Improve max temp / target

Marlin/Configuration.h

@@ -484,6 +484,7 @@
  */
 #define HOTEND_OVERSHOOT 15   // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
 #define BED_OVERSHOOT    10   // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
+#define COOLER_OVERSHOOT  2   // (°C) Forbid temperatures closer than OVERSHOOT
 
 //===========================================================================
 //============================= PID Settings ================================

Marlin/src/gcode/host/M360.cpp

@@ -177,7 +177,7 @@ void GcodeSuite::M360() {
       config_line_e(e, PSTR("MaxSpeed"), planner.settings.max_feedrate_mm_s[E_AXIS_N(e)]);
       config_line_e(e, PSTR("Acceleration"), planner.settings.max_acceleration_mm_per_s2[E_AXIS_N(e)]);
       config_line_e(e, PSTR("Diameter"), TERN(NO_VOLUMETRICS, DEFAULT_NOMINAL_FILAMENT_DIA, planner.filament_size[e]));
-      config_line_e(e, PSTR("MaxTemp"), thermalManager.heater_maxtemp[e]);
+      config_line_e(e, PSTR("MaxTemp"), thermalManager.hotend_maxtemp[e]);
     }
   #endif
 }

Marlin/src/gcode/parser.h

@@ -390,15 +390,13 @@ class GCodeParser {
       }
     }
 
-    #define TEMP_UNIT(N) parser.to_temp_units(N)
-
   #else // !TEMPERATURE_UNITS_SUPPORT
 
+    static inline float to_temp_units(int16_t c) { return (float)c; }
+
     static inline float value_celsius()      { return value_float(); }
     static inline float value_celsius_diff() { return value_float(); }
 
-    #define TEMP_UNIT(N) (N)
-
   #endif // !TEMPERATURE_UNITS_SUPPORT
 
   static inline feedRate_t value_feedrate() { return MMM_TO_MMS(value_linear_units()); }

Marlin/src/inc/Conditionals_post.h

@@ -2025,11 +2025,17 @@
   #undef PIDTEMPBED
 #endif
 
-#if HAS_HEATED_BED || HAS_TEMP_CHAMBER
-  #define BED_OR_CHAMBER 1
-#endif
 #if HAS_TEMP_COOLER && PIN_EXISTS(COOLER)
   #define HAS_COOLER 1
+  #ifndef COOLER_OVERSHOOT
+    #define COOLER_OVERSHOOT 2
+  #endif
+  #define COOLER_MIN_TARGET (COOLER_MINTEMP + (COOLER_OVERSHOOT))
+  #define COOLER_MAX_TARGET (COOLER_MAXTEMP - (COOLER_OVERSHOOT))
+#endif
+
+#if HAS_HEATED_BED || HAS_TEMP_CHAMBER
+  #define BED_OR_CHAMBER 1
 #endif
 #if HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE || HAS_TEMP_COOLER
   #define HAS_TEMP_SENSOR 1

Marlin/src/lcd/dwin/e3v2/dwin.cpp

@@ -112,12 +112,6 @@
 #define MAX_PRINT_SPEED   999
 #define MIN_PRINT_SPEED   10
 
-// Temp limits
-#if HAS_HOTEND
-  #define MAX_E_TEMP    (HEATER_0_MAXTEMP - (HOTEND_OVERSHOOT))
-  #define MIN_E_TEMP    HEATER_0_MINTEMP
-#endif
-
 #if HAS_HEATED_BED
   #define MIN_BED_TEMP  BED_MINTEMP
 #endif
@@ -1357,7 +1351,7 @@ void HMI_Move_Z() {
         return;
       }
       // E_Temp limit
-      LIMIT(HMI_ValueStruct.E_Temp, MIN_E_TEMP, MAX_E_TEMP);
+      LIMIT(HMI_ValueStruct.E_Temp, HEATER_0_MINTEMP, thermalManager.hotend_max_target(0));
       // E_Temp value
       DWIN_Draw_IntValue(true, true, 0, font8x16, Color_White, Select_Color, 3, 216, MBASE(temp_line), HMI_ValueStruct.E_Temp);
     }

