-
Notifications
You must be signed in to change notification settings - Fork 41
Bluetooth Win7 Tutorial
This tutorial is how to add the ArcBotics serial bluetooth module to a Windows 7 computer.
Now on the computer, go to the start menu, and then click on Devices and Printers:
From the new window that opens, click "Add a Device":
If you have a bluetooth receiver installed on your computer, and the bluetooth module is on and flashing, you should see the device pop up now. Depending on how long your computer has seen the device, and had to talk to it, you will see one of these devices:
When it first sees it:
After it starts to identify it (these characters will be in a similar pattern, but different for your device):
And finally it will recognize its broadcasting name 'ArcBotics':
Once you see the device, select it and click next. You will then see this page:
Select 'Enter the device's pairing code' and then click next, you will then see a screen to enter the pin number, enter '0000':
Click next once you've entered the pairing code. Windows will then install the devices for the module. Windows should automatically find and install these drivers for you:
Then you will see the device installed screen:
Success! Your module is now installed. If you're using it with a Servotor32 board, you can now unplug the USB cable and use it wireless. It is advised that you use a second battery back plugged into the logic port if you are using a heavy load (like running a Hexy). Otherwise, you can experience voltage dips as explained here that will reset the board and the bluetooth connection.
If you want to find out what COM port the device is now on (useful for connecting to it with a terminal), then you can go back to the Devices and Printers window:
Right-click on the device, then select "Properties":
http://farm9.staticflickr.com/8196/8365850137_13f4fc2ec6_z.jpg
You should now be able to see the com port under the "Services" menu. In this case, the port is COM6: