MIB Support by Vendor (Work in progress)

3COM

All current 3COM functions make use of standard MIBs BRIDGE-MIB and IF-MIB.

complete_3com_ifName

• MIBs BRIDGE-MIB
• IF-MIB

get_3Com_dot1dTpFdbEntry_ports

• MIBs BRIDGE-MIB
• IF-MIB

get_3Com_base_dot1dTpFdbEntry_ports

• MIBs BRIDGE-MIB
• IF-MIB

Cabletron System acquired by Extreme Networks

Deprecated

Information is NOT accurate

get_cabletron_switch_ports

OID	MIB
1.3.6.1.4.1.52.4.2.4.2.1.1.1.1.1.1.1	CTRON-SFPS-ESYS-MIB
1.3.6.1.4.1.52.4.2.4.2.2.3.6.1.1.6	CTRON-SFPS-ESYS-MIB
1.3.6.1.4.1.52.4.2.4.2.2.3.6.1.1.8	CTRON-SFPS-ESYS-MIB

get_base_sfps_ports

OID	MIB
1.3.6.1.4.1.52.4.1.1.1.4.1.1.4.0	CTRON-REMOTE-ACCESS-MIB
1.3.6.1.4.1.52.4.1.1.1.4.1.1.5.0	CTRON-REMOTE-ACCESS-MIB

Cisco functions

Cisco functions make use of several standard MIBs like BRIDGE-MIB or IF-MIB but they also make use of Cisco MIBs as described below.

If you are having issues on getting the data for these functions, make sure your device supports the MIB described depending on the function you are declaring.

Cisco SNMP Object Navigator

Cisco MIB Locator

get_catalyst_dot1dTpFdbEntry_ports

OID	MIB Name
1.3.6.1.4.1.9.9.46.1.3.1.1.2	CISCO-VTP-MIB
1.3.6.1.4.1.9.9.46.1.3.1.1.4	CISCO-VTP-MIB
1.3.6.1.4.1.9.9.46.1.6.1.1.14	CISCO-VTP-MIB
1.3.6.1.2.1.2.2.1.1	IF-MIB
1.3.6.1.4.1.9.9.87.1.4.1.1.37	CISCO-C2900-MIB
1.3.6.1.4.1.9.9.68.1.5.1.1.1	CISCO-VLAN-MEMBERSHIP-MIB
1.3.6.1.4.1.9.5.1.4.1.1.4	CISCO-STACK-MIB
1.3.6.1.4.1.9.5.1.9.3.1.8	CISCO-STACK-MIB

get_IOS_dot1dTpFdbEntry_ports

OID	MIB Name
1.3.6.1.4.1.9.9.46.1.3.1.1.2	CISCO-VTP-MIB
1.3.6.1.4.1.9.9.46.1.3.1.1.4	CISCO-VTP-MIB
1.3.6.1.4.1.9.9.46.1.6.1.1.14	CISCO-VTP-MIB
1.3.6.1.4.1.9.9.87.1.4.1.1.37	CISCO-C2900-MIB
1.3.6.1.4.1.9.9.68.1.5.1.1.1	CISCO-VLAN-MEMBERSHIP-MIB

get_cisco_dhcpsnooping_table

OID	MIB Name
1.3.6.1.4.1.9.9.380.1.4.1.1.5	CISCO-DHCP-SNOOPING-MIB
1.3.6.1.4.1.9.9.46.1.3.1.1.2	CISCO-VTP-MIB
1.3.6.1.4.1.9.9.46.1.3.1.1.4	CISCO-VTP-MIB
1.3.6.1.4.1.9.9.380.1.4.1.1.4	CISCO-DHCP-SNOOPING-MIB

get_cisco_dot1x_table

OID	Object name	MIB Name
1.3.6.1.4.1.9.9.656.1.4.1.1.10	cafSessionAuthUserName	CISCO-AUTH-FRAMEWORK-MIB
1.3.6.1.4.1.9.9.656.1.4.1.1.2	cafSessionClientMacAddress	CISCO-AUTH-FRAMEWORK-MIB
1.3.6.1.4.1.9.9.656.1.4.1.1.4	cafSessionClientAddress	CISCO-AUTH-FRAMEWORK-MIB
1.3.6.1.4.1.9.9.656.1.4.1.1.6	cafSessionDomain	CISCO-AUTH-FRAMEWORK-MIB
1.3.6.1.4.1.9.9.656.1.4.1.1.5	cafSessionStatus	CISCO-AUTH-FRAMEWORK-MIB

Dell

All current Dell functions make use of standard MIBs BRIDGE-MIB and IF-MIB.

get_dell_dot1q_switch_ports

• MIBs BRIDGE-MIB
• IF-MIB

get_base_dell_dot1qFdb_ports

• MIBs BRIDGE-MIB
• IF-MIB

Dlink

All current Dlink functions make use of standard MIBs BRIDGE-MIB and IF-MIB.

get_dlink_l2_switch_ports

• MIBs BRIDGE-MIB
• IF-MIB
• Q-BRIDGE-MIB

get_dlink_l2_dot1dTpFdbEntry_ports

• MIBs BRIDGE-MIB
• IF-MIB
• Q-BRIDGE-MIB

Enterasys acquired by Extreme Networks

It seems to be mainly be making use of Standard MIBs but there are also other OIDs around 1.3.6.1.4.1.52.4.1

---

Note: review needed. Maybe consolidate them onto mactrack_extreme.php

Extreme

• EXTREME-SYSTEM-MIB