Marlin/src/lcd/extui/ui_api.cpp

@@ -924,7 +924,7 @@ namespace ExtUI {
     enableHeater(heater);
     switch (heater) {
       #if HAS_HEATED_CHAMBER
-        case CHAMBER: thermalManager.setTargetChamber(LROUND(constrain(value, 0, CHAMBER_MAXTEMP - 10))); break;
+        case CHAMBER: thermalManager.setTargetChamber(LROUND(constrain(value, 0, CHAMBER_MAX_TARGET))); break;
       #endif
       #if HAS_COOLER
         case COOLER: thermalManager.setTargetCooler(LROUND(constrain(value, 0, COOLER_MAXTEMP))); break;
@@ -935,7 +935,7 @@ namespace ExtUI {
       default: {
         #if HAS_HOTEND
           const int16_t e = heater - H0;
-          thermalManager.setTargetHotend(LROUND(constrain(value, 0, thermalManager.heater_maxtemp[e] - HOTEND_OVERSHOOT)), e);
+          thermalManager.setTargetHotend(LROUND(constrain(value, 0, thermalManager.hotend_max_target(e))), e);
         #endif
       } break;
     }
@@ -949,7 +949,7 @@ namespace ExtUI {
     #if HAS_HOTEND
       const int16_t e = extruder - E0;
       enableHeater(extruder);
-      thermalManager.setTargetHotend(LROUND(constrain(value, 0, thermalManager.heater_maxtemp[e] - HOTEND_OVERSHOOT)), e);
+      thermalManager.setTargetHotend(LROUND(constrain(value, 0, thermalManager.hotend_max_target(e))), e);
     #endif
   }
 

Marlin/src/lcd/menu/menu_advanced.cpp

@@ -315,7 +315,7 @@ void menu_backlash();
     #if ENABLED(PID_AUTOTUNE_MENU)
       #define HOTEND_PID_EDIT_MENU_ITEMS(N) \
         _HOTEND_PID_EDIT_MENU_ITEMS(N); \
-        EDIT_ITEM_FAST_N(int3, N, MSG_PID_AUTOTUNE_E, &autotune_temp[N], 150, thermalManager.heater_maxtemp[N] - HOTEND_OVERSHOOT, []{ _lcd_autotune(heater_id_t(MenuItemBase::itemIndex)); });
+        EDIT_ITEM_FAST_N(int3, N, MSG_PID_AUTOTUNE_E, &autotune_temp[N], 150, thermalManager.hotend_max_target(N), []{ _lcd_autotune(heater_id_t(MenuItemBase::itemIndex)); });
     #else
       #define HOTEND_PID_EDIT_MENU_ITEMS(N) _HOTEND_PID_EDIT_MENU_ITEMS(N);
     #endif

Marlin/src/lcd/menu/menu_filament.cpp

@@ -95,7 +95,7 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) {
       ACTION_ITEM_N_S(m, ui.get_preheat_label(m), MSG_PREHEAT_M, _change_filament_with_preset);
   #endif
   EDIT_ITEM_FAST_N(int3, extruder, MSG_PREHEAT_CUSTOM, &thermalManager.temp_hotend[extruder].target,
-    EXTRUDE_MINTEMP, thermalManager.heater_maxtemp[extruder] - HOTEND_OVERSHOOT,
+    EXTRUDE_MINTEMP, thermalManager.hotend_max_target(extruder),
     _change_filament_with_custom
   );
   END_MENU();

Marlin/src/lcd/menu/menu_temperature.cpp

@@ -47,11 +47,11 @@
 // "Temperature" submenu items
 //
 
-void Temperature::lcd_preheat(const int16_t e, const int8_t indh, const int8_t indb) {
+void Temperature::lcd_preheat(const uint8_t e, const int8_t indh, const int8_t indb) {
   UNUSED(e); UNUSED(indh); UNUSED(indb);
   #if HAS_HOTEND
     if (indh >= 0 && ui.material_preset[indh].hotend_temp > 0)
-      setTargetHotend(_MIN(thermalManager.heater_maxtemp[e] - HOTEND_OVERSHOOT, ui.material_preset[indh].hotend_temp), e);
+      setTargetHotend(_MIN(thermalManager.hotend_max_target(e), ui.material_preset[indh].hotend_temp), e);
   #endif
   #if HAS_HEATED_BED
     if (indb >= 0 && ui.material_preset[indb].bed_temp > 0) setTargetBed(ui.material_preset[indb].bed_temp);
@@ -70,7 +70,7 @@ void Temperature::lcd_preheat(const int16_t e, const int8_t indh, const int8_t i
     void do_preheat_end_m() { _preheat_end(editable.int8, 0); }
   #endif
   #if HAS_HEATED_BED
-    inline void _preheat_bed(const uint8_t m) { thermalManager.lcd_preheat(-1, -1, m); }
+    inline void _preheat_bed(const uint8_t m) { thermalManager.lcd_preheat(0, -1, m); }
   #endif
   #if HAS_COOLER
     inline void _precool_laser(const uint8_t m, const uint8_t e) { thermalManager.lcd_preheat(e, m, -1); }
@@ -163,15 +163,15 @@ void menu_temperature() {
   // Nozzle [1-5]:
   //
   #if HOTENDS == 1
-    EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - (HOTEND_OVERSHOOT), []{ thermalManager.start_watching_hotend(0); });
+    EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, thermalManager.hotend_max_target(0), []{ thermalManager.start_watching_hotend(0); });
   #elif HAS_MULTI_HOTEND
     HOTEND_LOOP()
-      EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, thermalManager.heater_maxtemp[e] - (HOTEND_OVERSHOOT), []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
+      EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, thermalManager.hotend_max_target(e), []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
   #endif
 
