Skip to content

Commit

Permalink
[BT] - Bump decoder to v1.6.2 (#1797)
Browse files Browse the repository at this point in the history 
* [BT] Bump decoder to v1.6.2

* Replace separators / by commas for consistency with Theengs
  • Loading branch information
@1technophile
1technophile authored Nov 12, 2023
1 parent aca0850 commit 5a36034
Show file tree
Hide file tree
Showing 2 changed files with 92 additions and 81 deletions.
171 changes: 91 additions & 80 deletions docs/prerequisites/devices.md
View file
Original file line number Diff line number Diff line change
Expand Up @@ -18,91 +18,102 @@ Added to that it retrieves the measures from the devices below. By default the d

|Devices|Model|Measurements|
|-|:-:|:-:|
| Amazfit|Smart Watch/Band|steps, activity heart rate (when activated in the Zepp Life settings)|
| April Brother|ABTemp|uuid/mfid/major/txpower @ 1 m/temperature/battery|
| April Brother|N03|temperature/humidity/luminance/battery|
| ATorch Battery Capacity Monitor (c)|DT24|voltage/amp/watt|
| Amazfit|Smart Watch, Band|steps, activity heart rate (when activated in the Zepp Life settings)|
| April Brother|ABTemp|uuid, mfid, major, txpower @ 1 m, temperature, battery|
| April Brother|N03|temperature, humidity, luminance, battery|
| April Brother|N07|temperature, humidity, battery, packet ID|
| ATorch Battery Capacity Monitor (c)|DT24|voltage, amp, watt|
| BLE watches with fixed MAC||rssi for presence detection|
| BLE beacons keychains||rssi for presence detection|
| BlueCharm|BC08|acceleration x/y/z-axis/voltage/temperature|
| BlueCharm|BC04P|acceleration x/y/z-axis/voltage/temperature|
| BlueCharm|BC021|acceleration x/y/z-axis/voltage/temperature|
| BlueMaestro|TempoDisc 1 in 1|temperature/battery|
| BlueMaestro|TempoDisc 3 in 1|temperature/humidity/dew point/battery|
| BlueMaestro|TempoDisc 4 in 1|temperature/humidity/pressure/battery|
| BM2 Battery Monitor|BM2|battery/volt(c)|
| ClearGrass|CGG1|temperature/humidity/battery/voltage (depending on which CGG1 firmware is installed)|
| ClearGrass alarm clock|CGD1|temperature/humidity/battery|
| ClearGrass alarm clock|CGC1|temperature/humidity/battery|
| ClearGrass with atmospheric pressure|CGP1W|temperature/humidity/air pressure|
| ClearGrass Clock|LYWSD02|temperature/humidity/battery|
| GOVEE|H5055|temperature1/temperature2/temperature3/temperature4/temperature5/temperature6/battery|
| GOVEE|H5074|temperature/humidity/battery|
| GOVEE|H5075|temperature/humidity/battery|
| GOVEE|H5072|temperature/humidity/battery|
| GOVEE|H5101|temperature/humidity/battery|
| GOVEE|H5102|temperature/humidity/battery|
| GOVEE|H5106|PM2.5/temperature/humidity/battery|
| GOVEE|H5174|temperature/humidity/battery|
| GOVEE|H5177|temperature/humidity/battery|
| HONEYWELL|JQJCY01YM|formaldehyde/temperature/humidity/battery|
| Hydractiva Digital | Amphiro/Oras|sessions/time/litres/temperature/energy|
| iBeacon|protocol|uuid/mfid/major/minor/txpower @ 1 m/voltage|
| Jaalee|JHT F525|temperature/humidity/battery|
| INKBIRD|IBS-TH1|temperature/humidity/battery|
| INKBIRD|IBS-TH2/P01B|temperature/battery|
| INKBIRD|IBT-2X|temperature1/temperature2|
| INKBIRD|IBT-4X(S/C)|temperature1/temperature2/temperature3/temperature4|
| INKBIRD|IBT-6XS|temperature1/temperature2/temperature3/temperature4/temperature5/temperature6|
| iNode|Energy Meter|Current average and aggregate kW(h)/m³/battery|
