Skip to content

Latest commit

 

History

History
74 lines (51 loc) · 1.85 KB

README.md

File metadata and controls

74 lines (51 loc) · 1.85 KB
Raw

FusionManage

FusionManage is a command-line utility to manage VMware Fusion's networking. Unfortunately, there is not an easy way to manage it from the GUI, however this utility should do the trick.

Features:

  • Stop, Start, Restart Networking
  • TCP/UDP Port Forwarding

Code Climate

Getting Started

Install Gem

gem install fusionmanage

Commands

Note: Must be run with sudo

Command-line utility to manage VMware Fusion Networking and Port Forwarding

Usage:
  fusionmanage [-a|--action] [-A|-D] [-p|--protocol] [-i|--ip] [-o|--port]

where [options] are:
-a, --action=<s>      Action to run
-A, --add             Add port forward
-D, --delete          Delete port forward
-p, --protocol=<s>    Protocol to forward
-i, --ip=<s>          IPv4 Address to forward to
-o, --port=<i>        Port to forward

[action] must be one of the following:
  start     Start VMware Fusion Networking
  stop      Stop VMware Fusion Networking
  restart   Restart VMware Fusion Networking
  show      Show All Current Port Forwards
  forward   Add/Delete a Port Forward Mapping

  If action is 'forward' you must specify one of the following:
    -A    Add Port Forward
    -D    Delete Port Forward

  [protocol] must be one of the following:
    tcp   TCP Protocol
    udp   UDP Protocol

  [ip] must be a valid IPv4 address (eg. 192.168.0.10)
  [port] must be a valid port number (1 - 65535)

-h, --help            Show this message

Examples

Forward traffic on host TCP/8080 to VM 192.168.0.10:8080

user@host:~# sudo fusionmanage --action forward -A --protocol tcp --ip 192.168.0.10 --port 8080

Show current port forwards

user@host:~# sudo fusionmanage --action show
TCP Forwards
8080 => 192.168.0.10:8080

UDP Forwards