aotec gen5 controller

[Nifrabar]

Hi!
Any idea if there are known problems with aotec gen5 stick on raspberry pi 3+?
I am facing pfoblems to start docker with this stick.
I updated the yaml file with the result of the linux comment ls /dev/serial/by-id but docker fails. (/dev/serial/by-id/usb-0658_0200-if00)

docker-compose up ends with next error:
Error response from daemon: error gathering device information while adding custom device "/dev/serial/by-id/usb-0658_0200-if00-port0": no such file or directory
Any idea what goes wrong?

Bart

[robertsLando]

This /dev/serial/by-id/usb-0658_0200-if00 is different from /dev/serial/by-id/usb-0658_0200-if00-port0 (notice the -port0 suffix. You may just have a typo issue

[alkempter]

Hi,
From my knowledge, this device only has an issue with PI4, not with PI3b
my devices statement e.g. looks like:
networks:
- zwave
devices:
- '/dev/serial/by-id/usb-0658_0200-if00:/dev/zwave'

Best regards.

[Nifrabar]

@ alkempter
Agreed. but to make it working I needed to change inside zwavejs /dev/zwave with an other location. Of course that did not work. But after reverting to /dev/zwave it all worked like a charm.
-Bart