- https://www.brendangregg.com/perf.html
- https://www.ebpf.top/post/bpf_learn_path/
- http://arthurchiao.art/blog/ebpf-and-k8s-zh/
- http://arthurchiao.art/blog/understanding-ebpf-datapath-in-cilium-zh/
- http://arthurchiao.art/blog/advanced-bpf-kernel-features-for-container-age-zh/
- http://arthurchiao.art/blog/cilium-life-of-a-packet-pod-to-service-zh/
wget https://cdn.kernel.org/pub/linux/kernel/v4.x/linux-4.9.229.tar.xz
tar -xf linux-4.9.229.tar.xz
cd linux-4.9.229.tar.xz
make defconfig
# (optional) 自定义配置.config
make -j10
wget https://busybox.net/downloads/busybox-1.32.0.tar.bz2
tar -xf busybox-1.32.0.tar.bz2
cd busybox-1.32.0
make menuconfig感谢容器技术，把开发人员从日常编译环境依赖的问题中解放出来 🤣
cat << EOF > ./Dockerfile
FROM debian:10.8-slim
RUN apt-get update
RUN apt-get install -y \
bc \
bison \
build-essential \
cpio \
flex \
libelf-dev \
libncurses-dev \
libssl-dev \
vim-tiny
EOF
docker build . -t teeny-linux-builder
docker run -ti -v `pwd`:/teeny teeny-linux-builder
cd busybox-1.32.0
make menuconfig
make -j10 && make installcd busybox-1.32.0/_install
find . | cpio -o --format=newc > root_fs.cpiokvmtool/lkvm run -k /root/yunkun/kvm/linux-4.9.229/arch/x86/boot/bzImage -i ./root_fs.cpio -m 2048
- https://github.com/kvmtool/kvmtool
- https://blog.csdn.net/caojinhuajy/article/details/119277087
- https://www.bilibili.com/read/cv7118525
- https://mgalgs.github.io/2021/03/23/how-to-build-a-custom-linux-kernel-for-qemu-using-docker.html
cd /root
git clone https://mirrors.tuna.tsinghua.edu.cn/git/linux.git
cd linux
git checkout v4.18
cp /boot/config-`uname -r` /root/linux/.config
# 确保 CONFIG_DEBUG_INFO=y
make olddefconfig # or make menuconfig
make -j`nproc`
make -j`nproc` modules_install cd /root/
git clone git://git.qemu-project.org/qemu.git
cd qemu
git checkout v4.1.0
mkdir build && cd build
../configure --target-list=x86_64-softmmu --enable-debug
make -j`nproc`
make installcd /root
wget https://busybox.net/downloads/busybox-1.31.1.tar.bz2
tar -jxvf busybox-1.31.1.tar.bz2Settings -> Build Options -> Build static binary (no shared libs)dd if=/dev/zero of=/root/busybox_rootfs.img bs=1M count=10
mkfs.ext3 /root/busybox_rootfs.img
mkdir rootfs_mount
sudo mount -t ext3 -o loop /root/busybox_rootfs.img /root/busybox-1.31.1/rootfs_mountcd /root/busybox-1.31.1
cat << EOF > ./Dockerfile
FROM debian:10.8-slim
RUN apt-get update
RUN apt-get install -y \
bc \
bison \
build-essential \
cpio \
flex \
libelf-dev \
libncurses-dev \
libssl-dev \
vim-tiny
EOF
docker build . -t busybox-builder
docker run -ti -v `pwd`:/busybox busybox-builder
[container]: cd busybox
# After unpacking and entering the busybox folder, first configure it using make gconfig or make menuconfig, which requires the following options to be enabled.
[container] make menuconfig
[container] make install CONFIG_PREFIX=/busybox/rootfs_mount/
# Finally, to configure busybox init and uninstall rootfs.
[container] mkdir /busybox/rootfs_mount/proc
[container] mkdir /busybox/rootfs_mount/dev
[container] mkdir /busybox/rootfs_mount/etc
[container] cp /busybox/examples/bootfloppy/* /busybox/rootfs_mount/etc/
umount /root/busybox-1.31.1/rootfs_mountqemu-system-x86_64 \
-kernel /root/linux/arch/x86_64/boot/bzImage \
-hda /root/busybox_rootfs.img \
-serial stdio \
-append "root=/dev/sda console=ttyS0 nokaslr"
qemu-system-x86_64 \
-kernel /root/linux/arch/x86_64/boot/bzImage \
-hda /root/busybox_rootfs.img \
-serial stdio \
-append "root=/dev/sda console=ttyS0 nokaslr" \
-s -S
gdb /root/linux/vmlinux # 指定调试文件为包含调试信息的内核文件
(gdb) target remote:1234
(gdb) b start_kernel
(gdb) c