update runregression for new open-source setup #8
Comments
|
From [email protected] on February 16, 2009 17:26:01 r22 set this up. going with just 2 runs, debug of 32-bit and of 64-bit, and 7 Status: Verified |
This was referenced Nov 27, 2014
Open
Closed
This was referenced Nov 28, 2014
derekbruening
added a commit
that referenced
this issue
Jun 14, 2020
Adds new options and interfaces to specify alternate-bitwidth client
libraries for use when the application creates a child process of the
other bitwidth.
For DR, adds -client_lib32 and -client_lib64 options. Switches main
usage to use the appropriate option, with its contents then copied
into -client_lib (to avoid the pain of removing that options).
For drconfiglib, adds dr_register_client_ex() with
dr_client_iterator_next_ex() to support querying other-bitwidth client
registrations.
Adds a new libutil.drconfig_test for drconfiglib. Fixes a bug found
by the test: existing client queries were cutting off the last
character of the path and options.
For drrun and drconfig, adds "-c32" and "-c64" options, with an
additional "--" separating the client options between them.
For tool files, adds CLIENT{32,64}_{REL,ABS}. Updates drcov,
drcpusim, and drcachesim to use the new syntax and drcachesim's
launcher to process it. Tested these manually:
===========================================================================
$ ninja install
$ rm *.log
$ ../exports/bin64/drrun -t drcov -- ~/dr/test/execve64 ~/dr/test/hello32
$ l -t *.log
20K drcov.execve64.109583.0000.proc.log 20K drcov.execve64.109585.0000.proc.log
20K drcov.hello32.109585.0000.proc.log
$ rm -rf drm*.dir
$ ../exports/bin64/drrun -verbose -t drcachesim -verbose 1 -offline -- ~/dr/test/execve64 ~/dr/test/hello32
$ l -td *.dir
4.0K drmemtrace.hello32.117714.7095.dir/ 4.0K drmemtrace.execve64.117714.6260.dir/
4.0K drmemtrace.execve64.117713.9314.dir/
===========================================================================
Adds tests of -c32/-c64 to the existing cross-arch linux.execve{32,64}
tests (Windows won't work until #803 is addressed).
The tests look like this:
===========================================================================
$ cmake . && ctest -V -R 'linux.execve(32|64)'
8: Running test command: "/home/bruening/dr/git/build_x64_dbg_tests/bin64/drrun" "-32" "-dr_home" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/32bit" "-stderr_mask" "0xC" "-dumpcore_mask" "0" "-c32" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/32bit/suite/tests/bin/libclient.large_options.dll.so" "-paramA" "foo" "-paramB" "bar" "--" "-c64" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/bin/libclient.large_options.dll.so" "-paramA" "foo" "-paramB" "bar" "--" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/32bit/suite/tests/bin/linux.execve32" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/bin/linux.execve-sub64"
8: large_options passed: -paramA foo -paramB bar
8: parent is running under DynamoRIO
8: parent waiting for child
8: child is running under DynamoRIO
8: large_options passed: -paramA foo -paramB bar
8: it_worked
8: running under DynamoRIO
8: large_options exiting
8: child has exited
8: large_options exiting
8:
1/2 Test #8: linux.execve32 ................... Passed 3.93 sec
9: Test command: /home/bruening/dr/git/build_x64_dbg_tests/bin64/drrun "-stderr_mask" "0xC" "-dumpcore_mask" "0" "-c32" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/32bit/suite/tests/bin/libclient.large_options.dll.so" "-paramA" "foo" "-paramB" "bar" "--" "-c64" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/bin/libclient.large_options.dll.so" "-paramA" "foo" "-paramB" "bar" "--" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/bin/linux.execve64" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/32bit/suite/tests/bin/linux.execve-sub32"
9: Test timeout computed to be: 1500
9: large_options passed: -paramA foo -paramB bar
9: parent is running under DynamoRIO
9: parent waiting for child
9: child is running under DynamoRIO
9: large_options passed: -paramA foo -paramB bar
9: it_worked
9: running under DynamoRIO
9: large_options exiting
9: child has exited
9: large_options exiting
2/2 Test #9: linux.execve64 ................... Passed 0.86 sec
===========================================================================
Issue: #147, #803
Fixes: #147
derekbruening
added a commit
that referenced
this issue
Jun 15, 2020
Adds new options and interfaces to specify alternate-bitwidth client
libraries for use when the application creates a child process of the
other bitwidth.
