This project aims to provide a ready-to-go container with all of the needed dependencies to install and run DaVinci Resolve on Linux, based on information compiled by bluesabre in his GitHub Gist. Davincibox is primarily intended for users of image-based systems such as Fedora Atomic Desktops and Universal Blue images, but it can be used on any Linux distro that distrobox is available on.
My own testing for davincibox has exclusively been with an AMD RX 6600XT GPU. However, other users have contributed test results here: #21
Davincibox has had limited testing with DaVinci Resolve Studio. Use at your own risk. See #26
DaVinci Resolve on Linux, especially the free version, has limited codec support. Unless you can show that certain codecs are available when using DaVinci Resolve outside of davincibox, but not when using davincibox, do not report issues about missing codecs here.
You will need Podman, as well as distrobox or toolbox.
You will also need the latest release of DaVinci Resolve from Blackmagic's website.
If you're less comfortable in the CLI, I recommend using the setup.sh script from this repository to help simplify the setup process, but ultimately use of the CLI is a requirement.
Important: Ensure lshw is installed on your system, as setup.sh uses it to detect whether you are using an Nvidia GPU or not. This is pre-installed on Universal Blue images, but you may need to install it yourself on other Linux distributions.
AMD uses Mesa's rusticl for OpenCL support in DaVinci Resolve, due various issues with AMD's official option, ROCm. These issues largely stem from the fact that GPU support in ROCm is very limited.
ROCm does remain available as a fallback option:
- Distrobox:
distrobox enter -n davincibox -- /usr/bin/run-davinci rocm - Toolbox:
toolbox run -c davincibox /usr/bin/run-davinci rocm
If ROCm does work better for you and you would like to launch Resolve with ROCm via the desktop shortcut, you can also adjust the DaVinciResolve.desktop file in $HOME/.local/share/applications.
Change the Exec= line as follows:
- Distrobox:
Exec=distrobox-enter -n davincibox -- /usr/bin/run-davinci rocm %u - Toolbox:
Exec=/usr/bin/toolbox run -c davincibox /usr/bin/run-davinci rocm %u
For Intel GPUs, the intel-compute-runtime package is included and used by default.
rusticl is available to test as an alternative for Intel users. Similar to running ROCm for AMD as shown above, you can use run-davinci rusticl in the container to use rusticl instead of the intel-compute-runtime:
- Distrobox:
distrobox enter -n davincibox -- /usr/bin/run-davinci rusticl - Toolbox:
toolbox run -c davincibox /usr/bin/run-davinci rusticl
NVIDIA users will need to install the nvidia-container-toolkit on their host OS. If you are using a Universal Blue image such as Bluefin, this will already be installed. Otherwise, see NVIDIA's installation guide for instructions for your distribution.
Open a terminal, then run chmod +x /path/to/setup.sh
Then, /path/to/setup.sh /path/to/DaVinci_Resolve_versionnumber_Linux.run
If you're more comfortable in a GUI:
If you're using GNOME, open Files and navigate to where you downloaded the script to. In the example below, the script is in the same folder that I extracted the DaVinci Resolve download to. I recommend you do the same for ease of use, as the rest of the instructions will assume you have done so.
Right-click, and select Properties.
Then, make sure "Executable as Program" is toggled on.
Right-click on an empty spot in the folder. You should see either "Open in Console" as in the screenshot, or "Open in Terminal." Either will be fine.
In the newly-opened terminal window, enter the command below. Replace 'version' with the version of DaVinci Resolve that you are installing (see screenshot for example):
./setup.sh ./DaVinci_Resolve_version_Linux.run
Then, follow any further prompts in the installation script.
First, get davincibox set up. There are two different builds of davincibox, depending on whether you use an NVIDIA GPU or not:
NVIDIA Users
Distrobox:
distrobox create -i ghcr.io/zelikos/davincibox:latest --nvidia -n davincibox
Toolbox:
toolbox create -i ghcr.io/zelikos/davincibox:latest -c davincibox
Intel & AMD Users
Distrobox:
distrobox create -i ghcr.io/zelikos/davincibox-opencl:latest -n davincibox
Toolbox:
toolbox create -i ghcr.io/zelikos/davincibox-opencl:latest -c davincibox
On the host, run --appimage-extract on your DaVinci Resolve installer
/path/to/DaVinci_Resolve_version_Linux.run --appimage-extract
Then, run setup-davinci squashfs-root/AppRun distrobox/toolbox from within the container
e.g.
Distrobox:
distrobox enter davincibox -- setup-davinci squashfs-root/AppRun distrobox
Toolbox:
toolbox run --container davincibox setup-davinci squashfs-root/AppRun toolbox
The suffix at the end is for the add-davinci-launcher script. If omitted, setup will still run, but adding the launcher to your application menu won't work.
You can still run add-davinci-launcher separately, as either add-davinci-launcher distrobox or add-davinci-launcher toolbox, depending on what you're using.
After installation completes, you can remove the squashfs-root directory.
After setup, run sudo dnf update in the container to ensure drivers are up to date:
Distrobox:
distrobox enter davincibox -- sudo dnf update
Toolbox:
toolbox run -c davincibox sudo dnf update
Usually, you'll only need to update the packages in the container (i.e. driver updates), not the container image itself. In this case, simply run sudo dnf update in davincibox as shown above.
Otherwise, a full upgrade requires re-creating the davincibox container with the newest version of the image. This should only needed if there has been a new GitHub release for davincibox, as this may include changes to the setup-davinci or add-davinci-launcher scripts. When reporting issues, a full upgrade should be performed first.
If a new version of davincibox is available and you need to upgrade, you can do so manually or with setup.sh.
Run setup.sh upgrade, then follow the installation steps above.
First, run podman image pull ghcr.io/zelikos/davincibox:latest
Then, follow the Uninstallation section below and go through manual setup again.
Run ./setup.sh remove, or
Distrobox:
# If you are upgrading, you can avoid this line
distrobox enter davincibox -- add-davinci-launcher remove
distrobox stop davincibox
distrobox rm davincibox
Toolbox:
# If you are upgrading, you can avoid this line
toolbox run --container davincibox add-davinci-launcher remove
podman container stop davincibox
toolbox rm davincibox
DaVinci Resolve uses ALSA. In davincibox this is supported via the pipewire-alsa plugin, which re-directs sound to pipewire.
This however requires that the host system provides a pipewire server. If your host-system uses some other sound server, this might not work.
You can either convert your host system to provide pipewire or change your davincibox instance to use any sound server you have running.
For example, if your host-system uses pulseaudio, you can change davincibox as follows:
> distrobox-enter -n davincibox
> sudo dnf remove pipewire-alsa
> sudo dnf install alsa-plugins-pulseaudio
Sean Davis, AKA bluesabre
- For putting together this Gist; davincibox's Containerfile and setup scripts were heavily based on that information
Jorge Castro and Universal Blue
- Jorge's blog post about declaring distroboxes planted the seed for davincibox to become a thing
- Pretty much everything on the GitHub CI part of this was originally based on uBlue's Boxkit