Variants

Variants are a set of parameters to configure FOC firmware for a specific use.

• Platformio - Remove the semicolon in front of the desired Variant in platformio.ini file
• Others - Uncomment the desired Variant by removing the leading // in Variant selection section of config.h file

Example Variants

• VARIANT_ADC: The motors are controlled by two potentiometers connected to the Left sensor cable (long wired)
• VARIANT_USART: The motors are controlled via serial protocol (e.g. on USART3 right sensor cable, the short wired cable). The commands can be sent from an Arduino. Check out the hoverserial.ino as an example sketch.
• VARIANT_NUNCHUK: Wii Nunchuk offers one hand control for throttle, braking and steering. This was one of the first input device used for electric armchairs or bottle crates.
• VARIANT_PPM: RC remote control with PPM Sum signal.
• VARIANT_PWM: RC remote control with PWM signal.
• VARIANT_IBUS: RC remote control with Flysky iBUS protocol.
• VARIANT_HOVERCAR: The motors are controlled by two pedals brake and throttle. Reverse is engaged by double tapping on the brake pedal at standstill.
• VARIANT_TRANSPOTTER: This is for transpotter build, which is a hoverboard based transportation system. For more details on how to build it check here and here.
• VARIANT_SKATEBOARD: This is for skateboard build, controlled using an RC remote with PWM signal connected to the right sensor cable.
• VARIANT_HOVERBOARD: The mainboard reads the two sideboards data. The sideboards need to be flashed with the hacked version. The balancing controller is not yet implemented.
• VARIANT_BBCAR: This is for a 4 wheel drive bobby car build.

Of course the firmware can be further customized for other needs or projects.

VARIANTS	ADC	USART	NUNCHUK	PPM	PWM	IBUS	HOVERCAR	TRANSPOTTER	SKATEBOARD	HOVERBOARD
CONTROL	ADC	USART	I2C	PPM	PWM	USART	ADC	ADC	PWM	USART
DEFAULT CABLE	LEFT	RIGHT	RIGHT	RIGHT	RIGHT	RIGHT	LEFT	LEFT	RIGHT	BOTH
CONTROL MODE	VOLTAGE	VOLTAGE	VOLTAGE	VOLTAGE	VOLTAGE	VOLTAGE	VOLTAGE	VOLTAGE	TORQUE	VOLTAGE
INPUT CMD1 CMD2	POT POT		MID POT MID POT	MID POT MID POT	MID POT MID POT	MID POT MID POT	POT POT	POT MID POT	N/A MID POT	SIDEBOARD SIDEBOARD
MIXER CMD1 CMD2	STEER SPEED	STEER SPEED	STEER SPEED	STEER SPEED	STEER SPEED	STEER SPEED	BRAKE THROTTLE	DISTANCE STEER	N/A THROTTLE/BRAKE	ANGLE LEFT ANGLE RIGHT
AUTO CALIBRATION	YES	YES	YES	YES	YES	YES	YES	NO	YES	NO
CURRENT MAX SPEED LIMIT	YES	YES	YES	YES	YES	YES	YES	NO	YES	NO

For the configuration/customizing of the variants, please check each variant's wiki page.