release 3.0 beta1 prep

README.md

@@ -1,5 +1,8 @@
-# Chhogori (K2) Printer - Release 2.2
+# Chhogori (K2) Printer
 
+## The Current Release is: Release 3 - Beta 1
+
+## Info:
 Chhogori (K2): is a Medium Format, Direct Drive, Fully Enclosed FDM Printer.
 
 This is an entirely scratch design, based on the efforts of the "Hypercube Overkill Project" for the XY Motion System, and inspired by all other prior repraps.
@@ -12,9 +15,9 @@ BOM/Sourcing Guide for a 250x250x250 Build can be found here: https://docs.googl
 
 Frame Calculator: https://docs.google.com/spreadsheets/d/1hEwPB6xaeSEoHs37LAolL1LlHkrrIWt3NFW9NkrmP7g/edit?usp=sharing
 
-# Stats:
+## Stats:
 - Fully Enclosed Design
-- 2020, 2040, and 2060 Frame Members
+- 2020 and 2040 Frame Members
 - Insulated Build Chamber (Not Heated)
 - Build Volumes of ~250^3 to 500^3 (use of whole plate available) + additional area to purge and wipe
      - Z can theoretically be 1m tall, just not fully supported or tested
@@ -24,32 +27,20 @@ Frame Calculator: https://docs.google.com/spreadsheets/d/1hEwPB6xaeSEoHs37LAolL1
 - Shortest Belt Paths Possible, 4 Motors, 2 Per X, 2 Per Y Axis
 - Moving Bed, Fixed Gantry
 
-- MGN12C Rails for XYZ Stationary Rails
-- MGN12C Rails with 1515 Backers for XY Cross (Moving Members)
+- MGN12H Rails for XY Stationary Rails
+- MGN15H Rails for XY Cross (Moving Members)
+- MGN15H Rails for Z - will be provided in a future update
+- Laser cut metal parts throughout for stiffness and strength (steel recommended in most places, aluminum on moving components)
 - 12mm 2GT Belts on XY Motion 
-- 12mm 2GT Belts with 20 or 40:1 Worm Drive on Z to lift the Bed 
+- 12mm 2GT Belts with 20:1 Worm Drive on Z to lift the Bed 
 	 - Hybrid Laser Cut Metal and Printed Part Construction
 	 - Legacy Support for 15mm 3HTD belts also offered
 - Heavy Duty Bearings
 - NEMA17 Motors XYZ
 
-- Minimal Printed Parts (ABS or ASA Required, PC Recommended for motion components)
+- Minimal Printed Parts (ASA Required, PC Recommended for motion components)
 
 - Fysetc Spider or S6 Controller + BTT Expander Board with Klipper Required
 - Mosquito Style, Dragon Style, Mosquito Magnum+, Nitram's VolcoMosquito, and many other hotends supported
 - 24V Power Standard, 48V Optional and Preferred
-- Mains Bed
-
-![Image of Front View](Release_2_2/Images/1800px_k2_r2_render_center.png?raw=true)
-
-![Image of ISO View](Release_2_2/Images/1800px_k2_r2_render_dimetric.png?raw=true)
-
-![Image of Annex Logo](Release_2_2/Images/1800px_k2_r2_render_logozoom.png?raw=true)
-
-![Image of Bed Underside](Release_2_2/Images/1800px_k2_r2_render_lowertext.png?raw=true)
-
-![Image of ISO Rear](Release_2_2/Images/1800px_k2_r2_render_rear.png?raw=true)
-
-![Image of Toolhead 1](Release_2_2/Images/1800px_k2_r2_render_toolhead_lower.png?raw=true)
-
-![Image of Toolhead 2](Release_2_2/Images/1800px_k2_r2_render_toolhead_upper.png?raw=true)
+- Mains Bed