-
|
Hi there. I've just finished building a Retropie arcade machine and all works fine apart from the fact that the joystick controls are reversed (i.e. left/right swapped as are up/down) when using Amiberry. The other emulators work fine using the emulation station controller configuration, just not the Amiga. Unfortunately, as the joysticks are built into the cabinet I can't just turn the joystick through 180° 🫤 Any guidance on how to fix this? |
Beta Was this translation helpful? Give feedback.
Replies: 2 comments
-
|
There was a bug in Amiberry that got fixed recently, that is probably causing this. Some controllers report their axes inverted, and even though Amiberry detects and parses that correctly from the config file, it didn't respect that setting when reading the input. |
Beta Was this translation helpful? Give feedback.
-
|
Great. Thanks for the quick response.
Much appreciated.
…On Tue, 22 Nov 2022, 20:42 Dimitris Panokostas, ***@***.***> wrote:
There was a bug in Amiberry that got fixed recently, that is probably
causing this. Some controllers report their axes inverted, and even though
Amiberry detects and parses that correctly from the config file, it didn't
respect that setting when reading the input.
This is already fixed in master and will be released as part of v5.5,
coming soon.
—
Reply to this email directly, view it on GitHub
<#1032 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/A4KY33VIC6VSV464XOKG3ILWJUV4RANCNFSM6AAAAAASIHDYDE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Beta Was this translation helpful? Give feedback.
There was a bug in Amiberry that got fixed recently, that is probably causing this. Some controllers report their axes inverted, and even though Amiberry detects and parses that correctly from the config file, it didn't respect that setting when reading the input.
This is already fixed in
masterand will be released as part of v5.5, coming soon.