[build] Build tracer with ReadyToRun #5962
Merged
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
github-actions
bot
added
the
area:builds
Datadog ReportBranch report: ✅ 0 Failed, 361235 Passed, 2074 Skipped, 14h 42m 10.48s Total Time |
Execution-Time Benchmarks Report ⏱️Execution-time results for samples comparing the following branches/commits: Execution-time benchmarks measure the whole time it takes to execute a program. And are intended to measure the one-off costs. Cases where the execution time results for the PR are worse than latest master results are shown in red. The following thresholds were used for comparing the execution times:
Note that these results are based on a single point-in-time result for each branch. For full results, see the dashboard. Graphs show the p99 interval based on the mean and StdDev of the test run, as well as the mean value of the run (shown as a diamond below the graph). gantt
title Execution time (ms) FakeDbCommand (.NET Framework 4.6.2)
dateFormat X
axisFormat %s
todayMarker off
section Baseline
This PR (5962) - mean (70ms) : 67, 73
. : milestone, 70,
master - mean (70ms) : 66, 74
. : milestone, 70,
section CallTarget+Inlining+NGEN
This PR (5962) - mean (1,080ms) : 1057, 1102
. : milestone, 1080,
master - mean (1,084ms) : 1061, 1107
. : milestone, 1084,
gantt
title Execution time (ms) FakeDbCommand (.NET Core 3.1)
dateFormat X
axisFormat %s
todayMarker off
section Baseline
This PR (5962) - mean (110ms) : 104, 115
. : milestone, 110,
master - mean (109ms) : 105, 112
. : milestone, 109,
section CallTarget+Inlining+NGEN
This PR (5962) - mean (759ms) : 744, 774
. : milestone, 759,
master - mean (763ms) : 740, 786
. : milestone, 763,
gantt
title Execution time (ms) FakeDbCommand (.NET 6)
dateFormat X
axisFormat %s
todayMarker off
section Baseline
This PR (5962) - mean (93ms) : 88, 97
. : milestone, 93,
master - mean (93ms) : 89, 97
. : milestone, 93,
section CallTarget+Inlining+NGEN
This PR (5962) - mean (710ms) : 691, 729
. : milestone, 710,
master - mean (714ms) : 694, 733
. : milestone, 714,
gantt
title Execution time (ms) HttpMessageHandler (.NET Framework 4.6.2)
dateFormat X
axisFormat %s
todayMarker off
section Baseline
This PR (5962) - mean (191ms) : 187, 194
. : milestone, 191,
master - mean (191ms) : 188, 195
. : milestone, 191,
section CallTarget+Inlining+NGEN
This PR (5962) - mean (1,159ms) : 1128, 1190
. : milestone, 1159,
master - mean (1,165ms) : 1136, 1193
. : milestone, 1165,
gantt
title Execution time (ms) HttpMessageHandler (.NET Core 3.1)
dateFormat X
axisFormat %s
todayMarker off
section Baseline
This PR (5962) - mean (276ms) : 271, 280
. : milestone, 276,
master - mean (275ms) : 271, 279
. : milestone, 275,
section CallTarget+Inlining+NGEN
This PR (5962) - mean (919ms) : 899, 939
. : milestone, 919,
master - mean (923ms) : 898, 948
. : milestone, 923,
gantt
title Execution time (ms) HttpMessageHandler (.NET 6)
dateFormat X
axisFormat %s
todayMarker off
section Baseline
This PR (5962) - mean (265ms) : 260, 270
. : milestone, 265,
master - mean (265ms) : 260, 270
. : milestone, 265,
section CallTarget+Inlining+NGEN
This PR (5962) - mean (906ms) : 889, 923
. : milestone, 906,
master - mean (906ms) : 884, 929
. : milestone, 906,
|
Benchmarks Report for tracer 🐌Benchmarks for #5962 compared to master:
The following thresholds were used for comparing the benchmark speeds:
Allocation changes below 0.5% are ignored. Benchmark detailsBenchmarks.Trace.ActivityBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.AgentWriterBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.AspNetCoreBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.CIVisibilityProtocolWriterBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.DbCommandBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.ElasticsearchBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.GraphQLBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.HttpClientBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.ILoggerBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.Log4netBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.NLogBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.RedisBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.SerilogBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.SpanBenchmark - Same speed ✔️ Same allocations ✔️Raw results
