diff --git a/changelog.md b/changelog.md
index f096b7a3d3f9..6cd24ca4ae86 100644
--- a/changelog.md
+++ b/changelog.md
@@ -28,3 +28,4 @@
 05-29-2019 - Fixing matrix_scan so it properly returns changed status  
 05-29-2019 - Add belgian layour for sendstring (qmk#6008)  
 06-03-2019 - Overhaul of AutoShift feature (qmk#6067)  
+06-05-2019 - Parameterize STM32 I2C pin modes and timing parameters. (qmk#5671)
diff --git a/drivers/arm/i2c_master.c b/drivers/arm/i2c_master.c
index 7369398cc4b9..5814375f371f 100644
--- a/drivers/arm/i2c_master.c
+++ b/drivers/arm/i2c_master.c
@@ -32,12 +32,10 @@
 
 static uint8_t i2c_address;
 
-// This configures the I2C clock to 400khz assuming a 72Mhz clock
-// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
 static const I2CConfig i2cconfig = {
-  STM32_TIMINGR_PRESC(15U) |
-  STM32_TIMINGR_SCLDEL(4U) | STM32_TIMINGR_SDADEL(2U) |
-  STM32_TIMINGR_SCLH(15U)  | STM32_TIMINGR_SCLL(21U),
+  STM32_TIMINGR_PRESC(I2C1_TIMINGR_PRESC) |
+  STM32_TIMINGR_SCLDEL(I2C1_TIMINGR_SCLDEL) | STM32_TIMINGR_SDADEL(I2C1_TIMINGR_SDADEL) |
+  STM32_TIMINGR_SCLH(I2C1_TIMINGR_SCLH)  | STM32_TIMINGR_SCLL(I2C1_TIMINGR_SCLL),
   0,
   0
 };
@@ -58,13 +56,13 @@ __attribute__ ((weak))
 void i2c_init(void)
 {
   // Try releasing special pins for a short time
-  palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_INPUT);
-  palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_INPUT);
+  palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_INPUT);
+  palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_INPUT);
 
   chThdSleepMilliseconds(10);
 
-  palSetPadMode(I2C1_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
-  palSetPadMode(I2C1_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(4) | PAL_STM32_OTYPE_OPENDRAIN);
+  palSetPadMode(I2C1_SCL_BANK, I2C1_SCL, PAL_MODE_ALTERNATE(I2C1_SCL_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
+  palSetPadMode(I2C1_SDA_BANK, I2C1_SDA, PAL_MODE_ALTERNATE(I2C1_SDA_PAL_MODE) | PAL_STM32_OTYPE_OPENDRAIN);
 
   //i2cInit(); //This is invoked by halInit() so no need to redo it.
 }
diff --git a/drivers/arm/i2c_master.h b/drivers/arm/i2c_master.h
index a15f1702dd30..1bb74c800f6c 100644
--- a/drivers/arm/i2c_master.h
+++ b/drivers/arm/i2c_master.h
@@ -26,9 +26,19 @@
 #include "ch.h"
 #include <hal.h>
 
-#ifndef I2C1_BANK
-    #define I2C1_BANK GPIOB
+#ifdef I2C1_BANK
+    #define I2C1_SCL_BANK I2C1_BANK
+    #define I2C1_SDA_BANK I2C1_BANK
 #endif
+
+#ifndef I2C1_SCL_BANK
+    #define I2C1_SCL_BANK GPIOB
+#endif
+
+#ifndef I2C1_SDA_BANK
+    #define I2C1_SDA_BANK GPIOB
+#endif
+
 #ifndef I2C1_SCL
     #define I2C1_SCL 6
 #endif
@@ -36,6 +46,32 @@
     #define I2C1_SDA 7
 #endif
 
+// The default PAL alternate modes are used to signal that the pins are used for I2C
+#ifndef I2C1_SCL_PAL_MODE
+    #define I2C1_SCL_PAL_MODE 4
+#endif
+#ifndef I2C1_SDA_PAL_MODE
+    #define I2C1_SDA_PAL_MODE 4
+#endif
+
+// The default timing values below configures the I2C clock to 400khz assuming a 72Mhz clock
+// For more info : https://www.st.com/en/embedded-software/stsw-stm32126.html
+#ifndef I2C1_TIMINGR_PRESC
+    #define I2C1_TIMINGR_PRESC 15U
+#endif
+#ifndef I2C1_TIMINGR_SCLDEL
+    #define I2C1_TIMINGR_SCLDEL 4U
+#endif
+#ifndef I2C1_TIMINGR_SDADEL
+    #define I2C1_TIMINGR_SDADEL 2U
+#endif
+#ifndef I2C1_TIMINGR_SCLH
+    #define I2C1_TIMINGR_SCLH 15U
+#endif
+#ifndef I2C1_TIMINGR_SCLL
+    #define I2C1_TIMINGR_SCLL 21U
+#endif
+
 #ifndef I2C_DRIVER
   #define I2C_DRIVER I2CD1
 #endif