   #if ENABLED(SINGLENOZZLE_STANDBY_TEMP)
     LOOP_S_L_N(e, 1, EXTRUDERS)
-      EDIT_ITEM_FAST_N(uint16_3, e, MSG_NOZZLE_STANDBY, &thermalManager.singlenozzle_temp[e], 0, thermalManager.heater_maxtemp[0] - (HOTEND_OVERSHOOT));
+      EDIT_ITEM_FAST_N(uint16_3, e, MSG_NOZZLE_STANDBY, &thermalManager.singlenozzle_temp[e], 0, thermalManager.hotend_max_target(0));
   #endif
 
   //
@@ -185,7 +185,7 @@ void menu_temperature() {
   // Chamber:
   //
   #if HAS_HEATED_CHAMBER
-    EDIT_ITEM_FAST(int3, MSG_CHAMBER, &thermalManager.temp_chamber.target, 0, CHAMBER_MAXTEMP - 10, thermalManager.start_watching_chamber);
+    EDIT_ITEM_FAST(int3, MSG_CHAMBER, &thermalManager.temp_chamber.target, 0, CHAMBER_MAX_TARGET, thermalManager.start_watching_chamber);
   #endif
 
   //
@@ -194,7 +194,7 @@ void menu_temperature() {
   #if HAS_COOLER
     editable.state = cooler.is_enabled();
     EDIT_ITEM(bool, MSG_COOLER(TOGGLE), &cooler.state, []{ if (editable.state) cooler.disable(); else cooler.enable(); });
-    EDIT_ITEM_FAST(int3, MSG_COOLER, &thermalManager.temp_cooler.target, COOLER_MINTEMP + 2, COOLER_MAXTEMP - 2, thermalManager.start_watching_cooler);
+    EDIT_ITEM_FAST(int3, MSG_COOLER, &thermalManager.temp_cooler.target, COOLER_MIN_TARGET, COOLER_MAX_TARGET, thermalManager.start_watching_cooler);
   #endif
 
   //

Marlin/src/lcd/menu/menu_tune.cpp

@@ -126,15 +126,15 @@ void menu_tune() {
   // Nozzle [1-4]:
   //
   #if HOTENDS == 1
-    EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, HEATER_0_MAXTEMP - HOTEND_OVERSHOOT, []{ thermalManager.start_watching_hotend(0); });
+    EDIT_ITEM_FAST(int3, MSG_NOZZLE, &thermalManager.temp_hotend[0].target, 0, thermalManager.hotend_max_target(0), []{ thermalManager.start_watching_hotend(0); });
   #elif HAS_MULTI_HOTEND
     HOTEND_LOOP()
-      EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, thermalManager.heater_maxtemp[e] - HOTEND_OVERSHOOT, []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
+      EDIT_ITEM_FAST_N(int3, e, MSG_NOZZLE_N, &thermalManager.temp_hotend[e].target, 0, thermalManager.hotend_max_target(e), []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
   #endif
 
   #if ENABLED(SINGLENOZZLE_STANDBY_TEMP)
     LOOP_S_L_N(e, 1, EXTRUDERS)
-      EDIT_ITEM_FAST_N(uint16_3, e, MSG_NOZZLE_STANDBY, &thermalManager.singlenozzle_temp[e], 0, thermalManager.heater_maxtemp[0] - HOTEND_OVERSHOOT);
+      EDIT_ITEM_FAST_N(uint16_3, e, MSG_NOZZLE_STANDBY, &thermalManager.singlenozzle_temp[e], 0, thermalManager.hotend_max_target(0));
   #endif
 
