We read every piece of feedback, and take your input very seriously.
To see all available qualifiers, see our documentation.
Have a question about this project? Sign up for a free GitHub account to open an issue and contact its maintainers and the community.
By clicking “Sign up for GitHub”, you agree to our terms of service and privacy statement. We’ll occasionally send you account related emails.
Already on GitHub? Sign in to your account
https://web.stanford.edu/class/cs140e/assignments/0-blinky/
1 Raspberry Pi 3
1 1⁄2-sized breadboard
1 4GiB microSD card
1 microSD card USB adapter
1 CP2102 USB TTL adapter w/4 jumper cables:
10 multicolored LEDs
4 100 ohm resistors
4 1k ohm resistors
10 male-male DuPont jumper cables
10 female-male DuPont jumper cables
[https://www.amazon.com/gp/product/B0778CZ97B/ref=ox_sc_act_title_5?smid=A30ZYR2W3VAJ0A&psc=1]
The text was updated successfully, but these errors were encountered:
No branches or pull requests
Intro
https://web.stanford.edu/class/cs140e/assignments/0-blinky/
Devices
1 Raspberry Pi 3
1 1⁄2-sized breadboard
1 4GiB microSD card
1 microSD card USB adapter
1 CP2102 USB TTL adapter w/4 jumper cables:
10 multicolored LEDs
4 100 ohm resistors
4 1k ohm resistors
10 male-male DuPont jumper cables
10 female-male DuPont jumper cables
Buy
[https://www.amazon.com/gp/product/B0778CZ97B/ref=ox_sc_act_title_5?smid=A30ZYR2W3VAJ0A&psc=1]
The text was updated successfully, but these errors were encountered: