Skip to content

CopterTec/Marlin-Sovol_SV01

Repository files navigation

Marlin 3D Printer Firmware for Sovol SV01

GitHub GitHub contributors GitHub Release Date Build Status

Additional documentation can be found at the Marlin Home Page. Please let us know if Marlin misbehaves in any way. Volunteers are standing by!

Marlin 2.0

Marlin 2.0 takes this popular RepRap firmware to the next level by adding support for much faster 32-bit and ARM-based boards while improving support for 8-bit AVR boards. Read about Marlin's decision to use a "Hardware Abstraction Layer" below.

Download earlier versions of Marlin on the Releases page.

Configuring Marlin 2.0

You can find the Configuration Files for Marlin in the Folder "config". Choose the correct Version according to your printer and copy the folders entire content over the "Marlin" directory.

Building Marlin 2.0

To build Marlin 2.0 you'll need Arduino IDE 1.8.8 or newer or PlatformIO. Detailed build and install instructions are posted at:

Supported Platforms

Printer name Circuit board Probe Firmware prefix Printer info screen
Sovol SV01 Original nothing nothing CopterTec
Sovol SV01 Original BLTouch BLTouch CopterTec BT
Sovol SV01 SilentBoard nothing SilentBoard CopterTec SB
Sovol SV01 SilentBoard BLTouch SilentBoard_BLTouch CopterTec SBBT
Sovol SV01 Silent Mainboard 1.1.5 nothing SilentBoard CopterTec SB
Sovol SV01 Silent Mainboard 1.1.5 BLTouch SilentBoard_BLTouch CopterTec SBBT

Submitting Changes

Marlin Support

For best results getting help with configuration and troubleshooting, please use the following resources:

Credits

The current Marlin dev team consists of:

Modification for Sovol SV01:

License

Marlin is published under the GPL license because we believe in open development. The GPL comes with both rights and obligations. Whether you use Marlin firmware as the driver for your open or closed-source product, you must keep Marlin open, and you must provide your compatible Marlin source code to end users upon request. The most straightforward way to comply with the Marlin license is to make a fork of Marlin on Github, perform your modifications, and direct users to your modified fork.

While we can't prevent the use of this code in products (3D printers, CNC, etc.) that are closed source or crippled by a patent, we would prefer that you choose another firmware or, better yet, make your own.

The CopterTec logo and related marks are trademarks of CopterTec, a company by Fabian Briese. All rights reserved.