   //

Marlin/src/lcd/menu/menu_ubl.cpp

@@ -126,7 +126,7 @@ void _lcd_ubl_custom_mesh() {
   START_MENU();
   BACK_ITEM(MSG_UBL_BUILD_MESH_MENU);
   #if HAS_HOTEND
-    EDIT_ITEM(int3, MSG_UBL_HOTEND_TEMP_CUSTOM, &custom_hotend_temp, EXTRUDE_MINTEMP, HEATER_0_MAXTEMP - HOTEND_OVERSHOOT);
+    EDIT_ITEM(int3, MSG_UBL_HOTEND_TEMP_CUSTOM, &custom_hotend_temp, EXTRUDE_MINTEMP, thermalManager.hotend_max_target(0));
   #endif
   #if HAS_HEATED_BED
     EDIT_ITEM(int3, MSG_UBL_BED_TEMP_CUSTOM, &custom_bed_temp, BED_MINTEMP, BED_MAX_TARGET);

Marlin/src/lcd/tft/touch.cpp

@@ -186,25 +186,25 @@ void Touch::touch(touch_control_t *control) {
       ui.clear_lcd();
       if (heater >= 0) { // HotEnd
         #if HOTENDS == 1
-          MenuItem_int3::action((const char *)GET_TEXT_F(MSG_NOZZLE), &thermalManager.temp_hotend[0].target, 0, thermalManager.heater_maxtemp[0] - 15, []{ thermalManager.start_watching_hotend(0); });
+          MenuItem_int3::action((const char *)GET_TEXT_F(MSG_NOZZLE), &thermalManager.temp_hotend[0].target, 0, thermalManager.hotend_max_target(0), []{ thermalManager.start_watching_hotend(0); });
         #else
           MenuItemBase::itemIndex = heater;
-          MenuItem_int3::action((const char *)GET_TEXT_F(MSG_NOZZLE_N), &thermalManager.temp_hotend[heater].target, 0, thermalManager.heater_maxtemp[heater] - 15, []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
+          MenuItem_int3::action((const char *)GET_TEXT_F(MSG_NOZZLE_N), &thermalManager.temp_hotend[heater].target, 0, thermalManager.hotend_max_target(heater), []{ thermalManager.start_watching_hotend(MenuItemBase::itemIndex); });
         #endif
       }
       #if HAS_HEATED_BED
         else if (heater == H_BED) {
-          MenuItem_int3::action((const char *)GET_TEXT_F(MSG_BED), &thermalManager.temp_bed.target, 0, BED_MAXTEMP - 10, thermalManager.start_watching_bed);
+          MenuItem_int3::action((const char *)GET_TEXT_F(MSG_BED), &thermalManager.temp_bed.target, 0, BED_MAX_TARGET, thermalManager.start_watching_bed);
         }
       #endif
       #if HAS_HEATED_CHAMBER
         else if (heater == H_CHAMBER) {
-          MenuItem_int3::action((const char *)GET_TEXT_F(MSG_CHAMBER), &thermalManager.temp_chamber.target, 0, CHAMBER_MAXTEMP - 10, thermalManager.start_watching_chamber);
+          MenuItem_int3::action((const char *)GET_TEXT_F(MSG_CHAMBER), &thermalManager.temp_chamber.target, 0, CHAMBER_MAX_TARGET, thermalManager.start_watching_chamber);
         }
       #endif
       #if HAS_COOLER
         else if (heater == H_COOLER) {
-          MenuItem_int3::action((const char *)GET_TEXT_F(MSG_COOLER), &thermalManager.temp_cooler.target, 0, COOLER_MAXTEMP - 8, thermalManager.start_watching_cooler);
+          MenuItem_int3::action((const char *)GET_TEXT_F(MSG_COOLER), &thermalManager.temp_cooler.target, 0, COOLER_MAX_TARGET, thermalManager.start_watching_cooler);
         }
       #endif
 

Marlin/src/module/settings.cpp

@@ -3386,10 +3386,10 @@ void MarlinSettings::reset() {
         SERIAL_ECHOLNPAIR_P(
           PSTR("  M145 S"), i
           #if HAS_HOTEND
-            , PSTR(" H"), TEMP_UNIT(ui.material_preset[i].hotend_temp)
+            , PSTR(" H"), parser.to_temp_units(ui.material_preset[i].hotend_temp)
           #endif
           #if HAS_HEATED_BED
-            , SP_B_STR, TEMP_UNIT(ui.material_preset[i].bed_temp)
+            , SP_B_STR, parser.to_temp_units(ui.material_preset[i].bed_temp)
           #endif
           #if HAS_FAN
             , PSTR(" F"), ui.material_preset[i].fan_speed