For DR, adds -client_lib32 and -client_lib64 options. Switches main
usage to use the appropriate option, with its contents then copied
into -client_lib (to avoid the pain of removing that options).
For drconfiglib, adds dr_register_client_ex() with
dr_client_iterator_next_ex() to support querying other-bitwidth client
registrations.
Adds a new libutil.drconfig_test for drconfiglib. Fixes a UNIX bug
found by the test: existing client queries were cutting off the last
character of the path and options due to differing snprintf semantics.
Also fixes a Windows drconfig handle leak found by the test that
was preventing unregistration from deleting config files.
For drrun and drconfig, adds "-c32" and "-c64" options, with an
additional "--" separating the client options between them.
For tool files, adds CLIENT{32,64}_{REL,ABS}. Updates drcov,
drcpusim, and drcachesim to use the new syntax and drcachesim's
launcher to process it. Tested these manually:
===========================================================================
$ ninja install
$ rm *.log
$ ../exports/bin64/drrun -t drcov -- ~/dr/test/execve64 ~/dr/test/hello32
$ l -t *.log
20K drcov.execve64.109583.0000.proc.log 20K drcov.execve64.109585.0000.proc.log
20K drcov.hello32.109585.0000.proc.log
$ rm -rf drm*.dir
$ ../exports/bin64/drrun -verbose -t drcachesim -verbose 1 -offline -- ~/dr/test/execve64 ~/dr/test/hello32
$ l -td *.dir
4.0K drmemtrace.hello32.117714.7095.dir/ 4.0K drmemtrace.execve64.117714.6260.dir/
4.0K drmemtrace.execve64.117713.9314.dir/
===========================================================================
Adds tests of -c32/-c64 to the existing cross-arch linux.execve{32,64}
tests (Windows won't work until #803 is addressed).
The tests look like this:
===========================================================================
$ cmake . && ctest -V -R 'linux.execve(32|64)'
8: Running test command: "/home/bruening/dr/git/build_x64_dbg_tests/bin64/drrun" "-32" "-dr_home" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/32bit" "-stderr_mask" "0xC" "-dumpcore_mask" "0" "-c32" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/32bit/suite/tests/bin/libclient.large_options.dll.so" "-paramA" "foo" "-paramB" "bar" "--" "-c64" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/bin/libclient.large_options.dll.so" "-paramA" "foo" "-paramB" "bar" "--" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/32bit/suite/tests/bin/linux.execve32" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/bin/linux.execve-sub64"
8: large_options passed: -paramA foo -paramB bar
8: parent is running under DynamoRIO
8: parent waiting for child
8: child is running under DynamoRIO
8: large_options passed: -paramA foo -paramB bar
8: it_worked
8: running under DynamoRIO
8: large_options exiting
8: child has exited
8: large_options exiting
8:
1/2 Test #8: linux.execve32 ................... Passed 3.93 sec
9: Test command: /home/bruening/dr/git/build_x64_dbg_tests/bin64/drrun "-stderr_mask" "0xC" "-dumpcore_mask" "0" "-c32" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/32bit/suite/tests/bin/libclient.large_options.dll.so" "-paramA" "foo" "-paramB" "bar" "--" "-c64" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/bin/libclient.large_options.dll.so" "-paramA" "foo" "-paramB" "bar" "--" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/bin/linux.execve64" "/home/bruening/dr/git/build_x64_dbg_tests/suite/tests/32bit/suite/tests/bin/linux.execve-sub32"
9: Test timeout computed to be: 1500
9: large_options passed: -paramA foo -paramB bar
9: parent is running under DynamoRIO
9: parent waiting for child
9: child is running under DynamoRIO
9: large_options passed: -paramA foo -paramB bar
9: it_worked
9: running under DynamoRIO
9: large_options exiting
9: child has exited
9: large_options exiting
2/2 Test #9: linux.execve64 ................... Passed 0.86 sec
===========================================================================
Issue: #147, #803
Fixes: #147
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
From [email protected] on February 13, 2009 20:33:18
we need to remove the spec2000 references from "make runregression" and
suite/runregression
the set of tests run should probably be tweaked to reflect the current
priorities
it would be nice to have output sent outside of the source tree: xref PR
196865 and issue #6
and of course there is plenty of cleanup and enhancements that our tests
need, and we should set up some nightly regressions on machines somewhere,
but those will be filed as other cases
Original issue: http://code.google.com/p/dynamorio/issues/detail?id=8
The text was updated successfully, but these errors were encountered: