Upgrade master

docs/contributing.md

@@ -63,6 +63,7 @@ Most of our style is pretty easy to pick up on. If you are familiar with either
 
 We have a few different types of changes in QMK, each requiring a different level of rigor. We'd like you to keep the following guidelines in mind no matter what type of change you're making.
 
+* **Before you contribute:** Please make sure your fork is up to date with the upstream `qmk_firmware` repo. This will help minimize CI failures that may not occur for you when compiling locally.
 * Separate PRs into logical units. For example, do not submit one PR covering two separate features, instead submit a separate PR for each feature.
 * Check for unnecessary whitespace with `git diff --check` before committing.
 * Make sure your code change actually compiles.

docs/pr_checklist.md

@@ -42,7 +42,7 @@ If there are any inconsistencies with these recommendations, you're best off [cr
 
 - `#include QMK_KEYBOARD_H` preferred to including specific board files
 - prefer layer `enum`s to `#define`s
-- require custom keycode `enum`s to `#define`s, first entry must have ` = SAFE_RANGE`
+- custom keycode `enum`s must have first entry `= SAFE_RANGE`
 - terminating backslash (`\`) in lines of LAYOUT macro parameters is superfluous and should be removed
 - some care with spacing (e.g., alignment on commas or first char of keycodes) makes for a much nicer-looking keymap
 

keyboards/binepad/bn009/keymaps/default/keymap.json

@@ -1,5 +1,5 @@
 {
-    "keyboard": "binepad/bn009r2",
+    "keyboard": "binepad/bn009/r2",
     "version": 1,
     "author": "binepad",
     "notes": "This file is a keymap.json file for binepad/bn009r2",

keyboards/binepad/bn009/keymaps/via/keymap.json

@@ -4,7 +4,7 @@
           "via": true
       }
   },
-  "keyboard": "binepad/bn009r2",
+  "keyboard": "binepad/bn009/r2",
   "version": 1,
   "author": "binepad",
   "notes": "This file is a keymap.json file for binepad/bn009r2",

keyboards/chouchou/config.h

@@ -0,0 +1,7 @@
+// Copyright 2023 Dane Lipscombe (@dlip)
+// SPDX-License-Identifier: GPL-2.0-or-later
+
+#pragma once
+
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET
+#define RP2040_BOOTLOADER_DOUBLE_TAP_RESET_TIMEOUT 1000U

keyboards/chouchou/info.json

@@ -0,0 +1,52 @@
+{
+    "manufacturer": "dlip",
+    "keyboard_name": "chouchou",
+    "maintainer": "dlip",
+    "bootloader": "rp2040",
+    "features": {
+        "bootmagic": true,
+        "command": false,
+        "console": false,
+        "extrakey": true,
+        "mousekey": false,
+        "nkro": true
+    },
+    "matrix_pins": {
+        "direct": [
+            ["GP0", "GP1", "GP2", "GP3", "GP4", "GP5", "GP6", "GP7", "GP8", "GP9", "GP10", "GP11", "GP12", "GP13", "GP14", "GP15", "GP26", "GP27", "GP28", "GP29"]
+        ]
+    },
+    "processor": "RP2040",
+    "url": "https://github.com/dlip/chouchou",
+    "usb": {
+        "device_version": "1.0.0",
+        "pid": "0x0117",
+        "vid": "0xFABE"
+    },
+    "layouts": {
+        "LAYOUT_split_2x4_2": {
+            "layout": [
+                {"matrix": [0, 16], "x": 0, "y": 0.88},
+                {"matrix": [0, 17], "x": 1, "y": 0.38},
+                {"matrix": [0, 18], "x": 2, "y": 0},
+                {"matrix": [0, 19], "x": 3, "y": 0.38},
+                {"matrix": [0, 0], "x": 4, "y": 0.38},
+                {"matrix": [0, 1], "x": 5, "y": 0},
+                {"matrix": [0, 2], "x": 6, "y": 0.38},
+                {"matrix": [0, 3], "x": 7, "y": 0.88},
+                {"matrix": [0, 12], "x": 0, "y": 1.88},
+                {"matrix": [0, 13], "x": 1, "y": 1.38},
+                {"matrix": [0, 14], "x": 2, "y": 1},
+                {"matrix": [0, 15], "x": 3, "y": 1.38},
+                {"matrix": [0, 4], "x": 4, "y": 1.38},
+                {"matrix": [0, 5], "x": 5, "y": 1},
+                {"matrix": [0, 6], "x": 6, "y": 1.38},
+                {"matrix": [0, 7], "x": 7, "y": 1.88},
+                {"matrix": [0, 11], "x": 2, "y": 2.38},
+                {"matrix": [0, 10], "x": 3, "y": 2.5},
+                {"matrix": [0, 9], "x": 4, "y": 2.5},
+                {"matrix": [0, 8], "x": 5, "y": 2.38}
+            ]
+        }
+    }
+}

keyboards/chouchou/keymaps/default/keymap.c

@@ -0,0 +1,11 @@
+// Copyright 2023 Dane Lipscombe (@dlip)
+// SPDX-License-Identifier: GPL-2.0-or-later
+#include QMK_KEYBOARD_H
+
+const uint16_t PROGMEM keymaps[][MATRIX_ROWS][MATRIX_COLS] = {
+    [0] = LAYOUT_split_2x4_2(
+        KC_A,         KC_B,      KC_C,         KC_D,            KC_N,       KC_M,        KC_L,      KC_K,
+        KC_E,         KC_F,      KC_G,         KC_H,            KC_R,       KC_Q,        KC_P,      KC_O,
+                                 KC_I,         KC_J,            KC_T,       KC_S
+    ),
+};

keyboards/chouchou/readme.md

@@ -0,0 +1,26 @@
+# Chouchou
+
+![Chouchou](https://i.imgur.com/BYk2n5Ch.jpeg)
+
+Chouchou (Japanese for butterfly) is a minimalist unibody keyboard designed to be used with the [Taipo](https://inkeys.wiki/en/keymaps/taipo) layout.
+
+- [Github repo](https://github.com/dlip/chouchou)
+- Keyboard Maintainer: [Dane Lipscombe](https://github.com/dlip)
+
+Make example for this keyboard (after setting up your build environment):
+
+    make chouchou:default
+
+Flashing example for this keyboard:
+
+    make chouchou:default:flash
+
+See the [build environment setup](https://docs.qmk.fm/#/getting_started_build_tools) and the [make instructions](https://docs.qmk.fm/#/getting_started_make_guide) for more information. Brand new to QMK? Start with our [Complete Newbs Guide](https://docs.qmk.fm/#/newbs).
+
+## Bootloader
+
+Enter the bootloader in 3 ways:
+
+* **Bootmagic reset**: Hold down the key at (0,0) in the matrix (usually the top left key or Escape) and plug in the keyboard
+* **Physical reset button**: Briefly press the button on the back of the PCB - some may have pads you must short instead
+* **Keycode in layout**: Press the key mapped to `QK_BOOT` if it is available

keyboards/clueboard/2x1800/2021/keymaps/default/keymap.json

@@ -2,7 +2,7 @@
     "version": 1,
     "author": "skullydazed",
     "notes": "",
-    "keyboard": "clueboard/2x1800/2018",
+    "keyboard": "clueboard/2x1800/2021",
     "keymap": "default",
     "layout": "LAYOUT_all",
     "layers": [

keyboards/coarse/cordillera/config.h

@@ -19,7 +19,6 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #define BACKLIGHT_PWM_DRIVER    PWMD1
 #define BACKLIGHT_PWM_CHANNEL   1
-#define BACKLIGHT_PAL_MODE      1
 
 /* Mechanical locking support. Use KC_LCAP, KC_LNUM or KC_LSCR instead in keymap */
 #define LOCKING_SUPPORT_ENABLE

keyboards/crkbd/keymaps/rpbaptist/config.h

@@ -20,115 +20,103 @@ along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
 #pragma once
 
-//#define USE_MATRIX_I2C
-
 /* Select hand configuration */
 #define EE_HANDS
 
-#ifdef OLED_ENABLE
-#    define OLED_TIMEOUT 600000
-#endif
-
-// #define FORCE_NKRO
+#define NO_ACTION_ONESHOT
+#define NO_USB_STARTUP_CHECK
 
-#define QMK_ESC_OUTPUT F4  // usually COL
-#define QMK_ESC_INPUT D4   // usually ROW
-#define QMK_LED B0
+#define LAYER_STATE_8BIT // 8 layer limit
 
-#define NO_ACTION_ONESHOT
+#define SPLIT_ACTIVITY_ENABLE
+#define SPLIT_LAYER_STATE_ENABLE
 
