diff --git a/buildroot/tests/mks_robin-tests b/buildroot/tests/mks_robin-tests
index 652147f86707..38d047eeb674 100755
--- a/buildroot/tests/mks_robin-tests
+++ b/buildroot/tests/mks_robin-tests
@@ -18,5 +18,13 @@ opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
 opt_enable TFT_LVGL_UI TFT_RES_480x320
 exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" "$3"
 
+#
+# MKS Robin LVGL FSMC
+#
+use_example_configs Mks/Robin
+opt_disable TFT_CLASSIC_UI TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240
+opt_enable TFT_LVGL_UI TFT_RES_480x320
+exec_test $1 $2 "MKS Robin nano v1.2 LVGL FSMC" "$3"
+
 # cleanup
 restore_configs
diff --git a/buildroot/tests/rambo-tests b/buildroot/tests/rambo-tests
index d471f4201c80..b8005778eeb9 100755
--- a/buildroot/tests/rambo-tests
+++ b/buildroot/tests/rambo-tests
@@ -129,5 +129,51 @@ opt_set XY_FREQUENCY_LIMIT 15
 opt_add FILWIDTH_PIN 5
 exec_test $1 $2 "Rambo | CoreXY, Gradient Mix | Endstop Int. | Home Y > X | FW Retract ..." "$3"
 
+#
+# Test MINIRAMBO with PWM_MOTOR_CURRENT and many features
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_MINIRAMBO
+opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER \
+          SDSUPPORT PCA9632 SOUND_MENU_ITEM GCODE_REPEAT_MARKERS \
+          AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY LCD_BED_LEVELING G26_MESH_VALIDATION MESH_EDIT_MENU \
+          LIN_ADVANCE EXTRA_LIN_ADVANCE_K \
+          INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT EXPERIMENTAL_I2CBUS M100_FREE_MEMORY_WATCHER \
+          NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE \
+          ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES \
+          PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 M114_DETAIL
+opt_set CONTROLLERFAN_SPEED_IDLE 128
+opt_add M100_FREE_MEMORY_DUMPER
+opt_add M100_FREE_MEMORY_CORRUPTOR
+opt_set PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }"
+opt_set I2C_SLAVE_ADDRESS 63
+exec_test $1 $2 "MINIRAMBO | RRDGFSC | M100 | PWM_MOTOR_CURRENT | PRINTCOUNTER | Advanced Pause ..." "$3"
+
+#
+# Test many less common options
+#
+restore_configs
+opt_set MOTHERBOARD BOARD_RAMBO
+opt_set TEMP_SENSOR_0 -2
+opt_set DIGIPOT_I2C_NUM_CHANNELS 5
+opt_set LCD_LANGUAGE it
+opt_set MIXING_STEPPERS 2
+opt_set SERVO_DELAY "{ 300, 300, 300 }"
+opt_enable COREYX USE_XMAX_PLUG MIXING_EXTRUDER GRADIENT_MIX \
+           BABYSTEPPING BABYSTEP_DISPLAY_TOTAL FILAMENT_LCD_DISPLAY \
+           REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER MENU_ADDAUTOSTART SDSUPPORT SDCARD_SORT_ALPHA \
+           ENDSTOP_NOISE_THRESHOLD FAN_SOFT_PWM \
+           FIX_MOUNTED_PROBE AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE FILAMENT_WIDTH_SENSOR PROBE_OFFSET_WIZARD \
+           Z_SAFE_HOMING SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
+           SD_ABORT_ON_ENDSTOP_HIT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT ADVANCED_OK M114_DETAIL \
+           VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS EXTRA_FAN_SPEED FWRETRACT \
+           USE_CONTROLLER_FAN CONTROLLER_FAN_EDITABLE CONTROLLER_FAN_USE_Z_ONLY
+opt_set CONTROLLER_FAN_PIN X_MAX_PIN
+opt_set FAN_MIN_PWM 50
+opt_set FAN_KICKSTART_TIME 100
+opt_set XY_FREQUENCY_LIMIT 15
+opt_add FILWIDTH_PIN 5
+exec_test $1 $2 "Rambo | CoreXY, Gradient Mix | Endstop Int. | Home Y > X | FW Retract ..." "$3"
+
 # clean up
 restore_configs