| KKM |K6P|temperature/humidity/voltage|
| KKM |K9|temperature/humidity/voltage/acceleration x/y/z-axis (optional - without recognised as K6P)|
| Oria/Brifit/SigmaWit/SensorPro|TH Sensor T201|temperature/humidity/battery|
| Oria/Brifit/SigmaWit/SensorPro|TH Sensor T301|temperature/humidity/battery|
| Mokosmart|M1|acceleration x/y/z-axis/battery|
| Mokosmart|H4|temperature/humidity/voltage|
| Mopeka|Pro|temperature/level/sync status/voltage/battery/reading quality/acceleration x/y-axis|
| Otio/BeeWi|Door & Window Sensor|contact/battery|
| BlueCharm|BC08|acceleration x, y, z-axis, voltage, temperature|
| BlueCharm|BC04P|acceleration x, y, z-axis, voltage, temperature|
| BlueCharm|BC021|acceleration x, y, z-axis, voltage, temperature|
| BlueMaestro|TempoDisc 1 in 1|temperature, battery|
| BlueMaestro|TempoDisc 3 in 1|temperature, humidity, dew point, battery|
| BlueMaestro|TempoDisc 4 in 1|temperature, humidity, pressure, battery|
| BM2 Battery Monitor|BM2|battery, volt(c)|
| BM6 Battery Monitor|BM6|battery|
| ClearGrass|CGG1|temperature, humidity, battery, voltage (depending on which CGG1 firmware is installed)|
| ClearGrass alarm clock|CGD1|temperature, humidity, battery|
| ClearGrass alarm clock|CGC1|temperature, humidity, battery|
| ClearGrass with atmospheric pressure|CGP1W|temperature, humidity, air pressure|
| ClearGrass Clock|LYWSD02|temperature, humidity, battery|
| GOVEE|H5055|temperature1, temperature2, temperature3, temperature4, temperature5, temperature6, battery|
| GOVEE|H5074|temperature, humidity, battery|
| GOVEE|H5075|temperature, humidity, battery|
| GOVEE|H5072|temperature, humidity, battery|
| GOVEE|H5100|temperature, humidity, battery|
| GOVEE|H5101|temperature, humidity, battery|
| GOVEE|H5102|temperature, humidity, battery|
| GOVEE|H5104|temperature, humidity, battery|
| GOVEE|H5106|PM2.5, temperature, humidity, battery|
| GOVEE|H5174|temperature, humidity, battery|
| GOVEE|H5177|temperature, humidity, battery|
| GOVEE|H5179|temperature, humidity, battery|
| HONEYWELL|JQJCY01YM|formaldehyde, temperature, humidity, battery|
| Hydractiva Digital | Amphiro, Oras|sessions, time, litres, temperature, energy|
| iBeacon|protocol|uuid, mfid, major, minor, txpower @ 1 m, voltage|
| Jaalee|JHT F525|temperature, humidity, battery|
| INKBIRD|IBS-TH1|temperature, humidity, battery|
| INKBIRD|IBS-TH12S|temperature, humidity, battery|
| INKBIRD|IBS-TH2, P01B|temperature, battery|
| INKBIRD|IBT-2X|temperature1, temperature2|
| INKBIRD|IBT-4X(S, C)|temperature1, temperature2, temperature3, temperature4|
| INKBIRD|IBT-6XS|temperature1, temperature2, temperature3, temperature4, temperature5, temperature6|
| iNode|Energy Meter|Current average and aggregate kW(h), m³, battery|
| KKM |K6P|temperature, humidity, voltage|
| KKM |K9|temperature, humidity, voltage, acceleration x, y, z-axis (optional - without recognised as K6P)|
| Oral B| Toothbrush| state, mode, sector, pressure, time|
| Oria, Brifit, SigmaWit, SensorPro|TH Sensor T201|temperature, humidity, battery|
| Oria, Brifit, SigmaWit, SensorPro|TH Sensor T301|temperature, humidity, battery|
| Mokosmart|M1|acceleration x, y, z-axis, battery|
| Mokosmart|H4|temperature, humidity, voltage|
| Mopeka|Pro|temperature, level, sync status, voltage, battery, reading quality, acceleration x, y-axis|
| Lippert|BottleCheck|temperature, level, sync status, voltage, battery, reading quality, acceleration x, y-axis|
