dasharo-tools-suite/documentation/features.md: fix indent for EC Update

Signed-off-by: Eduard Kaverinskyi <[email protected]>

docs/dasharo-tools-suite/documentation/features.md

@@ -354,65 +354,65 @@ version. This is how we can achieve that.
 
 * Retrieve information about your current EC.
 
-  ```bash
-  dasharo_ectool info
-  ```
+```bash
+dasharo_ectool info
+```
 
-  The output of the above-described command should contain information about
-  the version of flashed firmware:
+The output of the above-described command should contain information about
+the version of flashed firmware:
 
-  ```bash
-  board: clevo/ns50mu
-  version: 2022-08-16_c12ff1a
-  ```
+```bash
+board: clevo/ns50mu
+version: 2022-08-16_c12ff1a
+```
 
 * Download the newest version of Embedded Controller firmware.
 * Plug in power supply, without it, flashing EC is not possible as losing power
   may cause in damaged firmware.
 * Flash Embedded Controller firmware internally.
 
-  ```bash
-  dasharo_ectool flash ec_file.rom
-  ```
-
-  The output of the above-described command should look as follows:
-
-  ```bash
-  file board: Ok("clevo/ns50mu")
-  file version: Ok("2022-08-16_c12ff1a")
-  ec board: Ok("clevo/ns50mu")
-  ec version: Ok("2022-08-31_cbff21b")
-  Waiting 5 seconds for all keys to be released
-  Sync
-  SPI Read 128K
-  Saving ROM to backup.rom
-  SPI Write 128K
-  SPI Read 128K
-  Successfully programmed SPI ROM
-  Result: Ok(())
-  Sync
-  System will shut off in 5 seconds
-  Sync
-  ```
-
-  > Note: this is example output, versions may differ
+```bash
+dasharo_ectool flash ec_file.rom
+```
+
+The output of the above-described command should look as follows:
+
+```bash
+file board: Ok("clevo/ns50mu")
+file version: Ok("2022-08-16_c12ff1a")
+ec board: Ok("clevo/ns50mu")
+ec version: Ok("2022-08-31_cbff21b")
+Waiting 5 seconds for all keys to be released
+Sync
+SPI Read 128K
+Saving ROM to backup.rom
+SPI Write 128K
+SPI Read 128K
+Successfully programmed SPI ROM
+Result: Ok(())
+Sync
+System will shut off in 5 seconds
+Sync
+```
+
+> Note: this is example output, versions may differ
 
 * Computer will shut down automatically.
 * Power on your computer. Booting process may take a while.
 * After boot, choose option `S` to drop to Shell.
 * Retrieve information about your updated EC.
 
-  ```bash
-  dasharo_ectool info
-  ```
+```bash
+dasharo_ectool info
+```
 
-  The output of the above-described command should contain information about
-  the version of flashed firmware:
+The output of the above-described command should contain information about
+the version of flashed firmware:
 
-  ```bash
-  board: clevo/ns50mu
-  version: 2022-08-31_cbff21b
-  ```
+```bash
+board: clevo/ns50mu
+version: 2022-08-31_cbff21b
+```
 
 ## Additional features