 #ifdef RGB_MATRIX_ENABLE
-#    define RGB_DISABLE_WHEN_USB_SUSPENDED  // turn off effects when suspended
-#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 150
-
-#    define RGB_MATRIX_HUE_STEP 8
-#    define RGB_MATRIX_SAT_STEP 12
-#    define RGB_MATRIX_VAL_STEP 10
-#    define RGB_MATRIX_SPD_STEP 10
 
+// Undefine r2g effects
 #    undef ENABLE_RGB_MATRIX_ALPHAS_MODS
-#    undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
 #    undef ENABLE_RGB_MATRIX_GRADIENT_UP_DOWN
-#    undef ENABLE_RGB_MATRIX_BREATHING
+#    undef ENABLE_RGB_MATRIX_GRADIENT_LEFT_RIGHT
 #    undef ENABLE_RGB_MATRIX_BAND_SAT
 #    undef ENABLE_RGB_MATRIX_BAND_VAL
-#    undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_SAT
-#    undef ENABLE_RGB_MATRIX_BAND_PINWHEEL_VAL
 #    undef ENABLE_RGB_MATRIX_BAND_SPIRAL_SAT
 #    undef ENABLE_RGB_MATRIX_BAND_SPIRAL_VAL
-
-// #undef ENABLE_RGB_MATRIX_CYCLE_ALL
-// #    undef ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
-#    undef ENABLE_RGB_MATRIX_CYCLE_UP_DOWN
-#    undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN
-#    undef ENABLE_RGB_MATRIX_CYCLE_OUT_IN_DUAL
 #    undef ENABLE_RGB_MATRIX_RAINBOW_MOVING_CHEVRON
-#    undef ENABLE_RGB_MATRIX_CYCLE_PINWHEEL
 #    undef ENABLE_RGB_MATRIX_CYCLE_SPIRAL
-#    undef ENABLE_RGB_MATRIX_DUAL_BEACON
-#    undef ENABLE_RGB_MATRIX_RAINBOW_BEACON
-// #undef ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
 #    undef ENABLE_RGB_MATRIX_RAINDROPS
-#    undef ENABLE_RGB_MATRIX_JELLYBEAN_RAINDROPS
+#    undef ENABLE_RGB_MATRIX_HUE_BREATHING
+#    undef ENABLE_RGB_MATRIX_PIXEL_FRACTAL
+#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE
+#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#    undef ENABLE_RGB_MATRIX_SPLASH
+#    undef ENABLE_RGB_MATRIX_SOLID_SPLASH
 
-#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
-// #undef ENABLE_RGB_MATRIX_TYPING_HEATMAP
-#    undef ENABLE_RGB_MATRIX_DIGITAL_RAIN
+#    define SPLIT_TRANSACTION_IDS_USER USER_CONFIG_SYNC
 
-#    define RGB_MATRIX_KEYPRESSES  // reacts to keypresses
+#    define RGB_MATRIX_LED_PROCESS_LIMIT (RGB_MATRIX_LED_COUNT + 4) / 5 // limits the number of LEDs to process in an animation per task run (increases keyboard responsiveness)
+#    define IDLE_TIMEOUT 60000 * 4
+#    define GAMING_IDLE_TIMEOUT 10000
+#    define RGB_MATRIX_TYPING_ACTIVE RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define RGB_MATRIX_TYPING_PASSIVE RGB_MATRIX_CYCLE_ALL
+#    define RGB_DISABLE_WHEN_USB_SUSPENDED // turn off effects when suspended
+#    define RGB_MATRIX_MAXIMUM_BRIGHTNESS 135
 
-#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
-#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE
-#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_WIDE
-#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTIWIDE
-#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_CROSS
-#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTICROSS
-#    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_NEXUS
-// #    undef ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+#    define RGB_MATRIX_HUE_STEP 6
+#    define RGB_MATRIX_SAT_STEP 8
+#    define RGB_MATRIX_VAL_STEP 10
+#    define RGB_MATRIX_SPD_STEP 10
 
-#    undef ENABLE_RGB_MATRIX_SPLASH
-#    undef ENABLE_RGB_MATRIX_MULTISPLASH
-#    undef ENABLE_RGB_MATRIX_SOLID_SPLASH
-#    undef ENABLE_RGB_MATRIX_SOLID_MULTISPLASH
+#    define ENABLE_RGB_MATRIX_BREATHING
+#    define ENABLE_RGB_MATRIX_CYCLE_ALL
+#    define ENABLE_RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    define ENABLE_RGB_MATRIX_RAINBOW_PINWHEELS
 