Benchmarks.Trace.TraceAnnotationsBenchmark - Same speed ✔️ Same allocations ✔️Raw results
|
andrewlock
reviewed
Sep 2, 2024
….com/DataDog/dd-trace-dotnet into jordan.gonzalez/ready-to-run/linux-deb
….com/DataDog/dd-trace-dotnet into jordan.gonzalez/ready-to-run/linux-deb
andrewlock
approved these changes
Sep 6, 2024
Comment on lines
+59
to
+63
| # Keep trying to get the artifact for 30 minutes | ||
| downloadUrl="" | ||
| TIMEOUT=1800 | ||
| STARTED=0 | ||
| until (( STARTED == TIMEOUT )) || [ ! -z "${downloadUrl}" ] ; do |
There was a problem hiding this comment.
FYI this will 30mins for the first artifact and then 30 mins for the next one too. That's prob not what we really want, but it's not a big deal, and prob not worth fixing frankly! :D
There was a problem hiding this comment.
I think this is fine, I tested multiple times, and some artifacts were not available, so I think this is OK
|
|
||
| // Needed as we need to restore with the RuntimeIdentifier | ||
| DotNetRestore(s => s | ||
| .SetProjectFile(Solution.GetProject(Projects.DatadogTraceMsBuild)) |
There was a problem hiding this comment.
Do you really need this at all? 🤔 I'm about 90% sure you don't need this dll at all, and should be stripping it out of the layer. @tonyredondo can you confirm?
There was a problem hiding this comment.
It's stripped down later, but I want to make sure I build as close as possible to the current process, don't want to diverge much in case in the future we need to use some r2r binaries for other platforms like Azure!
There was a problem hiding this comment.
Just for info, I believe this is literally only used if you're using the tracer as part of your build process, so I think there's basically no chance you'll need it 😃
Co-authored-by: Andrew Lock <[email protected]>
also sent another upstream variable just in case we need it in the future
….com/DataDog/dd-trace-dotnet into jordan.gonzalez/ready-to-run/linux-deb
bouwkast
approved these changes
Sep 6, 2024
duncanista
added a commit
that referenced
this pull request
Sep 10, 2024
cherry-pick `5c5bec1b893b52c2364a2bf2b66c58a92e6d7d83` [5962](#5962) ## Summary of changes Allows tracer publishing to be compiled with [ReadyToRun](https://learn.microsoft.com/en-us/dotnet/core/deploying/ready-to-run) to improve Serverless workloads init duration. ## Reason for change It has showcased a 500ms init duration improvement for AWS Lambda. Potentially could be used for other workloads in the future. ## Implementation details Followed #4573 and [ReadyToRun](https://learn.microsoft.com/en-us/dotnet/core/deploying/ready-to-run) docs. ## Test coverage - Tested manually in AWS Lambda. ## Other details Increases tracer size by 3x. <!--⚠️ Note: where possible, please obtain 2 approvals prior to merging. Unless CODEOWNERS specifies otherwise, for external teams it is typically best to have one review from a team member, and one review from apm-dotnet. Trivial changes do not require 2 reviews. -->
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
Summary of changes
Allows tracer publishing to be compiled with ReadyToRun to improve Serverless workloads init duration.
Reason for change
It has showcased a 500ms init duration improvement for AWS Lambda. Potentially could be used for other workloads in the future.
Implementation details
Followed #4573 and ReadyToRun docs.
Test coverage
Other details
Increases tracer size by 3x.