[Keymap] Improvements to KidBrazil keymap to better handle OLED/LED M…

…atrix timeout. (qmk#7688)

* Added KidBrazil custom keymap for CRKBD
-Custom Font
-Custom OLED output

* Added missing readme

* Oled Timeout Update for KidBrazil Keymap (#1)

* Setup Oled timeout based on simple timer

* Cleaned up comments and added timeout for LEDs

* Fixed some small errors

* Updated oled timout with matrix scan

* Updated oled timout with matrix scan

* Update withou eeprom

* Update timer code

* Use process user instead of keymap

* Added ifdef to protect oledtimer

* Updated with half timeout state for logo

* Removed middle tier timer

* Final cleanup of unused files

* Updated code as per suggestions & requests

* Second round of revisions

* Updated keymap to better handle LED timeout
- Added boolean to hold LED state
- Added init function to set rgb to known state
- Modified RGB_TOG to work with noeeprom commands

* Finished adding the timeout for OLED and testing on CRKBD

* Updated documentation

* fixed the timeout logic so it works as intended

* Update keyboards/crkbd/keymaps/kidbrazil/README.md

keyboards/crkbd/keymaps/kidbrazil/README.md

@@ -1,6 +1,6 @@
 # KidBrazil's custom CRKBD Layout
 
-![Crkbd](https://user-images.githubusercontent.com/736191/40575636-6fba63a4-6123-11e8-9ca0-3f990f1f9f4c.jpg)
+![Loose Transistor Crkbd](https://user-images.githubusercontent.com/4823043/71268460-0862c000-231b-11ea-8f32-2fe8da4d348a.jpg)
 
 This is a simple layout that I use for both programming and gaming. It is very
 closely based on the original CRKBD layout with some modifications to the
@@ -45,8 +45,19 @@ customize this with showing layer and USB information. I also tried my best to
 get a dormant / sleep state going but it is hit or miss and often only works on
 the master hand.
 
+## OLED & RGB Matrix timeout
+This keymap will set a automated timeout system for the OLED screen and the RGB
+matrix. After 3 minutes or so the LED screen will display the logo on both
+halves and 5 minutes after that both the LED and the Matrix will be switched
+off.
+
+Once a user hits the keys again, the LED matrix will turn back on unless the
+user has disabled it via RGB_TOG.
+
+## Flashing
+To flash this on your CRKBD simply use the `make crkbd:kidbrazil:flash`
+command.
+
 ### TODO
-- Fix OLED and Backlight so they turn off when the computer sleeps, currently
-  only the left hand does that and the LEDs still stay on.
 - Wait for Spit_common to be implemented in CRKBD and revisit the special color
   layers and animations

keyboards/crkbd/keymaps/kidbrazil/keymap.c

@@ -4,8 +4,10 @@
 extern uint8_t is_master;
 // Oled timer similar to Drashna's
 static uint32_t oled_timer = 0;
-// Boolean to store
-bool eeprom_oled_enabled = false;
+// Boolean to store LED state
+bool user_led_enabled = true;
+// Boolean to store the master LED clear so it only runs once.
+bool master_oled_cleared = false;
 
 // [CRKBD layers Init] -------------------------------------------------------//
 enum crkbd_layers {
@@ -54,19 +56,39 @@ const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
     )
 };
 
-//int RGB_current_mode;
+// [Post Init] --------------------------------------------------------------//
+void keyboard_post_init_user(void) {
+    // Set RGB to known state
+    rgb_matrix_enable_noeeprom();
+    rgb_matrix_set_color_all(RGB_GREEN);
+    user_led_enabled = true;
 
+}
 // [Process User Input] ------------------------------------------------------//
 bool process_record_user(uint16_t keycode, keyrecord_t *record) {
-    // Use process_record_keymap to reset timer on keypress
-    if (record->event.pressed) {
-        #ifdef OLED_DRIVER_ENABLE
-            oled_timer = timer_read32();
-        #endif
-        // Restore LEDs if they are enabled in eeprom
-        rgb_matrix_enable_noeeprom();
+    switch (keycode) {
+      case RGB_TOG:
+        if (record->event.pressed) {
+            // Toggle matrix on key press
+            user_led_enabled ? rgb_matrix_disable_noeeprom() : rgb_matrix_enable_noeeprom();
+        } else {
+            // Flip User_led_enabled variable on key release
+            user_led_enabled = !user_led_enabled;
+        }
+        return false; // Skip all further processing of this key
+      default:
+          // Use process_record_keymap to reset timer on all other keypresses
+          if (record->event.pressed) {
+              #ifdef OLED_DRIVER_ENABLE
+                  oled_timer = timer_read32();
+              #endif
+              // Restore LEDs if they are enabled by user
+              if (user_led_enabled) {
+                  rgb_matrix_enable_noeeprom();
+              }
+          }
+          return true;
     }
-    return true;
 }
 
 // [OLED Configuration] ------------------------------------------------------//
@@ -180,35 +202,47 @@ void render_master_oled(void) {
     }
 }
 
-// lave OLED scren (Right Hand)
+// Slave OLED scren (Right Hand)
 void render_slave_oled(void) {
     render_logo();
 }
 
 // {OLED Task} -----------------------------------------------//
 void oled_task_user(void) {
-      // Drashna style timeout for LED and OLED Roughly 8mins
-      if (timer_elapsed32(oled_timer) > 480000) {
-          oled_off();
-          rgb_matrix_disable_noeeprom();
-          return;
-      }
-      else {
-          oled_on();
-      }
-      // Show logo when USB dormant
-      switch (USB_DeviceState) {
-          case DEVICE_STATE_Unattached:
-          case DEVICE_STATE_Powered:
-          case DEVICE_STATE_Suspended:
-            render_logo();
-            break;
-          default:
-            if (is_master) {
-                render_master_oled();
-            } else {
-                render_slave_oled();
-            }
-      }
+    if (timer_elapsed32(oled_timer) > 80000 && timer_elapsed32(oled_timer) < 479999) {
+        // Render logo on both halves before full timeout
+        if (is_master && !master_oled_cleared) {
+            // Clear master OLED once so the logo renders properly
+            oled_clear();
+            master_oled_cleared = true;
+        }
+        render_logo();
+        return;
+    }
+    // Drashna style timeout for LED and OLED Roughly 8mins
+    else if (timer_elapsed32(oled_timer) > 480000) {
+        oled_off();
+        rgb_matrix_disable_noeeprom();
+        return;
+    }
+    else {
+        oled_on();
+        // Reset OLED Clear flag
+        master_oled_cleared = false;
+        // Show logo when USB dormant
+        switch (USB_DeviceState) {
+            case DEVICE_STATE_Unattached:
+            case DEVICE_STATE_Powered:
+            case DEVICE_STATE_Suspended:
+                render_logo();
+                break;
+            default:
+                if (is_master) {
+                    render_master_oled();
+                } else {
+                    render_slave_oled();
+                }
+        }
+    }
 }
 #endif