Changes from Release 1.2 - Mechanical:

New XY Gantry Design Using the following:

12mm XY Belts.
MGN12c Rails in the stationary position.
MGN12c Rails in the XY cross with 1515 backers.
the rails have now rotated for maximum stiffness.
the Part-Cooling has been optimized for minimal losses, been brought closer to the nozzle and is now 30% more effective according to real world and FEA testing.
the Tool-head has been completely redesigned from the ground up, stiffness has been increased by over 250% at the nozzle, this results in much improved layer stacking
the standard Hotend has moved to a Mosquito style - high flow rate variant for servicing/packaging reasons
the standard extruder has moved to Sherpa Mini, from Bondtech BMG, Ascender support will come with future revisions

Notes:

Currently not all of the STLs are in the STLs folder to print an entire machine, the sourcing guide is incomplete (specifically the hardware count), and the generic configurations are not updated. Please use discord for support.
M3 heatset inserts have been sized to use the Chinese variants across the entire machine (4.8mm holes), as this was a popular request.