Marlin/src/module/temperature.cpp

@@ -253,7 +253,7 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
 
 #if HAS_HOTEND
   hotend_info_t Temperature::temp_hotend[HOTEND_TEMPS]; // = { 0 }
-  const uint16_t Temperature::heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP, HEATER_6_MAXTEMP, HEATER_7_MAXTEMP);
+  const uint16_t Temperature::hotend_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP, HEATER_5_MAXTEMP, HEATER_6_MAXTEMP, HEATER_7_MAXTEMP);
 #endif
 
 #if ENABLED(AUTO_POWER_E_FANS)
@@ -267,6 +267,7 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY,
 #if ENABLED(AUTO_POWER_COOLER_FAN)
   uint8_t Temperature::coolerfan_speed; // = 0
 #endif
+
 #if HAS_FAN
 
   uint8_t Temperature::fan_speed[FAN_COUNT]; // = { 0 }
@@ -552,7 +553,7 @@ volatile bool Temperature::raw_temps_ready = false;
 
     TERN_(HAS_AUTO_FAN, next_auto_fan_check_ms = next_temp_ms + 2500UL);
 
-    if (target > GHV(CHAMBER_MAX_TARGET, BED_MAX_TARGET, temp_range[heater_id].maxtemp - HOTEND_OVERSHOOT)) {
+    if (target > GHV(CHAMBER_MAX_TARGET, BED_MAX_TARGET, temp_range[heater_id].maxtemp - (HOTEND_OVERSHOOT))) {
       SERIAL_ECHOLNPGM(STR_PID_TEMP_TOO_HIGH);
       TERN_(EXTENSIBLE_UI, ExtUI::onPidTuning(ExtUI::result_t::PID_TEMP_TOO_HIGH));
       return;
@@ -1512,7 +1513,7 @@ void Temperature::manage_heater() {
 
     if (cooler.is_enabled()) {
       flag_cooler_state = true; // used to allow M106 fan control when cooler is disabled
-      if (temp_cooler.target == 0) temp_cooler.target = COOLER_MINTEMP;
+      if (temp_cooler.target == 0) temp_cooler.target = COOLER_MIN_TARGET;
       if (ELAPSED(ms, next_cooler_check_ms)) {
         next_cooler_check_ms = ms + COOLER_CHECK_INTERVAL;
         if (temp_cooler.celsius > temp_cooler.target) {

Marlin/src/module/temperature.h

@@ -323,7 +323,8 @@ class Temperature {
     #if HAS_HOTEND
       #define HOTEND_TEMPS (HOTENDS + ENABLED(TEMP_SENSOR_1_AS_REDUNDANT))
       static hotend_info_t temp_hotend[HOTEND_TEMPS];
-      static const uint16_t heater_maxtemp[HOTENDS];
+      static const uint16_t hotend_maxtemp[HOTENDS];
+      FORCE_INLINE static uint16_t hotend_max_target(const uint8_t e) { return hotend_maxtemp[e] - (HOTEND_OVERSHOOT); }
     #endif
     TERN_(HAS_HEATED_BED, static bed_info_t temp_bed);
     TERN_(HAS_TEMP_PROBE, static probe_info_t temp_probe);
@@ -639,7 +640,7 @@ class Temperature {
             start_preheat_time(ee);
         #endif
         TERN_(AUTO_POWER_CONTROL, if (celsius) powerManager.power_on());
-        temp_hotend[ee].target = _MIN(celsius, temp_range[ee].maxtemp - HOTEND_OVERSHOOT);
+        temp_hotend[ee].target = _MIN(celsius, hotend_max_target(ee));
         start_watching_hotend(ee);
       }
 
@@ -785,13 +786,7 @@ class Temperature {
 
     #if HAS_COOLER
       static void setTargetCooler(const int16_t celsius) {
-        temp_cooler.target =
-          #ifdef COOLER_MAXTEMP
-            _MIN(celsius, COOLER_MAXTEMP - 10)
-          #else
-            celsius
-          #endif
-        ;
+        temp_cooler.target = constrain(celsius, COOLER_MIN_TARGET, COOLER_MAX_TARGET);
         start_watching_cooler();
       }
     #endif
@@ -878,7 +873,7 @@ class Temperature {
     TERN_(HAS_DISPLAY, static void set_heating_message(const uint8_t e));
 
     #if HAS_LCD_MENU && HAS_TEMPERATURE
-      static void lcd_preheat(const int16_t e, const int8_t indh, const int8_t indb);
+      static void lcd_preheat(const uint8_t e, const int8_t indh, const int8_t indb);
     #endif
 
   private: