIONS+="-DPCB=X7 -DPCBREV=COMMANDO8"
             ;;