| Otio, BeeWi|Door & Window Sensor|contact, battery|
| Polar|H10 Chest strap|activity heart rate|
| Qingping|CGDK2|temperature/humidity|
| Qingping|CGDK2|temperature, humidity|
| Qingping|CGH1|open|
| Qingping|CGPR1|presence/luminance/battery|
| Qingping|CGDN1|temperature/humidity/PM2.5/PM10/carbon dioxide|
| RDL52832||mfid/uuid/minor/major/txpower @ 1 m/temperature/humidity/acceleration x/y/z-axis|
| RBaron|b-parasite|moisture/temperature/humidity/luminance (v1.1.0+)/voltage|
| RuuviTag Raw V1|RuuviTag|temperature/humidity/pressure/acceleration x/y/z-axis/voltage|
| RuuviTag Raw V2|RuuviTag|temperature/humidity/pressure/acceleration x/y/z-axis/voltage/TX power/movement/counter/sequence number|
| SmartDry|Laundry Sensor|temperature/humidity/shake/voltage/wake|
| Sensirion|MyCO₂/CO₂ Gadget|temperature/humidity/carbon dioxide|
| Sensirion|SHT4X TH sensor|temperature/humidity|
| Shelly|Button1|button press type, battery, packet ID|
| Switchbot|Bot (c)|mode/state/battery|
| Switchbot|Motion Sensor|movement/light level/sensing distance/led/scope tested/battery|
| Switchbot|Contact Sensor|contact/movement/scope tested/light level/in count/out count/push count/battery|
| Switchbot|Curtain|motion state/position/light level/battery/calibration state|
| Switchbot|Meter (Plus)|temperature/humidity/battery|
| Switchbot|Outdoor Meter|temperature/humidity/battery|
| Thermobeacon|WS02|temperature/humidity/voltage/timestamp/maximum temperature/maximum temperature timestamp/minimum temperature/minimum temperature timestamp|
| Thermobeacon|WS08|temperature/humidity/voltage/timestamp/maximum temperature/maximum temperature timestamp/minimum temperature/minimum temperature timestamp|
| ThermoPro|TP357|temperature/humidity|
| ThermoPro|TP358|temperature/humidity|
| ThermoPro|TP359|temperature/humidity|
| ThermoPro|TP393|temperature/humidity|
| TPMS|TPMS|temperature/pressure/battery/alarm/count|
| Vegtrug||temperature/moisture/luminance/fertility|
| XIAOMI Mi Flora|HHCCJCY01HHCC|temperature/moisture/luminance/fertility/battery(c) firmware >3.1.8|
| XIAOMI Ropot|HHCCPOT002|temperature/moisture/fertility|
| XIAOMI Mi Jia|LYWSDCGO|temperature/humidity/battery|
| XIAOMI Mi Jia|LYWSD02|temperature/humidity/battery|
| XIAOMI Mi Jia 2(c)|LYWSD03MMC|temperature/humidity/battery/voltage|
| XIAOMI Mi Jia 2 custom firmware (2)|LYWSD03MMC ATC|temperature/humidity/battery/voltage|
| XIAOMI Mi Jia 2 custom firmware (3)|LYWSD03MMC PVVX|temperature/humidity/battery/voltage|
| Qingping|CGPR1|presence, luminance, battery|
| Qingping|CGDN1|temperature, humidity, PM2.5, PM10, carbon dioxide|
| RDL52832||mfid, uuid, minor, major, txpower @ 1 m, temperature, humidity, acceleration x, y, z-axis|
| RBaron|b-parasite|moisture, temperature, humidity, luminance (v1.1.0+), voltage|
| RuuviTag Raw V1|RuuviTag|temperature, humidity, pressure, acceleration x, y, z-axis, voltage|
| RuuviTag Raw V2|RuuviTag|temperature, humidity, pressure, acceleration x, y, z-axis, voltage, TX power, movement, counter, sequence number|
| SmartDry|Laundry Sensor|temperature, humidity, shake, voltage, wake|
| Sensirion|MyCO₂, CO₂ Gadget|temperature, humidity, carbon dioxide|
| Sensirion|SHT4X TH sensor|temperature, humidity|
| ShellyBlu|Button1|button press type, battery, packet ID|
| ShellyBlu|Door, Window|contact, rotation, battery, packet ID|
| ShellyBlu|Motion|motion, illuminance, battery, packet ID|
| Switchbot|Bot (c)|mode, state, battery|
| Switchbot|Motion Sensor|movement, light level, sensing distance, led, scope tested, battery|
| Switchbot|Contact Sensor|contact, movement, scope tested, light level, in count, out count, push count, battery|
| Switchbot|Curtain|motion state, position, light level, battery, calibration state|
| Switchbot|Meter (Plus)|temperature, humidity, battery|
| Switchbot|Outdoor Meter|temperature, humidity, battery|
| Thermobeacon|WS02|temperature, humidity, voltage, timestamp, maximum temperature, maximum temperature timestamp, minimum temperature, minimum temperature timestamp|
| Thermobeacon|WS08|temperature, humidity, voltage, timestamp, maximum temperature, maximum temperature timestamp, minimum temperature, minimum temperature timestamp|
| ThermoPro|TP357|temperature, humidity|
| ThermoPro|TP357s|temperature, humidity|
| ThermoPro|TP358|temperature, humidity|
| ThermoPro|TP359|temperature, humidity|
| ThermoPro|TP393|temperature, humidity|
| TPMS|TPMS|temperature, pressure, battery, alarm, count|
| Vegtrug||temperature, moisture, luminance, fertility|
| XIAOMI Mi Flora|HHCCJCY01HHCC|temperature, moisture, luminance, fertility, battery(c) firmware >3.1.8|
| XIAOMI Ropot|HHCCPOT002|temperature, moisture, fertility|
| XIAOMI Mi Jia|LYWSDCGO|temperature, humidity, battery|
| XIAOMI Mi Jia|LYWSD02|temperature, humidity, battery|
| XIAOMI Mi Jia 2(c)|LYWSD03MMC|temperature, humidity, battery, voltage|
| XIAOMI Mi Jia 2 custom firmware (2)|LYWSD03MMC ATC|temperature, humidity, battery, voltage|
| XIAOMI Mi Jia 2 custom firmware (3)|LYWSD03MMC PVVX (encrypted or not)|temperature, humidity, battery, voltage|
| XIAOMI Mi Lamp|MUE4094RT|presence|
| XIAOMI Mi Smart Scale|XMTZC01HM/XMTZC04HM|weighing mode/unit/weight|
| XIAOMI Mi Body Composition Scale|XMTZC02HM/XMTZC05HM|weighing mode/unit/weight/impedance|
| XIAOMI Mi Temp/Humidity v1(c)|MHO-C401|temperature/humidity/battery/voltage|
| XIAOMI Mi Temp/Humidity v2(c)|XMWSDJ04MMC|temperature/humidity/battery/voltage|
| XIAOMI|Mi band|steps/activity heart rate (when activated in the Zepp Life settings)|
| XIAOMI Mi Smart Scale|XMTZC01HM, XMTZC04HM|weighing mode, unit, weight|
| XIAOMI Mi Body Composition Scale|XMTZC02HM, XMTZC05HM|weighing mode, unit, weight, impedance|
| XIAOMI Mi Temp, Humidity v1(c)|MHO-C401|temperature, humidity, battery, voltage|
| XIAOMI Mi Temp, Humidity v2(c)|XMWSDJ04MMC|temperature, humidity, battery, voltage|
| XIAOMI|Mi band|steps, activity heart rate (when activated in the Zepp Life settings)|

Exhaustive list [here](https://compatible.openmqttgateway.com/index.php/devices/ble-devices/)

Expand Down
2 changes: 1 addition & 1 deletion platformio.ini
View file
Original file line number Diff line number Diff line change
Expand Up @@ -151,7 +151,7 @@ [email protected]
rtl_433_ESP = https://github.com/NorthernMan54/rtl_433_ESP.git#v0.3.0
emodbus = miq19/[email protected]
gfSunInverter = https://github.com/BlackSmith/GFSunInverter.git#v1.0.1
decoder = https://github.com/theengs/decoder.git
decoder = https://github.com/theengs/decoder.git#v1.6.2
ssd1306 = https://github.com/ThingPulse/esp8266-oled-ssd1306.git#f96fd6a
lm75 = jeremycole/I2C Temperature Sensors derived from the LM75@^1.0.3
rn8209 = https://github.com/theengs/RN8209C-SDK.git#arduino
Expand Down

0 comments on commit 5a36034

Please sign in to comment.