-#    define RGB_MATRIX_ANIMATION_SPEED_DEFAULT UINT8_MAX / 2
-#    define RGB_MATRIX_ANIMATION_SPEED_SLOW RGB_MATRIX_ANIMATION_SPEED_DEFAULT / 4
-#    define RGB_MATRIX_ANIMATION_SPEED_SLOWER RGB_MATRIX_ANIMATION_SPEED_SLOW / 3
+#    define RGB_MATRIX_FRAMEBUFFER_EFFECTS
+#    define ENABLE_RGB_MATRIX_TYPING_HEATMAP
+
+#    define RGB_MATRIX_KEYPRESSES // reacts to keypresses
+
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#    define ENABLE_RGB_MATRIX_SOLID_REACTIVE_MULTINEXUS
+
+#    define RGB_MATRIX_ANIMATION_SPEED_FAST UINT8_MAX / 2
+#    define RGB_MATRIX_ANIMATION_SPEED_MEDIUM UINT8_MAX / 4
+#    define RGB_MATRIX_ANIMATION_SPEED_SLOW UINT8_MAX / 8
+#    define RGB_MATRIX_ANIMATION_SPEED_SLOWER UINT8_MAX / 24
+
+#    if defined(THEME_GODSPEED)
+#        define THEME_HSV 132, 255, 125
+#    elif defined(THEME_GODSPEED_ARES)
+#        define THEME_HSV HSV_ORANGE
+#    elif defined(THEME_LASER)
+#        undef RGB_MATRIX_TYPING_ACTIVE
+#        undef RGB_MATRIX_TYPING_PASSIVE
+#        define THEME_HSV HSV_PURPLE
+#        define RGB_MATRIX_TYPING_ACTIVE RGB_MATRIX_SOLID_REACTIVE_SIMPLE
+#        define RGB_MATRIX_TYPING_PASSIVE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    elif defined(THEME_MILKSHAKE)
+#        undef RGB_MATRIX_TYPING_ACTIVE
+#        undef RGB_MATRIX_TYPING_PASSIVE
+#        define THEME_HSV 30, 255, 218
+#        define RGB_MATRIX_TYPING_ACTIVE RGB_MATRIX_TYPING_HEATMAP
+#        define RGB_MATRIX_TYPING_PASSIVE RGB_MATRIX_CYCLE_LEFT_RIGHT
+#    else
+#        define THEME_HSV 123, 255, 125 // default to PULSE
+#    endif
 #endif
 
 #define TAPPING_TERM 140
 #define PERMISSIVE_HOLD
+#define TAPPING_TERM_PER_KEY
 
+#define TAP_CODE_DELAY 10
 #define TAPPING_TOGGLE 2
 
-#ifdef MOUSEKEY_ENABLE
-#    define MOUSEKEY_DELAY 0
-#    define MOUSEKEY_INTERVAL 16
-#    define MOUSEKEY_MAX_SPEED 6
-#    define MOUSEKEY_TIME_TO_MAX 36
-#    define MOUSEKEY_WHEEL_MAX_SPEED 4
-#    define MOUSEKEY_WHEEL_TIME_TO_MAX 100
-#endif
-
-#ifdef THEME_GODSPEED
-#   define OLED_FONT_H "keyboards/crkbd/keymaps/rpbaptist/glcdfont_godspeed.c"
-#   define THEME_HSV 132, 255, 125
-#endif
-
-#ifdef THEME_PULSE
-#   define OLED_FONT_H "keyboards/crkbd/keymaps/rpbaptist/glcdfont_pulse.c"
-#   define THEME_HSV 123, 255, 125
-#endif
-
-#ifdef THEME_LASER
-#   define OLED_FONT_H "keyboards/crkbd/keymaps/rpbaptist/glcdfont_laser.c"
-#   define THEME_HSV HSV_MAGENTA
+#ifdef OLED_ENABLE
+#    define SPLIT_OLED_ENABLE
+#    define OLED_TIMEOUT 60000 * 10
+#    define OLED_FONT_H "glcdfont_multi.c"
 #endif
 
-#define NO_ACTION_ONESHOT
-
 #undef PRODUCT
 #define PRODUCT "Corne Keyboard"
-
-#define LCPC_KEYS KC_LCTL, KC_LSFT, KC_9
-#define RCPC_KEYS KC_RCTL, KC_RSFT, KC_0