From 12e7295307108175b1adc77bca00ead9616cfd28 Mon Sep 17 00:00:00 2001 From: Maksim Masalski Date: Fri, 17 Jan 2020 15:16:38 +0800 Subject: [PATCH] docs: error in mec15xxevb assy6853 in set up manual Error in that manual. Header JP39 should have connected jumpers 1-2, 3-4. In docs I wrote that is to make sure JP39 does not have any jumper. Signed-off-by: Maksim Masalski --- boards/arm/mec15xxevb_assy6853/doc/index.rst | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/boards/arm/mec15xxevb_assy6853/doc/index.rst b/boards/arm/mec15xxevb_assy6853/doc/index.rst index 6f7fb5ef9e4260..f3b29f8048c9c6 100644 --- a/boards/arm/mec15xxevb_assy6853/doc/index.rst +++ b/boards/arm/mec15xxevb_assy6853/doc/index.rst @@ -183,7 +183,7 @@ PVT SPI, SHD SPI and LED0-2 respectively. | | | | 17-18 | 20-21 | | +----------+----------+--------+-----------+----------+---------+ -.. note:: An additional setting for UART2 is to make sure JP39 does not have any jumper. +.. note:: For UART2 make sure JP39 have jumpers connected 1-2, 3-4. To receive UART2 serial output, please refer to the picture below to make sure that JP9 configured for UART2 output.